Excuse me but how do you program your dsk with linux? If you can reply to me I'll stop to stole my dad's pc with Xp..Ok not with code composer...

Excuse me but how do you program your dsk with linux? If you can reply to me I'll stop to stole my dad's pc with Xp..Ok not with code composer studio, and how? Wine for some terminal program like c16? ok for the compiler. And for linker and loader? It is possible to use DSP/BIOS and all the files created with CCS ? bye!! > > > > > Hello, > > I've got a DSK6711 board connected

Hi, I am trying to overlay two sets of files into the same memory location in RAM. Basically, I want to dynamically copy them from ...

Hi, I am trying to overlay two sets of files into the same memory location in RAM. Basically, I want to dynamically copy them from two separate locations in flash in to RAM. I used the UNION directive to try and accomplish this task. I was able to get the linker to create .text1 and .text2 in the map file where the addresses are also in the corr

Mos, The reason that the result of the second compile is slower is probably that the compiler is doing optimization at the file...

Mos, The reason that the result of the second compile is slower is probably that the compiler is doing optimization at the file level. Try adding the -pm option to your list along with the -o3 and see if results are not better. The -pm option allows the compiler to have

Hi, I am using TMS320C6x EVM (C6200) and CCS version 1.0. In my application I am using DSP/BIOS to generate linker command ...

Hi, I am using TMS320C6x EVM (C6200) and CCS version 1.0. In my application I am using DSP/BIOS to generate linker command file. All the source files are compiled without errors individually. But when I build the project, I get the 2 following errors

I have both CCS 3.1 (DSK limited version) and CCS Platinum 3.3 (full) installed in my computer. Current I am working on DSK6713 board. Using...

I have both CCS 3.1 (DSK limited version) and CCS Platinum 3.3 (full) installed in my computer. Current I am working on DSK6713 board. Using CCS 3.1, generated memory map (part) file looks like: TMS320C6x COFF Linker PC v5.1.0 ***************************************************************************> > Linked Wed Oct 15 14:42:08 2008 OUTPUT FILE NAME:

Hello everybody, I have some problem debugging my C code: I have a C code compiled using the following options -g -pr...

Hello everybody, I have some problem debugging my C code: I have a C code compiled using the following options -g -pr -fr"$(Proj_dir)\Debug" -d"_DEBUG" -mo -mv6400 --mem_model:data=far --consultant I use fastrts64x library (setting this library as the first in the linker order). I do not modify this library (so I don'

Hi all. I have noticed that if change just a little the code I compile and link, the generated section allocation map can...

Hi all. I have noticed that if change just a little the code I compile and link, the generated section allocation map can change a lot. This seems to be due to the fact the linker attempts to minimize memory fragmentation (From section 7.12.2 of SPRU186m (TMS320C6000

Hi all, > > I am currently working with C6416 for "BPSK transmitter and receiver > with PLL" under section 10.11.4 in Rulph Chassaing's...

Hi all, > > I am currently working with C6416 for "BPSK transmitter and receiver > with PLL" under section 10.11.4 in Rulph Chassaing's book. > But I face an error while loading transmitter program, which sound > as "loader : One or more sections of your program falls into memory > region that is not writable. These regions will not actually be > written to the target. Check your linker

Hi all, I am currently working with C6416 for "BPSK transmitter and receiver with PLL" under section 10.11.4 in Rulph Chassaing's book. But...

Hi all, I am currently working with C6416 for "BPSK transmitter and receiver with PLL" under section 10.11.4 in Rulph Chassaing's book. But I face an error while loading transmitter program, which sound as "loader : One or more sections of your program falls into memory region that is not writable. These regions will not actually be written to the target. Check your linker configurati...

I have a with creating two buffers each of 8192 bytes in Internal memory (IRAM)-->I always get linking problem such like: error:...

