21061 EZ-Kit lite session

Started by nagelg in comp.dsp5 years ago 2 replies

Hello, I have tried the csv ?csv_adsp.zip? files from evert to support the adsp-21061 ez-lite kit. But it does not work. I have got the...

Hello, I have tried the csv ?csv_adsp.zip? files from evert to support the adsp-21061 ez-lite kit. But it does not work. I have got the files for the VisualDSP Version 3.0, 3.5 and 4.0. What must I do, that the EZ-Kit Lite works with V3.5 and V4.0. I have copied the csv files: - Regfile61_EZKIT.csv ( in system directory visualdsp ) - Regfile.csv ( "" "" ) into the visual dsp3.5 di


21061 EZ-Kit lite session?

Started by Jon Harris in comp.dsp10 years ago 9 replies

I want to use Visual DSP++ 3.5 to talk to an old 21061 EZ-Kit lite (and eventually a 21065L EZ-Kit) via RS-232. However, I can't seem to set-up...

I want to use Visual DSP++ 3.5 to talk to an old 21061 EZ-Kit lite (and eventually a 21065L EZ-Kit) via RS-232. However, I can't seem to set-up an appropriate session in Visual DSP++ 3.5. In the New Session dialog box, I don't seem to have the option listed for the 21061 EZ-Kit. Under Debug target, I do see "EZ-KIT Lite (ADSP-21xxx)". I choose that, but now my only choices for processor a...


ADSP21161N Ez-kit Lite

Started by MarekJ in comp.dsp10 years ago 9 replies

Hello, I have 21161N Ezkit lite with VisualDSP 4.5. I need very urgent to learn assembler and C on this processor. Could you help me and...

Hello, I have 21161N Ezkit lite with VisualDSP 4.5. I need very urgent to learn assembler and C on this processor. Could you help me and send as simple as possible program in assembler and also in C to start learnig? (for example arithemtic oper.) Marek


EZ-Kit Lite wanted

Started by PRCalDude in comp.dsp9 years ago 2 replies

If anyone has an EZ-Kit lite they'd like to sell me, I'm interested.

If anyone has an EZ-Kit lite they'd like to sell me, I'm interested.


On ADSP BF537 EZ kit Lite interface with Audio DAC

Started by isnithin in comp.dsp9 years ago

Hello, I am working with Analog Devices Blackfin BF537 EZ Kit Lite board. I am storing the 16 bit audio samples of a PCM .wav file in the...

Hello, I am working with Analog Devices Blackfin BF537 EZ Kit Lite board. I am storing the 16 bit audio samples of a PCM .wav file in the memory. My implementation is as follows


BlackFin and SDRAM On EZ-Lite Problems

Started by Kevin Harvey in comp.dsp14 years ago 11 replies

I've recently been trying to get the SDRAM working on my BF533 EZ-Kit Lite, to no avail! The development environment is supposed to setup the...

I've recently been trying to get the SDRAM working on my BF533 EZ-Kit Lite, to no avail! The development environment is supposed to setup the SDRAM registers by default, if this feature is enabled, which it is. I've also tried setting them up manually. The problem is if I try and modify the memory, say address 0x00000000 or 0x00000002, using the memory viewer it doesn't actually succeed ...


decimating AD1836 (EZ-KIT Lite 21161N)

Started by hbarcellos in comp.dsp9 years ago 5 replies

hello all, I work with EZ-Kit Lite 21161N and AD 1836, sample frequency in 48k ! how can I down the sample frequency to 8k ?? I know, I...

hello all, I work with EZ-Kit Lite 21161N and AD 1836, sample frequency in 48k ! how can I down the sample frequency to 8k ?? I know, I need decimate... but I don't know how !!! somebody know a article, book or something ?? thank's Henrique


Audio Limiter with EzKit Lite ADDS 2189M

Started by Roland Moschel in comp.dsp13 years ago 9 replies

Hi there, is there any example code to build an Audio Limiter with the EZKIT LITE 2189M Evaluation Board ? Any suggestions ? Thanks in...

