hello, i am currently working on a project with the adsp21065L-EVM and VisualDSP. If anyone has some experience with the...

hello, i am currently working on a project with the adsp21065L-EVM and VisualDSP. If anyone has some experience with the VisualDSP environment, i'd like to get in contact. especially the linker gives me trouble. anyway, have a nice day Michael --

Hello I am trying to use VisualDSP++ 4.0 Automation for transfering matrices from matlab to visualdsp and reading memory. I have...

Hello I am trying to use VisualDSP++ 4.0 Automation for transfering matrices from matlab to visualdsp and reading memory. I have been able to open visualdsp,changing directory and setting session but unable to load project,build project and run project . Anyone having idea how to com

Hello list, I had to uninstall VisualDSP++ 3.5 this morning as it would not open a debug session, and I installed VisualDSP++ 4.0 which...

Hello list, I had to uninstall VisualDSP++ 3.5 this morning as it would not open a debug session, and I installed VisualDSP++ 4.0 which I downloaded from the Analog Devices site. I'm trying to build a project that worked just fine on Friday evening but is now giving me the following error: ----------------Configuration: *ProjectName* -

Dear Members, recently I installed VisualDSP++ 3.0 for Blackfin and Sharc. Before I had only VisualDSP++ 3.0 for 21xx. I done the...

Dear Members, recently I installed VisualDSP++ 3.0 for Blackfin and Sharc. Before I had only VisualDSP++ 3.0 for 21xx. I done the procedure according the guide of ADI, but now they do not work properly. The next which I tried was that I uninstalled everithing and I i

where to find VisualDSP++ for adsp-2171?? they have VisualDSP++ for adsp-2183 and up only thanks

where to find VisualDSP++ for adsp-2171?? they have VisualDSP++ for adsp-2183 and up only thanks

Hello, I have problem with VisualDSP++ 3.0 I use ADSP-21160 as target on Ez-kit Lite. General tab in about dialog: ...

Hello, I have problem with VisualDSP++ 3.0 I use ADSP-21160 as target on Ez-kit Lite. General tab in about dialog: VisualDSP++ 3.0 IDDE Version: Version 6.0.0.0 Build Date: Aug 9 2002 Installation Directory: C:\Program Files\Analog Devices\Visua

Hi, I read visualDSP documentation about Tcl script. Is it possible to run VisualDSP load program to Ezkit and exit form VDSP? ...

Hi, I read visualDSP documentation about Tcl script. Is it possible to run VisualDSP load program to Ezkit and exit form VDSP? Of course when I use "idde -f tclsript" form command line VDSP is executed but If exist switch which not shows main application window

Has anyone had issues with the VisualDSP output window or any other windows not docking? I'm using VisualDSP 3.5 and cannot seem to get the...

Has anyone had issues with the VisualDSP output window or any other windows not docking? I'm using VisualDSP 3.5 and cannot seem to get the output window to dock. The allow docking drop down box nevers get checked when I click it.

hello, i work on the EZ KIT LITE 2191 and i have do a fir filter... it work (on VisualDSP++ 3.5) but i would like to do a .bat file for ...

hello, i work on the EZ KIT LITE 2191 and i have do a fir filter... it work (on VisualDSP++ 3.5) but i would like to do a .bat file for programming the DSP without open VisualDSP++ 3.5 (with matlab...) but the compil.bat file that i have create doesn't work !!!the error is ; [Error li1130] "C:\Program Files\Analog Devices\VisualDSP 3.5 16-

Hi! I started using Visualdsp++4.5 for my projects recently............ Actually in Visualdsp 3.5 and 4.0 i can fing the option Expert...

Hi! I started using Visualdsp++4.5 for my projects recently............ Actually in Visualdsp 3.5 and 4.0 i can fing the option Expert linker in the Tools menu ....... But in Visualdsp4.5 i didn't found Expert linker in Tools memu....... In that Tools menu there are 2 options: 1.Trace and 2.Statistical profiling.. No Expert Linker option is there.........,,,,, How can access Expe...

