DSPRelated.com

Re: [c55x] CC and JTAG with other devices in the scan chain

Started by Jeff Brower in TMS320c6x20 years ago 4 replies

Gagan- > I guess better put the TI device as first > CPU in the boundary scan chain. This might help. I > only run homogenous...

Gagan- > I guess better put the TI device as first > CPU in the boundary scan chain. This might help. I > only run homogenous mix of 8 TI DSPs in single chain. > But havn't try on the hetrogenous mix of other CPUs > Other thing is to slow the JTAG clock fr


ERROR >> JTAG IR scan test failed

Started by must...@gmail.com in TMS320c6x17 years ago 2 replies

Hello Everyone I have a problem about reflashing my device, I was trying to write a flash driver sw for our hw platform. I have erased the...

Hello Everyone I have a problem about reflashing my device, I was trying to write a flash driver sw for our hw platform. I have erased the contents of the flash(bootloader) and I was not able to reflash it again using JTAG emulation or whatsoever. SD config output is like this : ** Emulator Test ** $$ EmuProductName=XDS510USB $$ EmuPortAddr=0x510 $$ EmuPortMode=USB $$ ProductId=510...


JTAG issues.. Please help Mike

Started by "Kalaivani.S" in TMS320c6x15 years ago 14 replies

Hi Mike, We are using DM640-based custom boards with XDS510 PP Emulator. During production, some of our boards do not seem to connect...

Hi Mike, We are using DM640-based custom boards with XDS510 PP Emulator. During production, some of our boards do not seem to connect with CCS while some of them do. We have checked the hardware connections and JTAG signals of these boards with those that are working and they seem similar. We tested the boards using SDConfig utility and it is able to detect scan path and is able t...


Production programming Flash with jtag

Started by Steve Thornhill in TMS320c6x21 years ago 5 replies

Hi, I need to set up a PC to program the flash on a custom 6711 board using a JTAG emulator. FlashBurn appears to require CCS...

Hi, I need to set up a PC to program the flash on a custom 6711 board using a JTAG emulator. FlashBurn appears to require CCS 2.1 I really don't want to give our production department a full version of CCS. Is there anyway to use FlashBurn without CCS or does TI have a standal


problem connecting to DM640 board using CCS

Started by AK in TMS320c6x17 years ago 3 replies

Hello experts, I am listing below a problem that I am stuck with for 4-5 days now. Could you please go through it and give suggestions or lead...

Hello experts, I am listing below a problem that I am stuck with for 4-5 days now. Could you please go through it and give suggestions or lead me to someone in your contact list who might have experience in related issues? Our target board is based on the DM640 and we have designed its JTAG circuitry exactly as in the DM642 EVM. We are using the 14- pin JTAG connector connected to a XDS5...


problem connecting to DM640 board using CCS

Started by AK in TMS320c6x17 years ago 1 reply

Hello experts, I am listing below a problem that I am stuck with for 4-5 days now. Could you please go through it and give suggestions or lead...

Hello experts, I am listing below a problem that I am stuck with for 4-5 days now. Could you please go through it and give suggestions or lead me to someone in your contact list who might have experience in related issues? Our target board is based on the DM640 and we have designed its JTAG circuitry exactly as in the DM642 EVM. We are using the 14- pin JTAG connector connected to a XDS5...


Debugging four TMS320C6201

Started by Thomas Schwere in TMS320c6x23 years ago 3 replies

Hi all We developped a board with four C6201 in the JTAG chain and want to debug them with the XDS510 Emulator and Code...

Hi all We developped a board with four C6201 in the JTAG chain and want to debug them with the XDS510 Emulator and Code Composer Studio Debug Tools 1.20. The DSPs are the only devices in the JTAG chain. The Emulator is connected as in the TI application note SPRA439, figure 5


TMS470 Jtag

Started by iddq...@gmail.com in TMS320c6x14 years ago 7 replies

Greeting Has anyone ever used the TI TMS470 chip with the XDS510 and CCS?? I connect my XDS510 to the TI TMS470. In CCS the emulator connects...

Greeting Has anyone ever used the TI TMS470 chip with the XDS510 and CCS?? I connect my XDS510 to the TI TMS470. In CCS the emulator connects to the target board but I can't read any memory address at all. I am not sure if I connect the Jtag in the right way (I connected it as I connect to the TMS320C6722), Does anyone have a schematic or can give me a hand on this issue? Thanks in advance. ...


BGA and jtag emulator

Started by Yasser Attarizzi in TMS320c6x19 years ago 1 reply

hi i have a 6201 BGA device connected wih lot of problems to the pcb.now i want to check if all of its pins  realy connected or...

hi i have a 6201 BGA device connected wih lot of problems to the pcb.now i want to check if all of its pins  realy connected or not, i have an XDS510 jtag emulator and i heard that it is possible to check the pins with that, do i need a special soft ware or code composer can do it for me?


(unknown)

Started by ketan deshpande in TMS320c6x16 years ago 1 reply

Hello, We were trying to run a code in Code Composer Studio from and the code runs fine for some time but then suddenly JTAG disconnects...

