All- I'm posting this question here, the global knowledge source for TI JTAG related issues :-) I have a batch of C5510A modules that are...

All- I'm posting this question here, the global knowledge source for TI JTAG related issues :-) I have a batch of C5510A modules that are showing inconsistent JTAG scan test results. Out of 6, 3 are passing, two with buffered TCK and RTCK, and 1 without (without = bypass the buffer using zero-ohm Rs). The failing modules also are configured both ways. Due to this variation, I'm concerned...

Do u know the different means of downloading any program into flash? (I know that Flashburn can be used. But, I think that I need a JTAG...

Do u know the different means of downloading any program into flash? (I know that Flashburn can be used. But, I think that I need a JTAG emulator to connect my flash to the PC. But how do we do it? How do I know how to make use of this JTAG with my flash IC? My DSP kit is 6713B kit. And the PCB is ready. But now, we have to get the components soldered first. And is it possible to make use...

I'm new to DSP and am interested in two different DSK / EVMs from TI but don't know if I also need an emulator with these or if they come with it...

I'm new to DSP and am interested in two different DSK / EVMs from TI but don't know if I also need an emulator with these or if they come with it "onboard". The first one is the TMS320C6455 DSP Starter Kit: According to TI docs it has "Embedded XDS510-class JTAG support via USB" The other one is the new TMS320C6474 Evaluation Module which has "Onboard JTAG emulation plus a XDS560T (Trace Po...

Hi All, We have designed a custom board with TMS320C6414T processor on board. We are using a JTAG emulator from GAO Tech Canada, for...

Hi All, We have designed a custom board with TMS320C6414T processor on board. We are using a JTAG emulator from GAO Tech Canada, for programimg the processor. The JTAG emulator does not connect to the processor, and gives the following error. ------------------------------------------------------------------------------- Error connecting to the target: Error 0x80000240/-121 Fatal Err...

Hi, I've spectrum digital's XDS560 emulators, that I use for 6416 DSPs. As we know, JTAG is a IEEE standard(IEEE1149.1)....

Hi, I've spectrum digital's XDS560 emulators, that I use for 6416 DSPs. As we know, JTAG is a IEEE standard(IEEE1149.1). Then, why we can't use the same emulator with IDEs of different vendors for different processors? Thanks and Regards, Veeresh

Hello, We were trying to run a code in Code Composer Studio from and the code runs fine for some time but then suddenly JTAG disconnects...

Hello, We were trying to run a code in Code Composer Studio from and the code runs fine for some time but then suddenly JTAG disconnects saying SC_ERR_HUNG_RDBUFFER Failure due to the controller buffer reads are taking too long. but at the same time we see the code running fine as we dont see any interruption on the video output. Any idea what could be the reason for JTAG di

Tahir, On 10/19/07, Tahir Mehmood wrote: > > Dear All, > I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error...

Tahir, On 10/19/07, Tahir Mehmood wrote: > > Dear All, > I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if a

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version...

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if any one knows where to get this file or someone has this file plea...

Anyone have any tips on production testing techniques for pc boards using the C64xx BGA chip? i.e. is Xray inspection of the BGA contacts...

Anyone have any tips on production testing techniques for pc boards using the C64xx BGA chip? i.e. is Xray inspection of the BGA contacts standard? Are there test programs using JTAG that can check for opens/shorts and do external memory bus testing? Has anyone gotten advice from TI in doing design-for-test with the C64xx that they could share? Thanks!

Dear all Let me to explain my problem. I want to use JTAG for connect target (C6713 board not C6713DSK) and emulator. I have a big program and I...

Dear all Let me to explain my problem. I want to use JTAG for connect target (C6713 board not C6713DSK) and emulator. I have a big program and I want to save total of program on flash, then by secondary boot loader copy them to IRAM on DSP for running. How can I program flash? Is Gel file programmed on flash? Is it possible to program flash on board by DSP? For have a secondary boot loading, ...

Hi Mike, We are using DM640-based custom boards with XDS510 PP Emulator. During production, some of our boards do not seem to connect...

Hi Mike, We are using DM640-based custom boards with XDS510 PP Emulator. During production, some of our boards do not seem to connect with CCS while some of them do. We have checked the hardware connections and JTAG signals of these boards with those that are working and they seem similar. We tested the boards using SDConfig utility and it is able to detect scan path and is able t...

