omap3530 CCS board setup error

Started by jconway in comp.dsp9 years ago

I'm trying to install the OMAP3530_XDS510USB board in Code Composer Studio Setup. When I click 'Save and Quit', the error message: Error...

I'm trying to install the OMAP3530_XDS510USB board in Code Composer Studio Setup. When I click 'Save and Quit', the error message: Error automatically generating board data file.: An invalid router family was specified. I'm using CCS v3.3, CCS Setup version 5.98.0.219. Does anyone know what this means and how to fix it? Thanks, Jim


Using Visual Studio 8 Editor instead of CCS 3.3

Started by Brandon in comp.dsp11 years ago
CCS

I find CCS 3.3 to be quite terrible due to it's lack of class view, call browser, go to, and find features. I found the option in CCS to use an...

I find CCS 3.3 to be quite terrible due to it's lack of class view, call browser, go to, and find features. I found the option in CCS to use an external editor (devenv.exe), but it doesn't implement any of the fancy features. I assume that maybe devenv.exe isn't the trick? Thanks, -B


Migrating to CCS 3.0

Started by Holt in comp.dsp14 years ago 3 replies

I've made the migration from CCS 2.21 to CCS 3.0. Code that used to compile fine is now giving me errors. Here is the error I am getting on...

I've made the migration from CCS 2.21 to CCS 3.0. Code that used to compile fine is now giving me errors. Here is the error I am getting on all c files. "error: unrecognized cregister name 'FADCR'" "error: unrecognized cregister name 'FAUCR'" "error: unrecognized cregister name 'FMCR'" These are the 3 floating point registers which are no longer getting defined. I tried to search for...


I can't link ccs with my c6713 board by JTAG

Started by sunn...@126.com in comp.dsp13 years ago 1 reply

After I have setup the ccs in the condition of c671x XDS510 Emulator and want to enter into the enviroment of ccs , but it failed .It...

After I have setup the ccs in the condition of c671x XDS510 Emulator and want to enter into the enviroment of ccs , but it failed .It give me the error message as follows : Can't Initialize Target CPU: Error 0x80000200/-1031 Fatal Error during : 0CS, Device Driver: Problem with Emulation Controler. It Recommended to RESET Emulator.This will disconnect each target from the emulato...


Illegal operation TRAP on F2812

Started by JimHugh in comp.dsp12 years ago 2 replies
CCS

Hello, I am running CCS v3.3 on F2812. I set up a break point at asm(" ESTOP0"); in interrupt void ILLEGAL_ISR(void). Is there a trace...

Hello, I am running CCS v3.3 on F2812. I set up a break point at asm(" ESTOP0"); in interrupt void ILLEGAL_ISR(void). Is there a trace facility on CCS I can trace down the code caused ILLEGAL_ISR? If not, I've opened CPU register on CCS, the PC pointed to the ILLEGAL_ISR address, which CPU register on F2812 CCS hold the code address which caused ILLEGAL_ISR? Thank you. Jim ...


ccs problem

Started by krish_dsp in comp.dsp11 years ago 1 reply

Hi everyone, I am having a spectrum digital emulator board with TMS320c5416 dsp. I bought that and i installed the CCS in my desktop. When I...

Hi everyone, I am having a spectrum digital emulator board with TMS320c5416 dsp. I bought that and i installed the CCS in my desktop. When I connect the board and start the CCS, the USB is enumerated but then a error window is coming. It is like this title of the window: CPU_1- DSP DEVICE DRIVER. CONTENT: CAN'T INITIALIZE TARGET CPU I/O PORT : 540 BOARD NAME: SDGO5416DSK (SPECTRUM DIGITA...


RE: Cannot start TI CCS 3.10 Platinum EVAL with SD 'C6713 DSK (board v. 2)

Started by dafty in comp.dsp13 years ago 3 replies

Dear all, I am an EE Graduate Student working with a C6713 DSK. I'm currently having problems getting my 'C6713 DSK to work with the latest...

Dear all, I am an EE Graduate Student working with a C6713 DSK. I'm currently having problems getting my 'C6713 DSK to work with the latest edition of CCS (3.10 PE). I've installed the latest Spectrum Digital CCS 3.1 Platinum Emulation Drivers (release 3.01.04) from the SD support site (http://emulators.spectrumdigital.com/c6000/), but am still having no luck :(. I get the following err...


A link problem of c6713 to ccs

Started by sunn...@126.com in comp.dsp13 years ago 2 replies

After I have setup the ccs in the condition of c671x XDS510 Emulator and want to enter into the enviroment of ccs , but it failed .It give me...

After I have setup the ccs in the condition of c671x XDS510 Emulator and want to enter into the enviroment of ccs , but it failed .It give me the error message as follows : Can't Initialize Target CPU: Error 0x80000200/-1031 Fatal Error during : 0CS, Device Driver: Problem with Emulation Controler. It Recommended to RESET Emulator.This will disconnect each target from the emulator. T...


How to use dynamic loader in CCS?

Started by Jacky Huang in comp.dsp11 years ago 2 replies
CCS

Hi,all I just learned from some websites that there is a dynamic loader module in CCS. This dynamic loader supports dynamic loading excutable...

Hi,all I just learned from some websites that there is a dynamic loader module in CCS. This dynamic loader supports dynamic loading excutable code to an existing executable program in a DSP. However, I can not find dynamic loader module in my CCS v2.2. How can I get the dynamic loader? And how to use it? Does anybody have developped some applications using the feature? Need your help. Regar...


