Forums Search for: Target
using csl for edma
hi friends I use the below program for setting up edma only by using csl library. it have been builds without any error.when i run its...
hi friends I use the below program for setting up edma only by using csl library. it have been builds without any error.when i run its run time message says that the target cant do priority 0 in qui edma. when i debuge the code I understand that the numbers that are defined in edmacfg0 config are not save to the related location in PaRAm but also
RTDX code
Hi, Does anybody has a simple example code for RTDX host in C (or C++, preferably C). I'm having problems in deciphering the...
Hi, Does anybody has a simple example code for RTDX host in C (or C++, preferably C). I'm having problems in deciphering the single CPP example code. And I can't find any manual on the subject - the BIOS manual only describes the target code. Thanx in Advanc
CCS - load program problem
Hi, I'm using CCS v2.20.18 with DM642 EVM XDS560 Emulator. When loading the target, CCS is closing right after the end of the...
Hi, I'm using CCS v2.20.18 with DM642 EVM XDS560 Emulator. When loading the target, CCS is closing right after the end of the loading. I reproduce this probleme only with big software (aroung 3MB). Is someone have seen this problem before ? Thanks Gre
Accesing I/O spaces problem
I got this really headache problem when trying to refresh the memory window for the I.O space via DSP CCS 2.21 using OMAP 1610 ...
I got this really headache problem when trying to refresh the memory window for the I.O space via DSP CCS 2.21 using OMAP 1610 this is the msg that come out Trouble Halting Target CPU : Error 0x00000022/-2140 Error during: Memory, Execution, Cannot access m
Reading list of floats from a file
inHi All - I am trying to run the following code to read in the lists of floats stored in different files. Right now, the code works...
Hi All - I am trying to run the following code to read in the lists of floats stored in different files. Right now, the code works as expected. However, if I try to increase the size of "nums" (ie: double nums [20]), the program crashes with the following error: Trouble running Target CPU: Illegal opcode (80004e
TMS320LF2407A flash programming error
Hi all, I've been working on a eZdsp LF2407A and now I've made my own card for my application but I can't load the program on flash...
Hi all, I've been working on a eZdsp LF2407A and now I've made my own card for my application but I can't load the program on flash memory. The program is the same as the one that worked on the eZdsp board, so I don't understand why loading fail. I have the following errors : "data verification failed at adresse 0x803D. please verify target memory and m
CCS IDE
Dear friends; when I load my *.out file to target (c5406 simulator) it send the following message after loading *.out file: loader: one or...
Dear friends; when I load my *.out file to target (c5406 simulator) it send the following message after loading *.out file: loader: one or more sections of your program falls into a memory region that is not writable...... and after running my program step by step after executing the following line of program it go to vertigo or "not responding" state and consumes 100% of cpu performance: f...
OMAP1510 connection problem
inHi All, I installed code composer with all the relevant drivers (USB including...from Spectrum Digital). When I start...
Hi All, I installed code composer with all the relevant drivers (USB including...from Spectrum Digital). When I start Code Composer Studio I get the follwong error: Can't Initialize Target CPU: Error 0x80000200/-1070 Fatal Error during OCS,
C55xx to C5510
Hello all!!! I am new to the usage of DSP hardware. I have a project which I was successful in simulating on the C55xx simulator. Now, I...
Hello all!!! I am new to the usage of DSP hardware. I have a project which I was successful in simulating on the C55xx simulator. Now, I have a C5510 target board connected via a XDS510 USB emulator. When I try to run the SAME project on this board, I see a wierd problem..... I am using probe points to accept input data. Instead of taking data in a seq
Memory Floating Point Display problem
inDear All, I am using C31 Target board with CCS 4.10. I had written a routine which calculate the square root of given number...
Dear All, I am using C31 Target board with CCS 4.10. I had written a routine which calculate the square root of given number and stored the result in to memory location (defined as .bss and is in internal RAM). If I select to view hex (TI 32 bit Hex) value, it showed me the co
getting error when try to connect..
hi, Actually i m using dsp processor kit ezdsp tms320f2812 from spectrum digital incorporation.. i have programmed the board successfully.But...
hi, Actually i m using dsp processor kit ezdsp tms320f2812 from spectrum digital incorporation.. i have programmed the board successfully.But my problem is that, now when i am trying to connect the board using ccsv3.1 compiler through emulator i m getting following error , Error connecting to the target: Error 0x80000200/-1031 Fatal Error during: OCS, Device driver: Problem with the Em...
