Adaptive Filter | ADPCM | ADSP | ADSP-2181 | Aliasing | AMR | Anti-Aliasing | ARMA | Autocorrelation | AutoCovariance | Beamforming | Bessel | Blackfin | Butterworth | C6713 | CCS | Chebyshev | CIC Filter | Circular Convolution | Code Composer Studio | Comb Filter | Compression | Convolution | Cross Correlation | DCT | Decimation | Deconvolution | Demodulation | DM642 | DSP Boards | DSP/BIOS | DTMF | Echo Cancellation | Equalization | Equalizer | ETSI | EZLITE (Ez-kit Lite) | FFT | FFTW | FIR Filter | Fixed Point | FSK | G.711 | G.723 | G.729 | Gaussian Noise | Goertzel | GPIO | Hilbert Transform | IFFT | IIR Filter | Interpolation | Invariance | JTAG | Kalman | Laplace Transform | Levinson | LPC | McBSP | MIPS | Modulation | MPEG | Multirate | Notch Filter | Nyquist | OFDM | Oversampling | Pink Noise | Pitch | PLL | Polyphase | QAM | QDMA | Quantization | Quantizer | Radar | Random Noise | Reed Solomon | Remez | Resampling | RTDX | Sampling | Sharc | TI C6711 | Undersampling | Viterbi | Wavelets | White Noise | Wiener Filter | Windowing | XDS510PP | Z Transform

I want to use Visual DSP++ 3.5 to talk to an old 21061 EZ-Kit lite (and
eventually a 21065L EZ-Kit) via RS-232.  However, I can't seem to set-up an
appropriate session in Visual DSP++ 3.5.  In the New Session dialog box, I don't
seem to have the option listed for the 21061 EZ-Kit.  Under Debug target, I do
see "EZ-KIT Lite (ADSP-21xxx)".  I choose that, but now my only choices for
processor are the 21160, 21161, or 21262.  Nothing for the 210xx parts.

I tried using the Configurator tool to create a Platform.  I created a
"ADSP-21061 EZ-KIT Lit via COM port" platform, but it never shows up in the New
Session dialog box.

I've tried multiple un-installs/re-installs, making sure all components are
installed.  I've tried this on 2 different PCs, one with Win2K and the other
with Win98.  I also had an old 2.0 version of the software hanging around so I
tried with that with similar results.

What am I missing?  Is there some licensing issues that prevent certain products
from appearing?  My license is listed as "Validated (Permanent)".

Thanks!
-Jon

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

>What am I missing?  Is there some licensing issues that prevent certain
products
>from appearing?  My license is listed as "Validated (Permanent)".

Same issue here!

I cannot program the darn thing...
Is there a solution for this. It seems that the ez-kit adsp-21061 is
simply missing from the config menu.

grt.
gtek


		
This message was sent using the Comp.DSP web interface on
www.DSPRelated.com

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

I ended up trying several different versions of VisualDSP, and eventually found
one that worked.  I believe it was version 3.0.  I never found any explanation
as to why this would be.  I was able to find quite a few old versions on the
Analog Devices web site for download.

-- 
Jon Harris
SPAM blocked e-mail address in use.  Replace the ANIMAL with 7 to reply.


"gtek" <g...@hotmail.com> wrote in message
news:0...@giganews.com...
> >What am I missing?  Is there some licensing issues that prevent certain
> products
> >from appearing?  My license is listed as "Validated (Permanent)".
>
> Same issue here!
>
> I cannot program the darn thing...
> Is there a solution for this. It seems that the ez-kit adsp-21061 is
> simply missing from the config menu.
>
> grt.
> gtek
>
>
>
> This message was sent using the Comp.DSP web interface on
> www.DSPRelated.com

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

Jon,

Exactly the same problem here!

Have you found a solution?

grt.

Evert

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

Well,

The answer to these problems is very simple.
Analog devices DID not provide support in later versions then visual dsp
3.0.
Very odd is the fact that support is somehow still implemented in the
configurator. Only some config files seems to be missing, which causes
visual dsp versions beyond 3.0 to produce .csv errors on loading.
I copied these csv files:
- Regfile61_EZKIT.csv ( in system directory visualdsp )
- Regfile.csv ( ""      "" )

into the visual dsp3.5 directory, but still some errors, but not that it
is missing the csv files!!

help needed!

grt.

