Hi, I have a cypress CY7C68001 connected to CE3 and 100MHz SDRAM connected to CE0. SDRAM must run at 100MHz. CY7C68001 needs a data...

Hi, I have a cypress CY7C68001 connected to CE3 and 100MHz SDRAM connected to CE0. SDRAM must run at 100MHz. CY7C68001 needs a data write hold time of 10 ns and a address write hold time of 70ns! On a C6713 I can set WR HOLD to 3. With 100MHz ECLKIN/ECLKOUT I can only get 30ns. Any idea how I can get out of this mess without a HW change?

In C6713' datasheet, maximum overshoot and undershoot on input pins is 4V and -0.7V. In my design with C6713, maximum overshoot and undershoot...

In C6713' datasheet, maximum overshoot and undershoot on input pins is 4V and -0.7V. In my design with C6713, maximum overshoot and undershoot on input pins is 4.4V and -1V. Violation is 0.4V, is it dangerous for my design? How can I reduce overshoot and undershoot without any change in trace delay? Regards Zahra

Hi All, Based on the dsk_app example of the C6713, I am trying to do some multirate signal processing on the audio signals. I use the Int32...

Hi All, Based on the dsk_app example of the C6713, I am trying to do some multirate signal processing on the audio signals. I use the Int32 type audio samples that the example provides. I also have my filter coefficients as Int16. Here is my filter code: blksize is the numner of samples in the block of input samples. taps is the number of taps in my filter data is the input coeff...

And the attachment is just added.   --- On Sat, 7/10/10, Wave Waves wrote: From: Wave Waves Subject: C6713 DSK _ OUTPUTING VIA...

And the attachment is just added.   --- On Sat, 7/10/10, Wave Waves wrote: From: Wave Waves Subject: C6713 DSK _ OUTPUTING VIA EMIF To: r...@lewiscounty.com, c...@yahoogroups.com Date: Saturday, July 10, 2010, 6:39 PM Dear Williams, As we discussed about driving EMIF before, I tested lots of solutions and prgrams from making an uotput via EMIF . **

Hello, I am using McBSP configured as a SPI slave to transfer data from C6713 to a computer with EDMA feeding 128 element frames into McBSP and...

Hello, I am using McBSP configured as a SPI slave to transfer data from C6713 to a computer with EDMA feeding 128 element frames into McBSP and EDMA transfer complete interrupts invoking new frame transfers. The problem is that during almost every frame the transfer stalls at some point resulting the rest of the received frame to be zeroes. The transfer recovers when the next frame boundary nor...

Hi, > > I have purchased the Digital Signal Processing and Applications with > C6713 and C6416 DSK by Rulph Chassing a couple of year ago....

Hi, > > I have purchased the Digital Signal Processing and Applications with > C6713 and C6416 DSK by Rulph Chassing a couple of year ago. I want to > work with this now but I realized that I misplaced the CD-ROM. I cannot > run the examples in the book with out the CD. I was wondering if anyone > who has this book can send me the folders on the CD-ROM or atleast send > me a link to a site th

Hi, I have purchased the Digital Signal Processing and Applications with C6713 and C6416 DSK by Rulph Chassing a couple of year ago. I want...

Hi, I have purchased the Digital Signal Processing and Applications with C6713 and C6416 DSK by Rulph Chassing a couple of year ago. I want to work with this now but I realized that I misplaced the CD-ROM. I cannot run the examples in the book with out the CD. I was wondering if anyone who has this book can send me the folders on the CD-ROM or atleast send me a link to a site that has this...

Hi, I am using a precision ADC ADS8556 (TI's document SBAS404A) on my board interfaced to a C6713 DSP through a McASP. I have the...

Hi, I am using a precision ADC ADS8556 (TI's document SBAS404A) on my board interfaced to a C6713 DSP through a McASP. I have the GPIO5/EXT_INT5 pin of the DSP connected to the CONVST_x pins of the ADS8556. The CONVST_x pin has to be synchronized with the Frame-sync from the McASP. (please look at page 14 of SBAS404A ADC datasheet for the serial interface timing). Can I synchronize...

Hi I am new to DSP kit and we are implementing our final year degree project on it. I am facing some of very basic issues. C6713 is little...

Hi I am new to DSP kit and we are implementing our final year degree project on it. I am facing some of very basic issues. C6713 is little endain by default. We have to interface emif data pins with AD9220 (ADC) 12 bit with bit 1(MSB) and bit 12(LSB). There are 32 data pins on the emif connector. But the confusion is that which pins should be interfaced with the ADC pin 0 to pin 11 or pin 20 ...

Dear All, I have started working on the C6713. I want to check the output of the McBSP on the oscilloscope. Is is possible to check the output...