Did you ever find the problem here. I am having what might be the same problem. > > > > Hy all, > >I have just...

Did you ever find the problem here. I am having what might be the same problem. > > > > Hy all, > >I have just installed the VisualDSP++3.5 release ... I get ready for the >worst !!! >I've only tested the program wit

Hello, I use VisualDSP++ 3.1 with the Blackfin Apex ICE on an ADSP-BF532. After setting a breakpoint its not possible to make a...

Hello, I use VisualDSP++ 3.1 with the Blackfin Apex ICE on an ADSP-BF532. After setting a breakpoint its not possible to make a single step. The emulator always goes to an interrupt function and not to the expected instruction. Is it possible to disable the interrupts in

Hi all, I would like to know if I can connect 2 ADSP board (mine is 21992) to 1 PC only. My PC has 2 USB ports and I use...

Hi all, I would like to know if I can connect 2 ADSP board (mine is 21992) to 1 PC only. My PC has 2 USB ports and I use VisualDSP++ 3.0. If someone has experiences in this arrangement, please share it to me soon. I will use VisualDSP++ not only to write, compile

earlierly,when i tried to start up the VisualDSP++ Environment by double-click the icon, there is no response all the time. Then i uninstalled it...

earlierly,when i tried to start up the VisualDSP++ Environment by double-click the icon, there is no response all the time. Then i uninstalled it and installed it again, the result was unchanged. i donot know what's the problem. Who could tell me what's the problem? Any help appreciated, maoqi --------------------------------- Mp3?????-?¸?????????

Hello world .... running VisualDSP++ 3.0 (pretty old version , I know) with a given dpj-file I get the error message "Unable to open/parse...

Hello world .... running VisualDSP++ 3.0 (pretty old version , I know) with a given dpj-file I get the error message "Unable to open/parse architecture definition file". Changing to a newer version of VisualDSP would solve the problem but for reproducibilty reasons I start with this old version. Thanks Franz Zimmermann

Hi, I am looking for a FFT program running with the ADSP2181 on Visualdsp simulator environment. Do you have a such code...

Hi, I am looking for a FFT program running with the ADSP2181 on Visualdsp simulator environment. Do you have a such code example? Thank you in advance. Best regards.

Hello. First I would like to say that I have ask this question again some days ago, I am not sure if it is posted somewhere though. I am...

Hello. First I would like to say that I have ask this question again some days ago, I am not sure if it is posted somewhere though. I am searching and cannot find it, I had done some things wrong with my registration so perhaps it has not been posted. So, if someone is disturbed, I am apologizing. My problem is that in the VisualDSP compiler all numbers are represented in 32 bit format, a si...

Hi, I'm having problems installing VisualDSP++ 3.5 for 32 bits under Win98SE (Spanish) running on a laptop. Everything goes...

Hi, I'm having problems installing VisualDSP++ 3.5 for 32 bits under Win98SE (Spanish) running on a laptop. Everything goes fine, until almost the end of the "Copying new files" step; from that point (almost at the end, when everything is almost done), it start

Hello Group, I'm currently using VisualDSP++ 3.5 with the Nov '04 patch and occasionally get "connection to the target" error...

Hello Group, I'm currently using VisualDSP++ 3.5 with the Nov '04 patch and occasionally get "connection to the target" error messages when I stop and restart a session. It gets to a point where I have to restart my machine in order to reconnect to the hardware and the session. It happens only with the USB-ICE tool from ADI when using the EZ

Has anybody been using the function fir() in VisualDSP++? I just started testing it this morning and I haven't been able to...

Has anybody been using the function fir() in VisualDSP++? I just started testing it this morning and I haven't been able to get repeatable results running it multiple times against the same data set. It seems to be seriously broken. In the below pse