Build my own DSP dev board?

Started by evil engineer in comp.dsp16 years ago 5 replies

Hi, I'm a recent engineering grad who did 3 courses in DSP but never used an actualy dsp board (all our labs were in Matlab). Does anyone have...

Hi, I'm a recent engineering grad who did 3 courses in DSP but never used an actualy dsp board (all our labs were in Matlab). Does anyone have schematics for a TI or analog devices DSP development board. Or do you know of companies that sell discontinued boards? Thanks


Error Configuring CCS for Mistral Solutions OMAP3530 EVM

Started by tel12345# in comp.dsp11 years ago

Hi, I have a Mistral solutions OMAP3530 board and a XDS510PP jtag Emulator(From digital Spectrum). When I try to configure the board...

Hi, I have a Mistral solutions OMAP3530 board and a XDS510PP jtag Emulator(From digital Spectrum). When I try to configure the board in "CCStudio Setup", using the specific configuration for the mistral board (which is included with the XDS510PP drivers), it gives an error: "Error automatically generating board file. An invalid router family was specified". I am Using Code_Com...


Communicating with C54CST board without JTAG emulation?

Started by vamsikodavanty in comp.dsp15 years ago 2 replies

Hi, I have a TI C54CST eval board and I do not have any JTAG emulators. I just wanted to know if there was a way to communicate with the board...

Hi, I have a TI C54CST eval board and I do not have any JTAG emulators. I just wanted to know if there was a way to communicate with the board via the COM port on my PC. Is having a JTAG emulator the only way to do this? Thanks - Vamsi This message was sent using the Comp.DSP web interface on www.DSPRelated.com


problems connecting MSK2812 with CCS

Started by gioax in comp.dsp11 years ago

Hi everybody I have the Technosoft MSK2812 board, that is equipped with the TMS320F2812 DSP I would like to program my board with the CCS...

Hi everybody I have the Technosoft MSK2812 board, that is equipped with the TMS320F2812 DSP I would like to program my board with the CCS 3.0. First of all I tried toi program the board with the RS232 port, but then I read that it wasn't possible because the CCS has no emulators for the RS232, its'true??? So I tried to program my board using the JTAG port J5 with the XDS510PP PLUS JTAG EMULAT...


GAO EVM 2812 Evaluation Board

Started by David_embedded in comp.dsp14 years ago

Hi guys, I'm planning on buying TMS320 F2812 DSP Board from www.gaoengineering.com and was wondering if anyone has ever used it or similar...

Hi guys, I'm planning on buying TMS320 F2812 DSP Board from www.gaoengineering.com and was wondering if anyone has ever used it or similar board before..? You can find the product description and other documents at http://www.gaoengineering.com/index.php?main_page=product_info&products_id=84 DO let me know at your earliest because I need it for my Research Project this summer. David...


GAO EVM 2812 Evaluation Board

Started by David_embedded in comp.dsp14 years ago

Hi guys, I'm planning on buying TMS320 F2812 DSP Board from www.gaoengineering.com and was wondering if anyone has ever used it or similar...

Hi guys, I'm planning on buying TMS320 F2812 DSP Board from www.gaoengineering.com and was wondering if anyone has ever used it or similar board before..? You can find the product description and other documents at http://www.gaoengineering.com/index.php?main_page=product_info&products_id=84 DO let me know at your earliest because I need it for my Research Project this summer. David...


Low power consumption board with memory

Started by Duccio in comp.dsp14 years ago

Hi, I'm an italian student of Automation Engineering (..sorry for my academic english...). It's the first time that I post in this group. I...

Hi, I'm an italian student of Automation Engineering (..sorry for my academic english...). It's the first time that I post in this group. I would like to know if there is some fpga board (I've just used an Altera board for an exam of Electronic Digital Systems) that has this requirements: -low power consuption (for using with a solar panel), less than 100mA of current consumption at 3.3-...


TMS320C6416 DSK with CCS 3.1?

Started by Ralph A. Schmid, dk5ras in comp.dsp13 years ago 3 replies

Hi! For playing with DSPs at home I have a 6416DSK board, with the pseudo JTAG emulation via USB and CCS 2.2 what came with the board. Now...

Hi! For playing with DSPs at home I have a 6416DSK board, with the pseudo JTAG emulation via USB and CCS 2.2 what came with the board. Now I wanted to connect the board in the office, where we use CCS 3.x, but I could not find a way to make this work via USB, only with the real JTAG blackhawk emulator it is no problem at all. So what am I doing wrong? Is there really no way into the boa...


BF533-EZLITE Board Dimensions

Started by Chris Neumann in comp.dsp16 years ago 2 replies

I've bought the BF533-EZLITE Evaluation Board from Analog Devices. For a doughtercard design as well as mechanical integration I would like to...

I've bought the BF533-EZLITE Evaluation Board from Analog Devices. For a doughtercard design as well as mechanical integration I would like to have mechanical dimensions (location of the high density connectors and the mounting holes) for this board ( not available on AD's homepage :-( ) Christian Neumann


Sonitech Dual C40 VMEbus-based board

Started by Anonymous in comp.dsp14 years ago

Hi, Does anyone have the software/documentation/drivers for this board???? Thanks, Ram

Hi, Does anyone have the software/documentation/drivers for this board???? Thanks, Ram


Help getting from eval kit to debugable prototype board.

