Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version...

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if any one knows where to get this file or someone has this file plea...

Hello Everybody, We have the new EVMDM648 and are trying to connect the JTAG to it. When we try in SDConfig then we get the following...

Hello Everybody, We have the new EVMDM648 and are trying to connect the JTAG to it. When we try in SDConfig then we get the following messages ** Emulator Test ** $$ EmuProductName=XDS510PP_PLUS $$ EmuPortAddr=0x378 $$ EmuPortMode=SPP8 $$ ProductId=10 $$ ProductVersion=02 ** Emulator Scan Test -- Found JTAG IR length of 6 -- Found 1 JTAG device(s...

Hi Damien, I have the exact same issue/problem as the one you describe below. I wish to use my XDS510PP-plus JTAG emulator on a PC that has no...

Hi Damien, I have the exact same issue/problem as the one you describe below. I wish to use my XDS510PP-plus JTAG emulator on a PC that has no parallel port. Therefore I am curious to know if you managed to find a way how to do that. Best regards, Christian Dear DSP experts, > > We own a XDS510PP PLUS JTAG emulator, which works on a parallel port. > We would like to use it with a laptop,

Hi ,I meet a problem on connecting my jtag to DSP. There are some steps bellow: 1. chain scan is ok. a target can be found. 2. reset the...

Hi ,I meet a problem on connecting my jtag to DSP. There are some steps bellow: 1. chain scan is ok. a target can be found. 2. reset the emulator 3. execuse the ccs3.1,then the system gives messages : < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < Can't Initialize target CPU; Error 0x80000200/-1070 Fatal Error during:OCS, An unknown errror prevented the emulator from accessing the processo

Hi Im chandrasekha from BEL, Chennai, India. We developed TMSS320C6727 DSP Custom board. We installed CCS 3.3 and latest spectrum...

Hi Im chandrasekha from BEL, Chennai, India. We developed TMSS320C6727 DSP Custom board. We installed CCS 3.3 and latest spectrum digital emulator drivers in PC. First time tried to connect the board with CCS3.3 through XDS 510 USB emulator but could not succeeded to establish the connection. The error we are facing is " Error Connecting to Target Bad Target Silicon Revision ...

I bought a Lyrtech PADK and have some question I cannot get answered. Lyrtech's documentation does not say. Can I single-step (debug) my code...

I bought a Lyrtech PADK and have some question I cannot get answered. Lyrtech's documentation does not say. Can I single-step (debug) my code from within the CCStudio via the USB? If yes, how do I do that? Or DO I need to spend another $1500 for a JTAG emulator. (I also have a $500 board with a 6713, which got a JTAG emulator onboard.) To be sure, the board does runs the demo programs ...

Ivan, I use some different emulators, but not Spectrum Digital. see comments below. On Thu, Jul 10, 2008 at 8:08 AM, Ivan wrote: > ...

Ivan, I use some different emulators, but not Spectrum Digital. see comments below. On Thu, Jul 10, 2008 at 8:08 AM, Ivan wrote: > Hi Mike, > > I would like to ask something that has bothered me for a while and > has been hindering me from progressing my project. > > Previously, when I used the Code Composer Studio v 3.1 I could use > the USB jtag emulator built

If you are not writing or reading external memory before releasing the DSP, then you can let the DSP set the EMIF. We find that the program...

If you are not writing or reading external memory before releasing the DSP, then you can let the DSP set the EMIF. We find that the program doesn't run after setting DSPINT if the emulator is connected. Sometimes if the emulator is connected the HPI writes do not happen correctly, either. > > > > hello everyone ? > > I have following queries ?regarding the hpi >

Hi everybody, I'm a newbye in DSP development. I just buyed a XDS510 USB 2.0 "manufactured" by YUHUA Electronics from an ebay Honk...

Hi everybody, I'm a newbye in DSP development. I just buyed a XDS510 USB 2.0 "manufactured" by YUHUA Electronics from an ebay Honk Kong reseller. Furnished windows drivers are from "SEED International" and seems to be installed correctly. But the Emulator Reset Utility can't reset the device, signaling me "SEED USB2.0 XDS510 CARD RESET FAILED, ffff". Repeating the reset command while the emu...

Update #1. Emulator seems to connect to the "brand new" board insted the old "tested" one ... bah. The old is not very reliable! The strange...

Update #1. Emulator seems to connect to the "brand new" board insted the old "tested" one ... bah. The old is not very reliable! The strange thing is that it is very slow in accessing registry or memory contents. If I click on a rigister set I immeditely see all values at "?????????" and after some seconds real (?) values appears. Load a program is not possible due to verification errors. An...

I'm new to DSP and am interested in two different DSK / EVMs from TI but don't know if I also need an emulator with these or if they come with it...