Dear All, I have started working on the C6713. I want to check the output of the McBSP on the oscilloscope. Is is possible to check the output from the McBSP on an analog oscilloscope?? Please provide me some code that writes somethong on the McBSP and gives the output. And how can I check the output?? Any response in this regard would be helpful. Thanks Wajahat

Hi: I will be teaching on March 19 a 1-day hands-on workshop on the C6713/C6416 DSK at ICASSP '05 in Philadelphia. There is...

Hi: I will be teaching on March 19 a 1-day hands-on workshop on the C6713/C6416 DSK at ICASSP '05 in Philadelphia. There is NO Fee for the workshop with each participant getting a free DSK. Materials for the workshop are based on my book: "Digital Signal Processing

Hi, I am using a TI DSP C6713. In the design, the McASP1 is connected to the control interface of ADC ADS8556 as well as the serial data...

Hi, I am using a TI DSP C6713. In the design, the McASP1 is connected to the control interface of ADC ADS8556 as well as the serial data interface. I am trying to program the ADC ADS8556 using McASP and have a couple of questions. 1) Can we program the ADS8556 (precision A to D Converter) using McASP? 2) After initialization of McASP, I can see clock and framesync (probed on t...

Hi, I encounter memory problems when I try to run my code. I work on CCS 3.1 and with C6713 DSP chip (Simulator). Each time I try to run I...

Hi, I encounter memory problems when I try to run my code. I work on CCS 3.1 and with C6713 DSP chip (Simulator). Each time I try to run I get the following error: ------------------------------------------------------------------------ Error: Memory Map Error: READ access by CPU to address 0x79de0, which is RESERVED in Hardware. Trouble running Target CPU: Memory Map Error: READ ac...

I am doing host to target communication part of my project. My requirement is that : Decoder on C6713 is exchanging frames sequentially...

I am doing host to target communication part of my project. My requirement is that : Decoder on C6713 is exchanging frames sequentially as they are decoded with by target and writing frames to yuv file one after other. Now I want to design some application, which runs in VC++ and reads this file. It will read each frame as is decoded and written by target on host yuv file, a...

Dear all Let me to explain my problem. I want to use JTAG for connect target (C6713 board not C6713DSK) and emulator. I have a big program and I...

Dear all Let me to explain my problem. I want to use JTAG for connect target (C6713 board not C6713DSK) and emulator. I have a big program and I want to save total of program on flash, then by secondary boot loader copy them to IRAM on DSP for running. How can I program flash? Is Gel file programmed on flash? Is it possible to program flash on board by DSP? For have a secondary boot loading, ...

hi all. I meet a strange problem about the C6713 HPI. The dsp and the host can work well at most time, but sometimes it...

hi all. I meet a strange problem about the C6713 HPI. The dsp and the host can work well at most time, but sometimes it goes wrong. After the dsp sets the HINT bit of HPIC, the host can get the intterrupt, but when the host want to clear the HINT bit, the HPI's HRDY will always be high after the HCS's falling edge! Since then ,the host and the dsp can't work well. I...

All, Has anyone else come across problems using spread spectrum clock generator (SSCG) chips for EMI reduction ? We use a C6713 that gets...

All, Has anyone else come across problems using spread spectrum clock generator (SSCG) chips for EMI reduction ? We use a C6713 that gets its clock from a Cypress CY25811 SSCG that is used for EMI reduction. The problem is that our code crashes after 2-40 hours with the SSCG in place. If we disable the spread spectrum feature of the same chip everything seems to run fine. Are there an...

Hi, i have a question about controlling AIC23 through McBSP on C6713 DSK. AIC23 is interfaced with 2 McBSP, one for control and another for...

Hi, i have a question about controlling AIC23 through McBSP on C6713 DSK. AIC23 is interfaced with 2 McBSP, one for control and another for data flow. To use the AIC23, I have to initialize the AIC23 first by writing AIC23 config structure to McBSP port 0, then we can start data transfer through McBSP port 1. In my work, I am trying to modify the ti example dsk_app.pjt. I want the dsk beh...

Hi all, I'm Khoa, now I'm using Code Composer Studio v3.1 and C6713 board. When I used RTDX to transfer data from PC host (MSVC++) to C6713...

Hi all, I'm Khoa, now I'm using Code Composer Studio v3.1 and C6713 board. When I used RTDX to transfer data from PC host (MSVC++) to C6713 board, I met this problem : PC host - MSVC++ : I used this command to write data : rtdx->WriteI1( Data_To_Send, &bufferstate ) but when I write 1025th byte, the WriteI1 command cann't continuously write (Failed result was re

Hello, I loss Digital Signal Processing's CD And Applications with the C6713 and C6416 DSK and I want to know if some can help me to get...

Hello, I loss Digital Signal Processing's CD And Applications with the C6713 and C6416 DSK and I want to know if some can help me to get this CD, From where I can reduce it? or Where I get it? THANKS