CCS setup

Started by seb in comp.dsp15 years ago 1 reply

Hello, i have a question about the configuration of CCS. I had a projet that i start using the DSK6713 board. In the CCS setup application, i...

Hello, i have a question about the configuration of CCS. I had a projet that i start using the DSK6713 board. In the CCS setup application, i choose the C6713DSK configuration file. ALL RIGTHS. Now that my application seems to works using the DSK, i need to compile the same application but for our own compagnie's acquisition card. Which is the rigth configuration file to choose ? C67xx...


How to load datum produced by Matlab to CCS?

Started by pete...@mir.knu.ac.kr in comp.dsp15 years ago 1 reply

I have designed a FIR filter by Matlab, and saved the filer coefficients as a data file. I want to utilize these coefficients on 6711DSK...

I have designed a FIR filter by Matlab, and saved the filer coefficients as a data file. I want to utilize these coefficients on 6711DSK board to do some calculation. But when I load the coefficient data file to CCS,CCS showed the data file can not be open. I don't know why I am always expecting your answer. 3x


CCS problem

Started by krish_dsp in comp.dsp11 years ago

Hi everyone, I am having a spectrum digital emulator board with TMS320c5416 dsp. I bought that and i installed the CCS in my desktop. When I...

Hi everyone, I am having a spectrum digital emulator board with TMS320c5416 dsp. I bought that and i installed the CCS in my desktop. When I connect the board and start the CCS, the USB is enumerated but then a error window is coming. It is like this title of the window: CPU_1- DSP DEVICE DRIVER. CONTENT: CAN'T INITIALIZE TARGET CPU I/O PORT : 540 BOARD NAME: SDGO5416DSK (SPECTRUM DIGITAL) ...


using dsplib +c6711dsk

Started by vai in comp.dsp15 years ago 1 reply
CCS

hi all im a bit new to the ccs, can some one explain to me how i can use the dsplib to program in the ccs?? if you can tell me where i...

hi all im a bit new to the ccs, can some one explain to me how i can use the dsplib to program in the ccs?? if you can tell me where i can find a sample code or somthing... any help at all?? thanks in advance vai


signalling in E1

Started by zultia in comp.dsp12 years ago
CCS

Hi all I couldn't understand the difference between CAS and CCS in the E1 multiframe, can any one help me with that please ? Second is there a...

Hi all I couldn't understand the difference between CAS and CCS in the E1 multiframe, can any one help me with that please ? Second is there a list of what are the words of the ABCD in the CAS/CCS for every channel ? thanks Avi


CCS Download

Started by asif911 in comp.dsp13 years ago 1 reply
CCS

Hi All, I'm a newbie in this forum. I just wanted to know if i can download CCS(the version that is compatible with TMS320C6XXX) from any...

Hi All, I'm a newbie in this forum. I just wanted to know if i can download CCS(the version that is compatible with TMS320C6XXX) from any website? Regards, Asif.


CCS v2 does not execute correctly

Started by Anonymous in comp.dsp12 years ago 4 replies
CCS

For example, I have a for loop, for (i=0; i

For example, I have a for loop, for (i=0; i


Problem with CCS v3.3

Started by sdses in comp.dsp12 years ago 1 reply

I start CCS v.3 from CCS Setup after configure devices using default configure. I get a error message : Error initializing emulator Board...

I start CCS v.3 from CCS Setup after configure devices using default configure. I get a error message : Error initializing emulator Board Name: OMAP1510 ES2 XDS560 Emulator Cpu Name: ARM9_0 Abort: Close Code Composer Studio. Retry: Try to initialize the emulator again. Ignore: Ignore the initialization error and start potentially without target debugging access. Diagnostic: Ru...


TI CCS problem: file operation

Started by Davy in comp.dsp14 years ago 8 replies
CCS

Hi all, I always work on VC and now I want to port my code to TI CSS. I read the CCS manual, and confused with file operation. I want to...

Hi all, I always work on VC and now I want to port my code to TI CSS. I read the CCS manual, and confused with file operation. I want to read data from a virtual data source. And write to another virtual data file. Does TI CCS support standard C file operation like "fopen" and "fread" and "putchar"? Any suggestions will be appreciated! Best regards, Davy


Broken TI EzDSP tutorial "volume"

Started by Chris Carlen in comp.dsp15 years ago 5 replies

Hi: I have the following problem: CCS for c2x 2.20.0, board rev 00.00.3184, target silicon 00.00.02 Using CCS (above version) and the...

Hi: I have the following problem: CCS for c2x 2.20.0, board rev 00.00.3184, target silicon 00.00.02 Using CCS (above version) and the Spectrum Digital EzDSP target board, and running through the tutorial, I have encountered the following problem with an example program: Tutorial|CCS IDE|Developing a simple program|Changing Program Options and Fixing Syntax Errors 1. at the bot...


problems connecting MSK2812 with CCS

Started by gioax in comp.dsp11 years ago

Hi everybody I have the Technosoft MSK2812 board, that is equipped with the TMS320F2812 DSP I would like to program my board with the CCS...

Hi everybody I have the Technosoft MSK2812 board, that is equipped with the TMS320F2812 DSP I would like to program my board with the CCS 3.0. First of all I tried toi program the board with the RS232 port, but then I read that it wasn't possible because the CCS has no emulators for the RS232, its'true??? So I tried to program my board using the JTAG port J5 with the XDS510PP PLUS JTAG EMULAT...