The JTAG port is used both for debugging software in development and for boundary scan hardware test in production. Most of the PLD...

The JTAG port is used both for debugging software in development and for boundary scan hardware test in production. Most of the PLD vendors provide support in their programming software for other devices in the scan chain. But I have received mixed advice on putting TI DSPs in a scan chain

k.rathnasabapathy, Several different people have reported mysterious problems when using the TMS320C6727B-Wintech TDS510USB Emulator...

k.rathnasabapathy, Several different people have reported mysterious problems when using the TMS320C6727B-Wintech TDS510USB Emulator configuration. 6711 and 6713 devices work okay with the Wintech TDS510USB Emulator. IMO, The problem appears to be rooted in the software for the Wintech TDS510USB Emulator. The 6727 device has the longest JTAG scan chain of any C6000 device [and most lik...

Dear c6x: I am a grad student working on TMSC6202. And I design a 6202 PCB. The PCB can not work. The main problem is the JTAG can...

Dear c6x: I am a grad student working on TMSC6202. And I design a 6202 PCB. The PCB can not work. The main problem is the JTAG can not work correctly. I use ALVC16245 as JTAG buffer. And I use pullup resistance on EMU0(pin 13), EMU1(pin 14),TMS(pin 1),TDI(pin 3),TDO(pin 7). Th

Hi all, I?m trying load a COFF file (.out) since PC using hpi, but an error in Code Composer Studio is showed. The error is...

Hi all, I?m trying load a COFF file (.out) since PC using hpi, but an error in Code Composer Studio is showed. The error is "JTAG Communication error". To load the COFF file I?m using 'dsk6xldr' application provided by dsk 2.0 in 'C:\ti\examples\dsk6711\board_u

Anyone have any tips on production testing techniques for pc boards using the C64xx BGA chip? i.e. is Xray inspection of the BGA contacts...

Anyone have any tips on production testing techniques for pc boards using the C64xx BGA chip? i.e. is Xray inspection of the BGA contacts standard? Are there test programs using JTAG that can check for opens/shorts and do external memory bus testing? Has anyone gotten advice from TI in doing design-for-test with the C64xx that they could share? Thanks!

Hello, I've problem connecting the target via CCS 3.3 . I use JTAG adapter to connect to target in which I set the switches to default...

Hello, I've problem connecting the target via CCS 3.3 . I use JTAG adapter to connect to target in which I set the switches to default state(ie. All OFF state) It give the following error: Error connecting to the target: Error 0x80000240/-180 Fatal Error during: Initialization, OCS, This error was generated by TI's USCIF driver. SC_ERR_CTL_NO_TRG_POWER The con

Hello, I've problem connecting the target via CCS 3.3 . I use JTAG adapter to connect to target in which I set the switches to default...

Hello, I've problem connecting the target via CCS 3.3 . I use JTAG adapter to connect to target in which I set the switches to default state(ie. All OFF state) It give the following error: Error connecting to the target: Error 0x80000240/-180 Fatal Error during: Initialization, OCS, This error was generated by TI's USCIF driver. SC_ERR_CTL_NO_TRG_POWER The contro

I have a simple custom board populated with TMS320C6713B and a 16 bit Flash. CCS3.3 and XDS510 USB Plus are the tools to talk to the board through...

I have a simple custom board populated with TMS320C6713B and a 16 bit Flash. CCS3.3 and XDS510 USB Plus are the tools to talk to the board through JTAG interface. As the Flash is empty for the time being i just wonder if there would be any problem establishing communication with the DSP through JTAG. Please help me with any suggestions to establish communication between CCS and DSP through JTA...

Dear all Let me to explain my problem. I want to use JTAG for connect target (C6713 board not C6713DSK) and emulator. I have a big program and I...

Dear all Let me to explain my problem. I want to use JTAG for connect target (C6713 board not C6713DSK) and emulator. I have a big program and I want to save total of program on flash, then by secondary boot loader copy them to IRAM on DSP for running. How can I program flash? Is Gel file programmed on flash? Is it possible to program flash on board by DSP? For have a secondary boot loading, ...

Problem with CCS and JTAG Hello everybody, we are developing an electronic card with a C6711 DSP. We have a problem...

Problem with CCS and JTAG Hello everybody, we are developing an electronic card with a C6711 DSP. We have a problem to use Code Composer Studio with our system. However, we

Dear All I want program digitalspectrum c6455 DSK with WINTECH TDS510PLUSE Jtag Emulator, But when I connect board this error display Error...