I have a with creating two buffers each of 8192 bytes in Internal memory (IRAM)-->I always get linking problem such like: error: relocation overflow occured at address e.g. 0x00000430 in section '.text' Is it possible to create these buffers in IRAM and if so, can som

Hi, I have just bought a DSK6713 board from Spectrum Digital. Can anyone tell me if there is any small project comes with the CD that I can...

Hi, I have just bought a DSK6713 board from Spectrum Digital. Can anyone tell me if there is any small project comes with the CD that I can download. I would like to know about the following: 1. Initialization 2. Linker command file 3. Gel file 4. Some board test sample codes related to the board. I would like to have a working project. Any help will be appreciated. Thanks Sa...

I am writing a C++ application on C6415 using CCS 3. I use a C library for which I have to provide an interrupt handler (thus, that...

I am writing a C++ application on C6415 using CCS 3. I use a C library for which I have to provide an interrupt handler (thus, that function will be called using the C calling convention). However, this handler interacts with a C++ object and has to be defined in a C++ file. Is there a way to inform the compiler/linker to use C calling convention

hi i have written code and i want to put some part of it in internal memory(L2) of c6711 so that it can run fast is ther any way . more...

hi i have written code and i want to put some part of it in internal memory(L2) of c6711 so that it can run fast is ther any way . more over i want to put stack section of my code in the internal memory which is less than 64 k . i have to change linker command file of my proj according to it or i have to use pragma directive ?more over i m using dsp

My evergreen question is: how can I adjust my memory setting so that I get more space for static variables and program space??? ...

My evergreen question is: how can I adjust my memory setting so that I get more space for static variables and program space??? (I have found the heapsize parameter in the linker parameter section, but it only helps by dynamic allocation of variables. Doesn't it?) Tam?s

hi all, thank you for your quick reponses. i tried the DDR2 example project from spectrumdigital.com, which performs a quick write/read test....

hi all, thank you for your quick reponses. i tried the DDR2 example project from spectrumdigital.com, which performs a quick write/read test. i was able to get it running (without any section being in external SDRAM), but it failed right at the first attempt to read the previously written value... the project uses both the supplied GEL and linker CMD file. i assume my DDR2 is configured cor...

Who can help me, I want to locate some memory sections inside an external memory at load time. But they need to run from...

Who can help me, I want to locate some memory sections inside an external memory at load time. But they need to run from internal memory. I know how to set up the linker command file, and that I need a routine which takes care of copying from externam to internal memory.

Fab- Thanks for documenting your solution, that's helpful for the group. Yep, Richard is pretty good. -Jeff f...@yahoo.it wrote: > > ...

Fab- Thanks for documenting your solution, that's helpful for the group. Yep, Richard is pretty good. -Jeff f...@yahoo.it wrote: > > Hi to all. > > I am a student and I am trying to learn using DSP with th eDSKBoard 6713. > > I have a problem when I declare an array ( buffer1 ) in SDRAM, i.e. in the section ? .my_section ?. > > What I have done is: > > > > #pragma DATA_SECTION

Hi all, Can anyone tell me how can I solve this: TMS320C6x COFF Linker Version 4.00 Copyright (c) 1996-2000 Texas...

Hi all, Can anyone tell me how can I solve this: TMS320C6x COFF Linker Version 4.00 Copyright (c) 1996-2000 Texas Instruments Incorporated >> cannot allocate .image in SDRAM (page 0) >> errors in input - img_proc.out not built Build Complete,

Hi everybody, I am using TMS320C6201 and trying to compile a big program on it,when I want to build it all, in linker section it...

Hi everybody, I am using TMS320C6201 and trying to compile a big program on it,when I want to build it all, in linker section it says: "error: can not allocate .text" and "The output file was not built" The way that I tought that could work was that: Go to

I ran into a strange thing when compiling code for my DSP recently. I would like to know what is going on, if this is something I don't...

I ran into a strange thing when compiling code for my DSP recently. I would like to know what is going on, if this is something I don't understand in a difference of C vs C++, or something really strange in the Code Composer Studio Compiler / Linker. My understanding was that a a char array was simply dealt with as a pointer to the chunk of memory that was declared. The following