Dear all Let me to explain my problem. I want to use JTAG for connect target (C6713 board not C6713DSK) and emulator. I have a big program and I...

Dear all Let me to explain my problem. I want to use JTAG for connect target (C6713 board not C6713DSK) and emulator. I have a big program and I want to save total of program on flash, then by secondary boot loader copy them to IRAM on DSP for running. How can I program flash? Is Gel file programmed on flash? Is it possible to program flash on board by DSP? For have a secondary boot loading, ...

Anyone have any tips on production testing techniques for pc boards using the C64xx BGA chip? i.e. is Xray inspection of the BGA contacts...

Anyone have any tips on production testing techniques for pc boards using the C64xx BGA chip? i.e. is Xray inspection of the BGA contacts standard? Are there test programs using JTAG that can check for opens/shorts and do external memory bus testing? Has anyone gotten advice from TI in doing design-for-test with the C64xx that they could share? Thanks!

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version...

Dear All, I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if any one knows where to get this file or someone has this file plea...

Tahir, On 10/19/07, Tahir Mehmood wrote: > > Dear All, > I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error...

Tahir, On 10/19/07, Tahir Mehmood wrote: > > Dear All, > I am currently working on Black Hawk XDS 560 JTAG Emulator. I recieve error messages while setting up Code Composer Studio (Version 2.2 or 3.1 ) that the device driver file (tixds560c6x.dvr )does not exist. I have tried to find it out on blackhawk website and ti.com but there is no such file available there.Please if a

Hello, We were trying to run a code in Code Composer Studio from and the code runs fine for some time but then suddenly JTAG disconnects...

Hello, We were trying to run a code in Code Composer Studio from and the code runs fine for some time but then suddenly JTAG disconnects saying SC_ERR_HUNG_RDBUFFER Failure due to the controller buffer reads are taking too long. but at the same time we see the code running fine as we dont see any interruption on the video output. Any idea what could be the reason for JTAG di

Hi, I've spectrum digital's XDS560 emulators, that I use for 6416 DSPs. As we know, JTAG is a IEEE standard(IEEE1149.1)....

Hi, I've spectrum digital's XDS560 emulators, that I use for 6416 DSPs. As we know, JTAG is a IEEE standard(IEEE1149.1). Then, why we can't use the same emulator with IDEs of different vendors for different processors? Thanks and Regards, Veeresh

Hi All, We have designed a custom board with TMS320C6414T processor on board. We are using a JTAG emulator from GAO Tech Canada, for...

Hi All, We have designed a custom board with TMS320C6414T processor on board. We are using a JTAG emulator from GAO Tech Canada, for programimg the processor. The JTAG emulator does not connect to the processor, and gives the following error. ------------------------------------------------------------------------------- Error connecting to the target: Error 0x80000240/-121 Fatal Err...

Do u know the different means of downloading any program into flash? (I know that Flashburn can be used. But, I think that I need a JTAG...

Do u know the different means of downloading any program into flash? (I know that Flashburn can be used. But, I think that I need a JTAG emulator to connect my flash to the PC. But how do we do it? How do I know how to make use of this JTAG with my flash IC? My DSP kit is 6713B kit. And the PCB is ready. But now, we have to get the components soldered first. And is it possible to make use...

Hi Rick, >I could use some help with a design I am working on. I am using the >TMS320C6711B along with the MSP430F148 and two...

Hi Rick, >I could use some help with a design I am working on. I am using the >TMS320C6711B along with the MSP430F148 and two Xilinx FPGAs. I would like >to use all four devices in a single JTAG chain. But I understand that this >is not a good idea as the different

Dear c6x: I am a grad student working on TMSC6202. And I design a 6202 PCB. The PCB can not work. The main problem is the JTAG can...