HST target to host writerSize limit?
Hi all, I'm using CCS1.2+EVM67 and a test program that use HST channel to write file to the host. It seems that the maximum size...
Hi all, I'm using CCS1.2+EVM67 and a test program that use HST channel to write file to the host. It seems that the maximum size that I can write out for each PIP_put() call is 510 words (2040bytes). More than that and nothing comes out. The HST buffer and RTDX buffer are
load data..
Hi. At Pop-up menu, File=>data=>load.. In that way, I load GO DSP data into target board (at address 0x0040000) But I...
Hi. At Pop-up menu, File=>data=>load.. In that way, I load GO DSP data into target board (at address 0x0040000) But I don't know how I process this data.. That is, I want to assign this data to a variable and process this variable in my C-code..
Problem with the memory map file
Dear Radu, As far as I can see you are using the external memory to download the code. I am having the same problem whenever I would like to...
Dear Radu, As far as I can see you are using the external memory to download the code. I am having the same problem whenever I would like to use Full Memory Map option from DSPTgtPkg Target Preferences Menu :((. Matlab and TI support could not resolve the issue yet. The interesting thing is I am trying to run the demos provided by Matlab. (e.g. PWM Duty Cycle Control via Period Change c28...
Couldn't connect from CCS via XDS510 USB to eZdsp2812
Hi, I have eZdsp2812 from spectrum digital. its only have xds510 parellel interface. i am trying to connect via XDS510USB. But i couldn't...
Hi, I have eZdsp2812 from spectrum digital. its only have xds510 parellel interface. i am trying to connect via XDS510USB. But i couldn't connect. The error message was poped up is "your ccs does not support the target Device driver name:"C:\CCstudio_V3.1\drivers\sdgo28Xusb.dvr" Could anybody help me to connect to the board. Thx, regards, Kajan.
PP emulator problem with CCS3.1 but not CCS2.2
Dear Friends When I want to install the "xds510pp plus" emulator for CCS 3.1 after doing all required procedures the following message appears...
Dear Friends When I want to install the "xds510pp plus" emulator for CCS 3.1 after doing all required procedures the following message appears after setting up and running CCS3.1: Can't Initialize Target CPU: Error 0x80002240/-118 Fatal Error during: Initialization, OCS, Control, This error was generated by TI's USCIF driver. SC_ERR_CTL_PORT An invalid controller port value has
load binary files
I need to load a "real" binary file into target-RAM-memory (320LF2407A) via JTAG and CodeComposer. The only way to load into...
I need to load a "real" binary file into target-RAM-memory (320LF2407A) via JTAG and CodeComposer. The only way to load into memory that I know (GEL_MemoryLoad) only accepts the crude TI format (*.dat-files). If there is no other way: Does a converter exist to convert
Question on the Simulator in Code Composer
inHi, I would like to work with the simulator for TMS320F240. What am I doing wrong? I'm working with Code Composer 4.10. The...
Hi, I would like to work with the simulator for TMS320F240. What am I doing wrong? I'm working with Code Composer 4.10. The following message appears on the screen. "Trouble with Writing Target DSP memory Error number -2052 Error address 40 Memory Map Error: Ra
CCS 1.23 help,error-cant initialise target DSP
Hi all, I am new to this group and also to the code composer..I bought a code composer studio 1.23 (I hav windows 98) and...
Hi all, I am new to this group and also to the code composer..I bought a code composer studio 1.23 (I hav windows 98) and TMS320C6211 DSK one week ago..I installed the DSK and CCS..But whenever i try to open the CCS, I am always getting a window saying CPU-DSP Device dri
problem on using far mode
Dear Friends, I am doing AMR CODEC simulations on tms320c5416. I got a problem while using simulator, code compose studio. Code for AMR CODEC...
Dear Friends, I am doing AMR CODEC simulations on tms320c5416. I got a problem while using simulator, code compose studio. Code for AMR CODEC is very big. It is not sufficient to place at once section. So I created different sections which I attached the document. I got a problem "trouble in writing in target cpu memory" plz send me the reply if any body know.thank you..