I'm new to DSP and am interested in two different DSK / EVMs from TI but don't know if I also need an emulator with these or if they come with it "onboard". The first one is the TMS320C6455 DSP Starter Kit: According to TI docs it has "Embedded XDS510-class JTAG support via USB" The other one is the new TMS320C6474 Evaluation Module which has "Onboard JTAG emulation plus a XDS560T (Trace Po...

I am using TMS320c6713B custom board along with Spectrum Digital EMulator xds510usb. While Connecting with my custom board using sdconfig utility...

I am using TMS320c6713B custom board along with Spectrum Digital EMulator xds510usb. While Connecting with my custom board using sdconfig utility I got ok results. It can scan pattern and verfiy patterns also . However when i start CCS studio i found a message " An unknown error prevented the Emulator in a timely fashion. " I have checked with Reset also . It seems fine too. I am using TPS70345 a...

Bob- > Thank for your help again. We are still struggling to find the solution. > Here the answer to your question/comments. > > 1) Did...

Bob- > Thank for your help again. We are still struggling to find the solution. > Here the answer to your question/comments. > > 1) Did you check your known-good Win2k system and see if someone had > run SDConfig before? > (A1) I checked all the Emulator settings on the Windows 2000 PC and > made sure that the PC running Windows XP is set the same. Ok. > 2) Did you try running xdsp

In a new design with C6713, connecting to CCS is successful, Oscillator and capacitors, some required resistor and EMI filter and buffer of...

In a new design with C6713, connecting to CCS is successful, Oscillator and capacitors, some required resistor and EMI filter and buffer of emulator assembled on board due to test and debug be easier. No external flash or SDRAM assembled and emulator is xds560. during a simple program, when loading .cinit to 0x2960 one error occurred:? data verification failed at 0x2960 please verify targ

Hi All, Our board(Product) has TCI6488 processor. We have a blackhawk JTAG emulator. we have installed the CCS V3.3 with SR12 patch and...

Hi All, Our board(Product) has TCI6488 processor. We have a blackhawk JTAG emulator. we have installed the CCS V3.3 with SR12 patch and installed the JTAG driver. While we are trying to open the emulator debugger and tried to connect to the target it shows the below error message. Error connecting to the target: Error 0x80002240/-183 Fatal Error during: Initialization, OCS, Control, Thi...

Hello all, I hv a Lyrtech DM648EVM which has on board MSP430 with a JTAG support for programming. I hv recently purchased TI...

Hello all, I hv a Lyrtech DM648EVM which has on board MSP430 with a JTAG support for programming. I hv recently purchased TI MSP-FET430UIF (USB) programmer for it with the IAR kick start(EWB). The problem is, on board MSP430 controller is not recognised by Emulator although I have followed all the instructions. Is there any other HW/SW needed (in addition to one I hv)to Program on...

Hello friends, I wanted to connect Wintech TDS510USBPLUS emulator with our custom board TMS320C6416 dsp.I use Code Composer 3.3 Platinum...

Hello friends, I wanted to connect Wintech TDS510USBPLUS emulator with our custom board TMS320C6416 dsp.I use Code Composer 3.3 Platinum version.But i could not able to connect it. if anybody have known abt this,please reply. -indu _____________________________________

Michael, I'm not so thin skinned as to be insulted. I just wrote the fact, I do not know anything about the two emulators being discussed. I...

Michael, I'm not so thin skinned as to be insulted. I just wrote the fact, I do not know anything about the two emulators being discussed. I was originally referring to my experience with other emulators and what a failure to connect usually meant, (after the appropriate emulator drivers had been loaded to CCS). SO no problem at all. R. Williams ---------- Original Message ----------...

Hi All, We are experiencing one major problem when using C3x/C4x Code Composer 4.10 and the Spectrum Digital SPI530 MPSD Emulator on PCs running...

Hi All, We are experiencing one major problem when using C3x/C4x Code Composer 4.10 and the Spectrum Digital SPI530 MPSD Emulator on PCs running Windows XP. We have always run under Windows 2000 and never experienced the following error. While we can successfully connect to a target C30 DSP, reset the DSP, view DSP memory and internal registers, modify memory locations and load symbols, we c...

Hi Has anyone ever used the TMS320C6745? I can´t configure it? I open the Code Composer Studio Setup and create a board, i choose...

Hi Has anyone ever used the TMS320C6745? I can´t configure it? I open the Code Composer Studio Setup and create a board, i choose the SD510USB Emulator (I´m working with the XDS510 USB PLUS Emulator)and i also choose the processor type c6745 which includes an ICEPICK_C and the TMS320C674XP. When the setup is finished i save and quit and the Code Composer Studio starts. The problem comes ...