Gtekprog
		
This message was sent using the Comp.DSP web interface on
www.DSPRelated.com

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

YEAH!!!

Visual dsp 3.0, 3.5 and 4.0 are working with the adsp-21061 EZ-lite kit
now!!. Analog device wouldn't provide a fix, because they don't support
the adsp-21061 ez-lite kit anymore.

The fix is as follow:

Download these csv files and put them into your visualdsp/system
directory.

http://62.216.16.167/evert/csv_adsp.zip

load the configurator and select the adsp-21061

that's it.

Feel free to ask me any question.
Have fun.

Evert verduin

g...@hotmail.com


		
This message was sent using the Comp.DSP web interface on
www.DSPRelated.com

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

Hello
 
 Does anybody still have these csv files required to run Ez-kit 21061 Lite
under Visual DSP++ 4.0? I've become a happy owner of that board and 
i'm trying to use one. Thanks in advance.

 Best regards
  braton (braton[at]gmail[dot]com)

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

>Hello
> 
> Does anybody still have these csv files required to run Ez-kit 21061
Lite
>under Visual DSP++ 4.0? I've become a happy owner of that board and 
>i'm trying to use one. Thanks in advance.
>
> Best regards
>  braton (braton[at]gmail[dot]com)
>
>
>

I still have those!
My IP was changed after i moved into a new house. The only thing is that
my own machine is still packed in a cardboard box in the attick. I have no
clue which out of the 50 boxes holds my computer ;-)

I will send these as soon as possible.


Regards,

Evert

Drop me a line to remember me:
ebverduin(REMOVE FOR SPAM)wanadoo.nl  
replace (REMOVE FOR SPAM) by an @ sign

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

Can anyone who posseses my zip file ( the ones who i send it to ) please
drop me the zip file. As i lost it when my server died..

Tnx

Evert













>>Hello
>> 
>> Does anybody still have these csv files required to run Ez-kit 21061
>Lite
>>under Visual DSP++ 4.0? I've become a happy owner of that board and 
>>i'm trying to use one. Thanks in advance.
>>
>> Best regards
>>  braton (braton[at]gmail[dot]com)
>>
>>
>>
>
>I still have those!
>My IP was changed after i moved into a new house. The only thing is that
>my own machine is still packed in a cardboard box in the attick. I have
no
>clue which out of the 50 boxes holds my computer ;-)
>
>I will send these as soon as possible.
>
>
>Regards,
>
>Evert
>
>Drop me a line to remember me:
>ebverduin(REMOVE FOR SPAM)wanadoo.nl  
>replace (REMOVE FOR SPAM) by an @ sign
>
>
>



_____________________________________
Do you know a company who employs DSP engineers?  
Is it already listed at http://dsprelated.com/employers.php ?

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

Found the csv files! ( 01-07-2007 )
You will need these if you want to get the 21061 Ezkit working with
visualdsp 4.0

Drop me a message if you need those files!

ebverduin(SP@MREMOVE)@wanadoo.nl ( remove the obvious )



>Can anyone who posseses my zip file ( the ones who i send it to ) please
>drop me the zip file. As i lost it when my server died..
>
>Tnx
>
>Evert
>
>
>
>
>
>
>
>
>
>
>
>
>
>>>Hello
>>> 
>>> Does anybody still have these csv files required to run Ez-kit 21061
>>Lite
>>>under Visual DSP++ 4.0? I've become a happy owner of that board and 
>>>i'm trying to use one. Thanks in advance.
>>>
>>> Best regards
>>>  braton (braton[at]gmail[dot]com)
>>>
>>>
>>>
>>
>>I still have those!
>>My IP was changed after i moved into a new house. The only thing is
that
>>my own machine is still packed in a cardboard box in the attick. I have
>no
>>clue which out of the 50 boxes holds my computer ;-)
>>
>>I will send these as soon as possible.
>>
>>
>>Regards,
>>
>>Evert
>>
>>Drop me a line to remember me:
>>ebverduin(REMOVE FOR SPAM)wanadoo.nl  
>>replace (REMOVE FOR SPAM) by an @ sign
>>
>>
>>
>
>
>
>_____________________________________
>Do you know a company who employs DSP engineers?  
>Is it already listed at http://dsprelated.com/employers.php ?
>

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.