Adaptive Filter | ADPCM | ADSP | ADSP-2181 | Aliasing | AMR | Anti-Aliasing | ARMA | Autocorrelation | AutoCovariance | Beamforming | Bessel | Blackfin | Butterworth | C6713 | CCS | Chebyshev | CIC Filter | Circular Convolution | Code Composer Studio | Comb Filter | Compression | Convolution | Cross Correlation | DCT | Decimation | Deconvolution | Demodulation | DM642 | DSP Boards | DSP/BIOS | DTMF | Echo Cancellation | Equalization | Equalizer | ETSI | EZLITE (Ez-kit Lite) | FFT | FFTW | FIR Filter | Fixed Point | FSK | G.711 | G.723 | G.729 | Gaussian Noise | Goertzel | GPIO | Hilbert Transform | IFFT | IIR Filter | Interpolation | Invariance | JTAG | Kalman | Laplace Transform | Levinson | LPC | McBSP | MIPS | Modulation | MPEG | Multirate | Notch Filter | Nyquist | OFDM | Oversampling | Pink Noise | Pitch | PLL | Polyphase | QAM | QDMA | Quantization | Quantizer | Radar | Random Noise | Reed Solomon | Remez | Resampling | RTDX | Sampling | Sharc | TI C6711 | Undersampling | Viterbi | Wavelets | White Noise | Wiener Filter | Windowing | XDS510PP | Z Transform

Dear all,
I have some boards from sundance (SMT310Q: carrier board with JTAG-xds510
SMT361A: DSP TMS320C6416D10), I installed CCS 2.2 but it couldn't connect
to the boards. I installed CCS 3.2(beta 2), It has sundance modules in
Code Composer Setup, but the i didn't found modules SMT310Q & SMT361A
among them.
I want to know, if these boards can work with this version of CCS and if
yes, how i can setup the boards.
best regards.

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

mehran_655 wrote:
> Dear all,
> I have some boards from sundance (SMT310Q: carrier board with JTAG-xds510
> SMT361A: DSP TMS320C6416D10), I installed CCS 2.2 but it couldn't connect
> to the boards. I installed CCS 3.2(beta 2), It has sundance modules in
> Code Composer Setup, but the i didn't found modules SMT310Q & SMT361A
> among them.
> I want to know, if these boards can work with this version of CCS and if
> yes, how i can setup the boards.
> best regards.
> 

No, CCS 3.2 cannot be used with that board.  CCS 3.2 is for use with 
64x+ devices only (e.g. TMS320C6455 or TMS320DM6446).  CCS 3.1 should be 
used for 64x devices such as the 6416.

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.