I'm new to DSP and am interested in two different DSK / EVMs from TI but don't know if I also need an emulator with these or if they come with it...

I'm new to DSP and am interested in two different DSK / EVMs from TI but don't know if I also need an emulator with these or if they come with it "onboard". The first one is the TMS320C6455 DSP Starter Kit: According to TI docs it has "Embedded XDS510-class JTAG support via USB" The other one is the new TMS320C6474 Evaluation Module which has "Onboard JTAG emulation plus a XDS560T (Trace Po...

Miguel- > Hello, I was looking for some information about emulators and i found > this thread. Just one simply question: what is a SEED USB...

Miguel- > Hello, I was looking for some information about emulators and i found > this thread. Just one simply question: what is a SEED USB emulator? http://www.seeddsp.com/default.php#2 -Jeff > > Sorry about the top posting. I only have 'very low tech' access at the moment and this is just a pasted text file. > > > > I will try to make this generic for 'cannot connect problems wit

I bought a Lyrtech PADK and have some question I cannot get answered. Lyrtech's documentation does not say. Can I single-step (debug) my code...

I bought a Lyrtech PADK and have some question I cannot get answered. Lyrtech's documentation does not say. Can I single-step (debug) my code from within the CCStudio via the USB? If yes, how do I do that? Or DO I need to spend another $1500 for a JTAG emulator. (I also have a $500 board with a 6713, which got a JTAG emulator onboard.) To be sure, the board does runs the demo programs ...

Hello everybody. I'm trying to use XDS510PP Jtag emulator with a DM642 EVM. It doesn't work, and the utility sdconfig when I try to reset the...

Hello everybody. I'm trying to use XDS510PP Jtag emulator with a DM642 EVM. It doesn't work, and the utility sdconfig when I try to reset the emulator give me the "Invalid port configuration" signal. The output of Configuration-> port available give me $$ Printer port available at: $$ EmuPortAddr=0x378 $$ EmuPortMode=SPP8 $$ EmuPortSpeed=0 The sdopt.cfg file contains: # ============

Hi ,I meet a problem on connecting my jtag to DSP. There are some steps bellow: 1. chain scan is ok. a target can be found. 2. reset the...

Hi ,I meet a problem on connecting my jtag to DSP. There are some steps bellow: 1. chain scan is ok. a target can be found. 2. reset the emulator 3. execuse the ccs3.1,then the system gives messages : < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < Can't Initialize target CPU; Error 0x80000200/-1070 Fatal Error during:OCS, An unknown errror prevented the emulator from accessing the processo

Hi Damien, I have the exact same issue/problem as the one you describe below. I wish to use my XDS510PP-plus JTAG emulator on a PC that has no...

Hi Damien, I have the exact same issue/problem as the one you describe below. I wish to use my XDS510PP-plus JTAG emulator on a PC that has no parallel port. Therefore I am curious to know if you managed to find a way how to do that. Best regards, Christian Dear DSP experts, > > We own a XDS510PP PLUS JTAG emulator, which works on a parallel port. > We would like to use it with a laptop,

Hi, The confidence test on my C6x EVM board fails giving the error as "NVRAM checksum failed". The TI Knowledgebase says this...

Hi, The confidence test on my C6x EVM board fails giving the error as "NVRAM checksum failed". The TI Knowledgebase says this is a known error and they have a patch for it; but, it requires an emulator (XDS510). Our EVM does not have this emulator. Has a

Hello Mike, > > we are usin the XDS510PP_plus Parallel port interfacing.Previously it is working fine but, recently I am getting the...

Hello Mike, > > we are usin the XDS510PP_plus Parallel port interfacing.Previously it is working fine but, recently I am getting the following problem. > > Can't Initialize Target CPU: > Error 0x00001200/-1145 > Error during OCS, Target, > Unrecoverable emulation error > > Board Name: F2812PP Emulator via parallel Emulator - Cpu Name:CPU_1 > > --------------------------------- > M.viswe

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version...

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if any one knows where to get this file or someone has this file plea...