Hello, We were trying to run a code in Code Composer Studio from and the code runs fine for some time but then suddenly JTAG disconnects saying SC_ERR_HUNG_RDBUFFER Failure due to the controller buffer reads are taking too long. but at the same time we see the code running fine as we dont see any interruption on the video output. Any idea what could be the reason for JTAG di


Lyrtech PADK

Started by danielaqwe in TMS320c6x15 years ago 10 replies

I bought a Lyrtech PADK and have some question I cannot get answered. Lyrtech's documentation does not say. Can I single-step (debug) my code...

I bought a Lyrtech PADK and have some question I cannot get answered. Lyrtech's documentation does not say. Can I single-step (debug) my code from within the CCStudio via the USB? If yes, how do I do that? Or DO I need to spend another $1500 for a JTAG emulator. (I also have a $500 board with a 6713, which got a JTAG emulator onboard.) To be sure, the board does runs the demo programs ...


JTAG problem

Started by bigbibby2002 in TMS320c6x15 years ago 1 reply

Hi ,I meet a problem on connecting my jtag to DSP. There are some steps bellow: 1. chain scan is ok. a target can be found. 2. reset the...

Hi ,I meet a problem on connecting my jtag to DSP. There are some steps bellow: 1. chain scan is ok. a target can be found. 2. reset the emulator 3. execuse the ccs3.1,then the system gives messages : < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < Can't Initialize target CPU; Error 0x80000200/-1070 Fatal Error during:OCS, An unknown errror prevented the emulator from accessing the processo


Jtag Issues regarding the bringing upo of the C6x customized board!

Started by Saqib Ali in TMS320c6x19 years ago

Hi In bringing up a dsp TI320C6201 board with 32 MByte SDRAM MT48LC4M16A2(8 MByte each) on board I am facing some problems. ...

Hi In bringing up a dsp TI320C6201 board with 32 MByte SDRAM MT48LC4M16A2(8 MByte each) on board I am facing some problems. First of all when I power up the board I used spectrum digital XDS510PP to dump my code on chip through Jtag. I used internal memory map BOO


Spectrum Digital XDS510 USB JTAG Emulator

Started by jigs_dsp in TMS320c6x17 years ago

Hi C6x DSP group, I am looking for Spectrum Digital XDS510 USB JTAG Emulator (Used). Please let me know where can I get used emulator. I...

Hi C6x DSP group, I am looking for Spectrum Digital XDS510 USB JTAG Emulator (Used). Please let me know where can I get used emulator. I searched eBay, but could not find it. If anyone is planning to sell it at low price, then please let me know. Thanks and Regards, jigs_dsp India.


c6202 booting problem

Started by haipani in TMS320c6x21 years ago

HAI GUYS IAM USING C6202 AND CCS1.2 FOR MY APPLICATION. I FLASHED MY APPLICATION, IT WLL BOOT WELL AND WORKS FINE WHEN U...

HAI GUYS IAM USING C6202 AND CCS1.2 FOR MY APPLICATION. I FLASHED MY APPLICATION, IT WLL BOOT WELL AND WORKS FINE WHEN U CONNECT JTAG AND RUN, IF U REMOVE JTAG AND RESET THE BOARD IT WON'T WORK. THERE IS NO PROBLEM IN RESET AND BOOTING PROCEDURE........ , any idea?


Are there any problems with a JTAG connector and EMIF registers?

Started by Albert Tsai in TMS320c6x21 years ago

I am using a JTAG connector to program the C6711BGFN DSP chip situated as a module on the PC-104 data acquisition board our company ...

I am using a JTAG connector to program the C6711BGFN DSP chip situated as a module on the PC-104 data acquisition board our company developed. When I step through a program using TI Code Composer, the program hangs whenever the EMIF registers are accessed. Is this problem


Device driver needed for xds560 JTAG Emulator

Started by Tahir Mehmood in TMS320c6x16 years ago

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version...

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if any one knows where to get this file or someone has this file plea...


low cost emulator for DaVinci

Started by jigs_dsp in TMS320c6x17 years ago 2 replies

Which one is low cost JTAG emulator for TI DaVinci DM6446? Spectrum Digital XDS510 USB seems to be very good choice, but quite expensive. If...

Which one is low cost JTAG emulator for TI DaVinci DM6446? Spectrum Digital XDS510 USB seems to be very good choice, but quite expensive. If someone is planning to sell any JTAG emulator (used) which can work with DaVinci DM6446, please let me know. Thanks and Regards, jigs_dsp


Re: Device driver needed for xds560 JTAG Emulator

Started by Michael Dunn in TMS320c6x16 years ago

Tahir, On 10/19/07, Tahir Mehmood wrote: > > Dear All, > I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error...

Tahir, On 10/19/07, Tahir Mehmood wrote: > > Dear All, > I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if a


CC and JTAG with other devices in the scan chain

Started by Arius - Rick Collins in TMS320c6x20 years ago 3 replies

The JTAG port is used both for debugging software in development and for boundary scan hardware test in production. Most of the PLD...

The JTAG port is used both for debugging software in development and for boundary scan hardware test in production. Most of the PLD vendors provide support in their programming software for other devices in the scan chain. But I have received mixed advice on putting TI DSPs in a scan chain