Hi ,I meet a problem on connecting my jtag to DSP. There are some steps bellow: 1. chain scan is ok. a target can be found. 2. reset the...

Hi ,I meet a problem on connecting my jtag to DSP. There are some steps bellow: 1. chain scan is ok. a target can be found. 2. reset the emulator 3. execuse the ccs3.1,then the system gives messages : < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < Can't Initialize target CPU; Error 0x80000200/-1070 Fatal Error during:OCS, An unknown errror prevented the emulator from accessing the processo

Hi, I need to connect the Boundary Scan Register between TDI and TDO. Does anybody know where to find the binary codes of the JTAG...

Hi, I need to connect the Boundary Scan Register between TDI and TDO. Does anybody know where to find the binary codes of the JTAG instructions PRELOAD, SAMPLE and EXTEST, and the way of using them to scan serial data to access the external flash of the chip? Thank you, Ivan

Hi, I face an issue while connecting xds560 PCI JTAG emulator to DM642 EVM. I've the xds560 emulator inserted in the PCI slot of the PC and...

Hi, I face an issue while connecting xds560 PCI JTAG emulator to DM642 EVM. I've the xds560 emulator inserted in the PCI slot of the PC and installed the driver for it. When I run the diagnostics of the xds560 emulator, all the tests in the diagnostics gets passed without any issue. In the CCS setup, I configured the DM642XDSEMULATOR option and tried opening the CCS. But I get an ERROR mention...

I bought a Lyrtech PADK and have some question I cannot get answered. Lyrtech's documentation does not say. Can I single-step (debug) my code...

I bought a Lyrtech PADK and have some question I cannot get answered. Lyrtech's documentation does not say. Can I single-step (debug) my code from within the CCStudio via the USB? If yes, how do I do that? Or DO I need to spend another $1500 for a JTAG emulator. (I also have a $500 board with a 6713, which got a JTAG emulator onboard.) To be sure, the board does runs the demo programs ...

k.rathnasabapathy, Several different people have reported mysterious problems when using the TMS320C6727B-Wintech TDS510USB Emulator...

k.rathnasabapathy, Several different people have reported mysterious problems when using the TMS320C6727B-Wintech TDS510USB Emulator configuration. 6711 and 6713 devices work okay with the Wintech TDS510USB Emulator. IMO, The problem appears to be rooted in the software for the Wintech TDS510USB Emulator. The 6727 device has the longest JTAG scan chain of any C6000 device [and most lik...

Hello, I'm new to davinci.... I've got the evaluation board DVEVM(DM6446). All the board configurations and driver support is installed in...

Hello, I'm new to davinci.... I've got the evaluation board DVEVM(DM6446). All the board configurations and driver support is installed in host machine(linux) So plz help me to port a small code in the board... I'm missing an adapter(14to 20pin) for JTAG.so is that possible to port code without JTAG via network?? Thanks in advance Priya....... _________________________________...

Hello, I've problem connecting the target via CCS 3.3 . I use JTAG adapter to connect to target in which I set the switches to default...

Hello, I've problem connecting the target via CCS 3.3 . I use JTAG adapter to connect to target in which I set the switches to default state(ie. All OFF state) It give the following error: Error connecting to the target: Error 0x80000240/-180 Fatal Error during: Initialization, OCS, This error was generated by TI's USCIF driver. SC_ERR_CTL_NO_TRG_POWER The con

Hello, I've problem connecting the target via CCS 3.3 . I use JTAG adapter to connect to target in which I set the switches to default...

Hello, I've problem connecting the target via CCS 3.3 . I use JTAG adapter to connect to target in which I set the switches to default state(ie. All OFF state) It give the following error: Error connecting to the target: Error 0x80000240/-180 Fatal Error during: Initialization, OCS, This error was generated by TI's USCIF driver. SC_ERR_CTL_NO_TRG_POWER The contro

HI, I am using tms320c642x dsp on my baord and when power on reset it is said that device configuaration pins are latched into boot...

HI, I am using tms320c642x dsp on my baord and when power on reset it is said that device configuaration pins are latched into boot configuaration register. Initially(when power on reset) i am selecting no boot mode (emulation mode), so dsp goes into wait state. I want to read the code through JTAG into the dsp and write that code into FLASH. My code is a C-code. How to read that code trough JTAG...