DSPRelated.com
Online · Live + on demand
February 9-11, 2027
Price goes up Jan 1: register now to lock in today's rate
Register Now →

RF in Slow Motion: Sonifying a Wi-Fi 7 Packet

Dan BoschenDan Boschen ● October 17, 2025●2 comments

What would a 160 MHz OFDM waveform up in the 5 GHz U-NII band sound like if scaled to audio frequencies to keep the same wavelength (acoustic vs RF)?


Add the Hilbert Transformer to Your DSP Toolkit, Part 1

Neil RobertsonNeil Robertson ● November 22, 2022●4 comments

Learn how the Hilbert transformer creates a 90-degree phase-shifted quadrature component without down-conversion, and why it is simply a special FIR filter. Part 1 defines the transformer, derives its ideal frequency response H(ω)=j for ω<0 and -j for ω≥0, and walks through Matlab examples that demonstrate phase shifting and image attenuation for bandpass signals.


Learn About Transmission Lines Using a Discrete-Time Model

Neil RobertsonNeil Robertson ● January 12, 2022●2 comments

A simple discrete-time approach makes lossless transmission-line behavior easy to simulate and visualize. The post introduces MATLAB functions tline and wave_movie to model uniform lossless lines with resistive terminations, compute time and frequency responses, and animate travelling waves. A microstrip pulse example shows how reflections produce ringing and how source matching nearly eliminates it, making this a practical learning tool.


Simulink-Simulation of SSB demodulation

Josef HoffmannJosef Hoffmann ● June 13, 2021●1 comment

This post walks through Simulink models that implement SSB demodulation and modulation, using Richard Lyons' phasing method as a foundation. It shows practical models for simple carrier multiplication and for the phasing method with cosine and -sin paths plus Hilbert filtering, and it highlights sampling, decimation, filter choices, and delay alignment to make the techniques work in simulation.


Setting Carrier to Noise Ratio in Simulations

Neil RobertsonNeil Robertson ● April 11, 2021

Setting the right Gaussian noise level is easy once you know the math. This post derives simple, practical equations to compute noise density and the rms noise amplitude needed to achieve a target carrier to noise ratio at a receiver output. It shows how to get the noise-equivalent bandwidth from a discrete-time filter, how to compute N0 and sigma, and includes a MATLAB set_cnr function to generate the noise vector.


Adaptive Beamforming is like Squeezing a Water Balloon

Christopher HogstromChristopher Hogstrom ● January 9, 2021●4 comments

Think of adaptive beamforming as squeezing a water balloon, a simple analogy that reveals how combining multiple antennas creates focused gains and deep nulls. This post walks through the MVDR (Wiener-filter–based) solution, explains steering and scanning vectors, and shows how array geometry and known signal direction control what you can and cannot cancel. Practical tips highlight limits like the N-1 interferer rule.


Design Square-Root Nyquist Filters

Neil RobertsonNeil Robertson ● July 13, 2020

A multirate signal processing textbook presents a neat method for designing square-root Nyquist FIR filters that combine zero ISI with strong stopband attenuation. This post walks through the principle that matched transmit and receive filters need square-root Nyquist responses, gives the key design relations for excess bandwidth and stopband edge, and includes a Matlab implementation to produce practical FIR matched filters for QAM-style systems.


Third-Order Distortion of a Digitally-Modulated Signal

Neil RobertsonNeil Robertson ● June 9, 2020

Amplifier third-order distortion is a common limiter in RF and communications chains, and Neil Robertson walks through why it matters using hands-on MATLAB simulations. He shows how a cubic nonlinearity creates IMD3 tones, causes spectral regrowth and degrades QAM constellations, and gives practical notes on estimating k3, computing ACPR from PSDs, and sampling considerations.


Model Signal Impairments at Complex Baseband

Neil RobertsonNeil Robertson ● December 11, 2019●7 comments

Neil Robertson presents compact complex-baseband channel models for common signal impairments, implemented as short Matlab functions of up to seven lines. Using QAM examples and constellation plots, he demonstrates how interfering carriers, two-path multipath, sinusoidal phase noise, and Gaussian noise distort constellations and affect MER. The examples are lightweight and practical, making it easy to test receiver diagnostics and prototype adaptive-equalizer scenarios.


Compute Modulation Error Ratio (MER) for QAM

Neil RobertsonNeil Robertson ● November 5, 2019●2 comments

Neil Robertson shows how to define and compute Modulation Error Ratio (MER) for QAM using a simplified baseband model and decision-slice errors. The post derives per-symbol and averaged MER formulas, explains when MER tracks carrier-to-noise ratio under AWGN and matched root-Nyquist filters, and provides example Pav values for QAM-16 and QAM-64 plus a Matlab script and practical tips.


A Quadrature Signals Tutorial: Complex, But Not Complicated

Rick LyonsRick Lyons ● April 12, 2013●66 comments

Quadrature signals are essential in modern communications, yet complex numbers and the j operator intimidate many engineers. In this tutorial Rick Lyons uses phasor geometry, three-dimensional time and frequency plots, and practical I/Q sampling examples to demystify complex exponentials, negative frequency, and how to generate baseband complex signals. Read to get physical intuition and hands-on rules you can apply to modulation, demodulation, and DSP implementations.


