Hi
I am new for BF527 ,how to memory 2Dimage transfer from DMA manager
Posted by: r...@yahoo.com
_____________________________________
BF527
Started by ●July 18, 2014
Reply by ●July 18, 20142014-07-18
Howdy Rammar,
I'm glad you found the ADSP group. I think you will get a lot more help
and possibly an answer already posted if you look here:
https://ez.analog.com/community/dsp/blackfin-processors
If you start reading at page 190 in the hardware manual:
http://www.analog.com/static/imported-files/processor_manuals/ADSP-BF52x_hwr_rev1.2.pdf
it tells you everything you need to know. Just set up the registers and
let it go - it works!
Patience, persistence, truth,
Dr. Mike
On Fri, 18 Jul 2014, r...@yahoo.com [adsp] wrote:
> Date: Fri, 18 Jul 2014 00:49:29 -0400
> From: "r...@yahoo.com [adsp]"
> Reply-To: r...@yahoo.com
> To: a...
> Subject: [adsp] BF527
>
> Hi
> I am new for BF527 ,how to memory 2Dimage transfer from DMA manager
>
Posted by: Mike Rosing
_____________________________________
I'm glad you found the ADSP group. I think you will get a lot more help
and possibly an answer already posted if you look here:
https://ez.analog.com/community/dsp/blackfin-processors
If you start reading at page 190 in the hardware manual:
http://www.analog.com/static/imported-files/processor_manuals/ADSP-BF52x_hwr_rev1.2.pdf
it tells you everything you need to know. Just set up the registers and
let it go - it works!
Patience, persistence, truth,
Dr. Mike
On Fri, 18 Jul 2014, r...@yahoo.com [adsp] wrote:
> Date: Fri, 18 Jul 2014 00:49:29 -0400
> From: "r...@yahoo.com [adsp]"
> Reply-To: r...@yahoo.com
> To: a...
> Subject: [adsp] BF527
>
> Hi
> I am new for BF527 ,how to memory 2Dimage transfer from DMA manager
>
Posted by: Mike Rosing
_____________________________________