Hi Im chandrasekha from BEL, Chennai, India. We developed TMSS320C6727 DSP Custom board. We installed CCS 3.3 and latest spectrum...

Hi Im chandrasekha from BEL, Chennai, India. We developed TMSS320C6727 DSP Custom board. We installed CCS 3.3 and latest spectrum digital emulator drivers in PC. First time tried to connect the board with CCS3.3 through XDS 510 USB emulator but could not succeeded to establish the connection. The error we are facing is " Error Connecting to Target Bad Target Silicon Revision ...

Hi to all, I am going to post a question that may sound stupid, but I haven't been able to find out the answer. I have...

Hi to all, I am going to post a question that may sound stupid, but I haven't been able to find out the answer. I have configured correctly my dsk6713 and it works. I also have an XDS560 POD that is correctly connected to the PC. The question is: Is always necessary that the POD cable is connected to the DSK by the JTAG port?? Can the emulator works without this conection...

Hello, has anyone experience with a USB2.0 Port Replicator connected to XDS510pp plus emulator(parallel port)? Does it...

Hello, has anyone experience with a USB2.0 Port Replicator connected to XDS510pp plus emulator(parallel port)? Does it works? I would like buy a notebook without parallel port. Thanks, Milan

hi i have a 6201 BGA device connected wih lot of problems to the pcb.now i want to check if all of its pins  realy connected or...

hi i have a 6201 BGA device connected wih lot of problems to the pcb.now i want to check if all of its pins  realy connected or not, i have an XDS510 jtag emulator and i heard that it is possible to check the pins with that, do i need a special soft ware or code composer can do it for me?

Cerdar Chen- -open SDConfig icon on desktop -open correct LPT port I/O address -double-click on Emu A properties...

Cerdar Chen- -open SDConfig icon on desktop -open correct LPT port I/O address -double-click on Emu A properties dialog should open and you should see a box marked "Emulator Port Speed". But again, I think this is a host softwa

Hi All, We have designed a custom board with TMS320C6414T processor on board. We are using a JTAG emulator from GAO Tech Canada, for...

Hi All, We have designed a custom board with TMS320C6414T processor on board. We are using a JTAG emulator from GAO Tech Canada, for programimg the processor. The JTAG emulator does not connect to the processor, and gives the following error. ------------------------------------------------------------------------------- Error connecting to the target: Error 0x80000240/-121 Fatal Err...

Tahir, On 10/19/07, Tahir Mehmood wrote: > > Dear All, > I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error...

Tahir, On 10/19/07, Tahir Mehmood wrote: > > Dear All, > I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if a

recently I happened to made a C 6416 PCB board myself.and I bought seed-XDSUSB2.0 emulator to connect to my PCB board to start ...

recently I happened to made a C 6416 PCB board myself.and I bought seed-XDSUSB2.0 emulator to connect to my PCB board to start emulations.but unfortunatelty ,when I start CCS,the emulator cannot connect to the CPU on the board after I had installed all the software and drivers neces

hai i am using c6211 emulator. i have written a program in ASM to initialize EDMA loading data in control registe(EER,ESR) but ,...

hai i am using c6211 emulator. i have written a program in ASM to initialize EDMA loading data in control registe(EER,ESR) but , sometimes it display error while loading : Device driver error: emulator not recomandeng target dsp and/or control register are not load

Hi All!    i have a query , Can i download the code on target Board  with out using the Emulator , is it through Serial port then which...

Hi All!    i have a query , Can i download the code on target Board  with out using the Emulator , is it through Serial port then which Driver Software will be needed for it? thanx in advance swapnali   How much free photo storage do you get? Store your friends n family photos for FREE with Yaho

JTAG emulator enables high-speed RTDX? data link at more than two megabytes per second and code download speeds at up to half a ...

JTAG emulator enables high-speed RTDX? data link at more than two megabytes per second and code download speeds at up to half a megabyte per second For more info: http://www.dspvillage.ti.com/emulator8 HOUSTON