Started by Robert Norman in comp.dsp16 years ago 4 replies

Hi, I need to get a prototype DSP board up and running ASAP and was looking at the TI320LF2406 and the Motorola 56F803. Based somewhat on...

Hi, I need to get a prototype DSP board up and running ASAP and was looking at the TI320LF2406 and the Motorola 56F803. Based somewhat on price and GPIO pinouts I selected the TI part and got the eZDSP system kit thinking (incorrectly it appears) that I could develop and then move a design to a prototype board and debug the prototype without additional hardware. It is now sinking in that...


DSP development board with fast A/D

Started by dohm in comp.dsp14 years ago 1 reply

I am looking for a DSP development board for a bench-top project. I want to use an Analog Devices Sharc or equivalent TI processor. My input...

I am looking for a DSP development board for a bench-top project. I want to use an Analog Devices Sharc or equivalent TI processor. My input signal of interest is a LFM waveform with a 30MHz bandwidth (Lets assume it is at baseband for now). So, I would like to find a development board with dual A/D converters that sample > 30Msps. It would also be interesting to know if any development boards are


JTAG emulator doesn't work on target board! Please help!

Started by Christian in comp.dsp15 years ago 4 replies

Hi there! I've got a problem with my DSP target board. I'm currently using an XDS510PP plus Emulator (from spectrum digital) and a target...

Hi there! I've got a problem with my DSP target board. I'm currently using an XDS510PP plus Emulator (from spectrum digital) and a target board with one single TMS320VC5409 CPU. Also changed to C5416 without affect. I'm currently using CCS free evaluation tool v.2.21 from texas on a Win 2000 machine. When the emulator is connected to the C5416DSK, all functions well. But when I conn...


Which Dev Board?

Started by Mauritz Jameson in comp.dsp7 years ago 4 replies

Which development board would you recommend for a real-time audio application which involves 8 FIR filters? Each FIR filter has 3000 taps and it...

Which development board would you recommend for a real-time audio application which involves 8 FIR filters? Each FIR filter has 3000 taps and it must be able to process audio blocks at 96kHz. As far as I understand that is equivalent of approx. 2304 MMAC/sec if the core CPU is to perform the filtering. I'm not sure I will be able to find a development board that can handle this? Or am I wro...


signal gen

Started by johnstokes in comp.dsp12 years ago 1 reply

hi understand it is possible to get software programs for your pc that will allow you input sinewaves into board and then take analogue output...

hi understand it is possible to get software programs for your pc that will allow you input sinewaves into board and then take analogue output from board back into pc for evaluation?


RCA to BNC - any point?

Started by Barry in comp.dsp16 years ago 9 replies

Hi all, I have a Codec (2ADCs and 2DACs), which is capable of 16bit per channel sampling, at 96kHz. It interfaces to a DSP board. I...

Hi all, I have a Codec (2ADCs and 2DACs), which is capable of 16bit per channel sampling, at 96kHz. It interfaces to a DSP board. I have designing a pcb board capable of processing an analog music signal, and I'd like to interface it to an ADC on my codec. I'd also like to send a signal from the DAC to a second pcb board. I'm just wondering what would be the best way of doing this? The Cod...


Kalman Filter

Started by Anonymous in comp.dsp12 years ago 1 reply

I'm looking for a processor board that has build in A/D (3 channels) and 3 outputs for an inertial nav system. It will have a kalman filter on...

I'm looking for a processor board that has build in A/D (3 channels) and 3 outputs for an inertial nav system. It will have a kalman filter on board (maybe 9 states at least but I will implement the steady- state Kalman filter no Ricatti equations). Also fixed gains for state feedback control. It has to be reasonably compact and robust. I don't want a huge evaluation board - something more li...


JTAG for Analog Devices SHARC 21469

Started by Mauritz Jameson in comp.dsp6 years ago 21 replies

I've developed an application on a SHARC 21469 development board (EZKIT). One of my friends (an electrical HW engineer) has laid out the board for...

I've developed an application on a SHARC 21469 development board (EZKIT). One of my friends (an electrical HW engineer) has laid out the board for production duplicating everything from the schematics. When he got to the “communication” part of the schematic (i.e. the daughter board with an ASIC; the one that provides the JTAG USB interface), it says that the AD USB circuitry is


Audio Connection for BF 537 EZkit lite board

Started by isnithin in comp.dsp11 years ago

Hello Everyone, I am developing an Audio application project on ADSP Bf537 EZ-LITE board. I have developed compression and...

Hello Everyone, I am developing an Audio application project on ADSP Bf537 EZ-LITE board. I have developed compression and decompression algorithms for the Audio samples. The algorithm is working fine and I have tested it. Now I want to achieve live recording and output the recorded samples at the speaker/headphone connected at "LINE_OUT" port of the board. I have a Mike f...


omap3530 CCS board setup error

Started by jconway in comp.dsp10 years ago

I'm trying to install the OMAP3530_XDS510USB board in Code Composer Studio Setup. When I click 'Save and Quit', the error message: Error...

I'm trying to install the OMAP3530_XDS510USB board in Code Composer Studio Setup. When I click 'Save and Quit', the error message: Error automatically generating board data file.: An invalid router family was specified. I'm using CCS v3.3, CCS Setup version 5.98.0.219. Does anyone know what this means and how to fix it? Thanks, Jim