Dear All I want program digitalspectrum c6455 DSK with WINTECH TDS510PLUSE Jtag Emulator, But when I connect board this error display Error connecting to the target: Error 0x00000220/-1022 Error during: Execution, OCS, PTI_ERR_ICE_WAIT_TO Error Occured at 0x00000000 Sequence ID: 0 Error Code: -1022 Error Class: 0x00000220 I/O Port = 240 Board Name: C64xx Rev 1.0 TDS510USB Emulator ...

Dear Sir, We have designed our custom board around TMS320DM6446 DSP+CPU and have bought XDS560R USB emulator from Spectrum Digital,...

Dear Sir, We have designed our custom board around TMS320DM6446 DSP+CPU and have bought XDS560R USB emulator from Spectrum Digital, Alongwith TI CCS3.3 (we bought CCS3.3 alongwith XDS560r from spetrum digital). Follwing are our hardware jumper settings for our board: COUT0 = 0 COUT1 = 1 COUT2 = 1 COUT3 = 1 YOUT[4:0] = 1111 JTAG EMU0 and EMU1 pins are connected with DSP EMU0 a...

HI, I am using tms320c642x dsp on my baord and when power on reset it is said that device configuaration pins are latched into boot...

HI, I am using tms320c642x dsp on my baord and when power on reset it is said that device configuaration pins are latched into boot configuaration register. Initially(when power on reset) i am selecting no boot mode (emulation mode), so dsp goes into wait state. I want to read the code through JTAG into the dsp and write that code into FLASH. My code is a C-code. How to read that code trough JTAG...

Hi, I face an issue while connecting xds560 PCI JTAG emulator to DM642 EVM. I've the xds560 emulator inserted in the PCI slot of the PC and...

Hi, I face an issue while connecting xds560 PCI JTAG emulator to DM642 EVM. I've the xds560 emulator inserted in the PCI slot of the PC and installed the driver for it. When I run the diagnostics of the xds560 emulator, all the tests in the diagnostics gets passed without any issue. In the CCS setup, I configured the DM642XDSEMULATOR option and tried opening the CCS. But I get an ERROR mention...

Hello everybody, I use a XDS510PP plus JTAG emulator by Spectrum Digital, but the diagnostic give me the following erro: ** Emulator Scan...

Hello everybody, I use a XDS510PP plus JTAG emulator by Spectrum Digital, but the diagnostic give me the following erro: ** Emulator Scan Test -- WriteVal1 0001, ReadVal1 ffff -- WriteVal2 fffe, ReadVal2 ffff -- WriteVal1 0002, ReadVal1 ffff -- WriteVal2 fffd, ReadVal2 ffff -- WriteVal1 0004, ReadVal1 ffff -- WriteVal2 fffb, ReadVal2 ffff -- WriteVal1 ...

Gentlemen, I am using TMS320C6412 DSP and I found that during power-on reset the values were correct in the pci memory mapped I/O registers...

Gentlemen, I am using TMS320C6412 DSP and I found that during power-on reset the values were correct in the pci memory mapped I/O registers but the JTAG id and DEVSTAT register was showing corrupt values but when I do the Manual reset using a switch, the JTAG id and DEVSTAT register are correct and pci memory mapped I/O register values get set to 0s. Is this normal to for the pci...

Hi all, is it possible to program flash memory without a Jtag Emulator (eg. with PCI Valley Tech driver)? Thanks

Hi all, is it possible to program flash memory without a Jtag Emulator (eg. with PCI Valley Tech driver)? Thanks

Hi,everybody: I have some question to ask,thank you in advance for your answer. 1) what is JTAG? 2)what is host port? ...

Hi,everybody: I have some question to ask,thank you in advance for your answer. 1) what is JTAG? 2)what is host port?

Dear All Very thanks for your advises, I can program c6455 DSK with Wintech TDS560 but Wintech TDS510plus does not work.

Dear All Very thanks for your advises, I can program c6455 DSK with Wintech TDS560 but Wintech TDS510plus does not work.

Hi! I need to transfer data between the C6713 and C6711 boards that allow me make them work together in a parallel program but i don't know the...

Hi! I need to transfer data between the C6713 and C6711 boards that allow me make them work together in a parallel program but i don't know the instructions or commands required to do it exactly. I have the 14-pin jtag cable already and i'm using CCS v3.1. I would like to view some examples or something useful to help me. Thanks!!!