Minimum Shift Keying (MSK) - A Tutorial

Qasim ChaudhariQasim Chaudhari ● January 25, 2017●17 comments

How does MSK achieve both excellent spectral efficiency and a constant-envelope signal suitable for nonlinear amplifiers? This tutorial builds MSK step‑by‑step from binary FSK, shows the minimum frequency spacing and continuous‑phase construction, and then recasts MSK as an OQPSK (pseudo‑symbol) representation. It finishes by generalizing MSK into CP‑FSK and the wider CPM family so you can connect practical pulse shapes and modulation indices to performance.


Sum of Two Equal-Frequency Sinusoids

Rick LyonsRick Lyons ● September 4, 2014●6 comments

Rick Lyons exposes a frequent trig mistake and delivers complete closed-form expressions for collapsing two equal-frequency sinusoids into a single sinusoid. Using complex-exponential phasor addition and equating real and imaginary parts, he compiles easy-to-use tables for cosine+cosine, sine+sine, and cosine+sine cases and shows how to derive each form. Engineers get corrected identities and compact derivations useful for analysis and communications.


Understanding the 'Phasing Method' of Single Sideband Demodulation

Rick LyonsRick Lyons ● August 8, 2012●31 comments

Rick Lyons explains how the phasing method separates overlapping single sideband transmissions using quadrature processing and the Hilbert transform, making SSB demodulation practical in crowded RF environments. After reviewing simple synchronous detection, he walks through spectra and block diagrams that show how complex downconversion produces i and q paths which reinforce the desired sideband and cancel the other. The post also covers DSP implementation tips and BFO error effects.


Digital Envelope Detection: The Good, the Bad, and the Ugly

Rick LyonsRick Lyons ● April 3, 2016●23 comments

Envelope detection sounds simple, but implementation choices change everything. Rick Lyons gathers common digital detectors, including half-wave, full-wave, square-law, Hilbert-based complex, and synchronous coherent designs, and explains how harmonics, filtering, and carrier recovery change results. He ranks detectors by output SNR from a representative simulation and offers practical tips on filter cutoff, Hilbert transformer bandwidth, and when a simple detector is good enough.


Handling Spectral Inversion in Baseband Processing

Eric JacobsenEric Jacobsen ● February 11, 2008●11 comments

Spectral inversion often sneaks in during RF and IF mixing chains and can break downstream demodulation. Eric Jacobsen shows that at baseband you can correct inversion with three trivial, equivalent operations: invert Q, swap I and Q, or invert I, and he explains the math and geometric intuition behind each. The fixes work in modulators or demodulators and tolerate arbitrary phase offsets.


Understanding and Relating Eb/No, SNR, and other Power Efficiency Metrics

Eric JacobsenEric Jacobsen ● May 29, 2012●2 comments

Eric Jacobsen untangles the common confusion around Eb/N0, SNR, Es/No and related power-efficiency metrics, showing when each metric applies and how to convert between them. He covers practical measurement techniques including spectrum-analyzer and slicer-based estimates, the impact of symbol rate, modulation order and FEC code rate, and offers simple sanity checks to catch common dB and factor-of-two errors. Engineers get a concise toolkit for accurate comparisons.


A Beginner's Guide to OFDM

Qasim ChaudhariQasim Chaudhari ● May 1, 2017●6 comments

Orthogonal Frequency Division Multiplexing made modern high-speed wireless practical by turning one fast serial bitstream into many slow parallel streams carried on orthogonal sinusoids. This beginner guide explains, with minimal math, how the iDFT/DFT pair builds OFDM, how spectral slicing makes each subcarrier effectively flat so equalization reduces to simple divisions, and why a cyclic prefix prevents inter-symbol interference.


Digital PLL's -- Part 1

Neil RobertsonNeil Robertson ● June 7, 2016●26 comments

A hands-on introduction to time-domain digital phase-locked loops, Neil Robertson builds a simple DPLL model in MATLAB and walks through the NCO, phase detector, and PI loop filter implementations. The post uses phase-in-cycles arithmetic to show how the phase accumulator, detector wrapping, and loop filter interact, and it contrasts linear steady-state behavior with the nonlinear acquisition seen when initial frequency error is large. Part 2 will cover frequency-domain tuning of the loop gains.


Pulse Shaping in Single-Carrier Communication Systems

Eric JacobsenEric Jacobsen ● April 10, 2008●33 comments

Eric Jacobsen clears up common confusion around pulse shaping in single-carrier communications, focusing on matched filtering, Nyquist filtering, and related terminology. He uses the NRZ rectangular pulse as a concrete example to show how the transmit spectrum becomes a sinc envelope when the bitstream has enough randomness, and he highlights how bit patterns and context-sensitive terms can change the observed behavior.