Dear c6x: I am a grad student working on TMSC6202. And I design a 6202 PCB. The PCB can not work. The main problem is the JTAG can not work correctly. I use ALVC16245 as JTAG buffer. And I use pullup resistance on EMU0(pin 13), EMU1(pin 14),TMS(pin 1),TDI(pin 3),TDO(pin 7). Th

I am using a JTAG connector to program the C6711BGFN DSP chip situated as a module on the PC-104 data acquisition board our company ...

I am using a JTAG connector to program the C6711BGFN DSP chip situated as a module on the PC-104 data acquisition board our company developed. When I step through a program using TI Code Composer, the program hangs whenever the EMIF registers are accessed. Is this problem

HAI GUYS IAM USING C6202 AND CCS1.2 FOR MY APPLICATION. I FLASHED MY APPLICATION, IT WLL BOOT WELL AND WORKS FINE WHEN U...

HAI GUYS IAM USING C6202 AND CCS1.2 FOR MY APPLICATION. I FLASHED MY APPLICATION, IT WLL BOOT WELL AND WORKS FINE WHEN U CONNECT JTAG AND RUN, IF U REMOVE JTAG AND RESET THE BOARD IT WON'T WORK. THERE IS NO PROBLEM IN RESET AND BOOTING PROCEDURE........ , any idea?

Hi, I need to set up a PC to program the flash on a custom 6711 board using a JTAG emulator. FlashBurn appears to require CCS...

Hi, I need to set up a PC to program the flash on a custom 6711 board using a JTAG emulator. FlashBurn appears to require CCS 2.1 I really don't want to give our production department a full version of CCS. Is there anyway to use FlashBurn without CCS or does TI have a standal

Hello Everyone I have a problem about reflashing my device, I was trying to write a flash driver sw for our hw platform. I have erased the...

Hello Everyone I have a problem about reflashing my device, I was trying to write a flash driver sw for our hw platform. I have erased the contents of the flash(bootloader) and I was not able to reflash it again using JTAG emulation or whatsoever. SD config output is like this : ** Emulator Test ** $$ EmuProductName=XDS510USB $$ EmuPortAddr=0x510 $$ EmuPortMode=USB $$ ProductId=510...

hi i wanted to know the maximum data rate between host to target and vice versa on a DSK 6711 kit (JTAG interface) please let...

hi i wanted to know the maximum data rate between host to target and vice versa on a DSK 6711 kit (JTAG interface) please let me know about this thank u all seshu

Hi All, I try to debug two application at the same time, one is run on Host CPU (8051) and another is on DSP (6711). For...

Hi All, I try to debug two application at the same time, one is run on Host CPU (8051) and another is on DSP (6711). For debuging the DSP software I use XPS510PP_PLUS emulator via JTAG interface. The Host CPU is connected to DSP over HPI. Problem: When I try

Hi all We developped a board with four C6201 in the JTAG chain and want to debug them with the XDS510 Emulator and Code...

Hi all We developped a board with four C6201 in the JTAG chain and want to debug them with the XDS510 Emulator and Code Composer Studio Debug Tools 1.20. The DSPs are the only devices in the JTAG chain. The Emulator is connected as in the TI application note SPRA439, figure 5

We want to use RTDX with four TMS320C6701 in the JTAG chain and a Visual C++ COM client. Is it possible that each DSP has its own...

We want to use RTDX with four TMS320C6701 in the JTAG chain and a Visual C++ COM client. Is it possible that each DSP has its own channel to communicate with the Host? We found the following problem in the TIs database: "How to get RTDX

Problem with CCS and JTAG Hello everybody, we are developing an electronic card with a C6711 DSP. We have a problem...

Problem with CCS and JTAG Hello everybody, we are developing an electronic card with a C6711 DSP. We have a problem to use Code Composer Studio with our system. However, we

Does anyone know if it is possible to adapt a C6211DSK to use as a JTAG emulator? It looks as though all that is needed is to...

Does anyone know if it is possible to adapt a C6211DSK to use as a JTAG emulator? It looks as though all that is needed is to attach a cable from the DSK JTAG to the target header and ensure that the DSK's CPU is disabled (or dissconnected). Has anyone tried this?