Hi there, is there any example code to build an Audio Limiter with the EZKIT LITE 2189M Evaluation Board ? Any suggestions ? Thanks in advance Roland


ADSP-2181 EZ-Kit Lite

Started by gigel in comp.dsp9 years ago 1 reply

I've just bought a EZ-Kit Lite with ADSP-2181. Besides the application notes available on web, I would like a book based on ADSP-2181. Can...

I've just bought a EZ-Kit Lite with ADSP-2181. Besides the application notes available on web, I would like a book based on ADSP-2181. Can somebody recommend me one? Thanks


Blackfin EZ-KIT Lite

Started by Leon Heller in comp.dsp14 years ago 9 replies

I received my Blackfin EZ-KIT Lite (on special offer last month) yesterday, and got it working this afternoon. I had problems getting WinME to...

I received my Blackfin EZ-KIT Lite (on special offer last month) yesterday, and got it working this afternoon. I had problems getting WinME to start properly after installing the software, and eventually tried disabling the Norton virus software. This seemed to do the trick. I was thinking of creating a Yahoo group for users, but found that a Blackfin Interest Group already existed, so I jo...


Audio Connection for BF 537 EZkit lite board

Started by isnithin in comp.dsp9 years ago

Hello Everyone, I am developing an Audio application project on ADSP Bf537 EZ-LITE board. I have developed compression and...

Hello Everyone, I am developing an Audio application project on ADSP Bf537 EZ-LITE board. I have developed compression and decompression algorithms for the Audio samples. The algorithm is working fine and I have tested it. Now I want to achieve live recording and output the recorded samples at the speaker/headphone connected at "LINE_OUT" port of the board. I have a Mike f...


ADSP BF 533 EZ-KIT Lite video input/ouptu problem

Started by beanxp in comp.dsp11 years ago 1 reply

Hi, everybody, I want to use ADSP BF 533 EZ-KIT Lite to do some video processing. But right now I only have the board and audio input/ouput. To...

Hi, everybody, I want to use ADSP BF 533 EZ-KIT Lite to do some video processing. But right now I only have the board and audio input/ouput. To do video, what kind of camera and connector do i need(cheap ones)? Thanks!


Need help for ADSP TS 101S EZ-Lite Board

Started by Paul in comp.dsp12 years ago 1 reply

hi, greetings, I am doing a project using ADSP TS 101s EZ-Lite board. The problem is like this: I have some data between 0 and 1, and I...

hi, greetings, I am doing a project using ADSP TS 101s EZ-Lite board. The problem is like this: I have some data between 0 and 1, and I will output these data to the linkport on this board. I want to find a device that convert this data to a PWM generator as the duty cycle input. Any input is highly appreciated. thanks paul


Interfacing an SPI device to BF533

Started by maddy in comp.dsp10 years ago 4 replies

Hi all, I'm trying to connect an SPI device to BF533 EZkit lite. I cannot find any interface on the kit lite board for connecting SPI device....

Hi all, I'm trying to connect an SPI device to BF533 EZkit lite. I cannot find any interface on the kit lite board for connecting SPI device. there are interfaces for UART and SPORT connections which can be used to connect particular devices. Please let me know how to connect. Do i need to buy any extender card(daughter card), or do I need to use any external hardware. I'm totally confu...


Wanted - Analog Devices ADSP 2181 EZ-Kit Lite

Started by bryen in comp.dsp8 years ago 5 replies

Hi, I am trying to get hold of an Analog Devices ADSP 2181 EZ-Kit Lite. If anyone has one for sale or would consider selling one please let me...

Hi, I am trying to get hold of an Analog Devices ADSP 2181 EZ-Kit Lite. If anyone has one for sale or would consider selling one please let me know. Thanks


8kHz sampling rate on BF533 EZ-Lite

Started by alami in comp.dsp11 years ago

Hi community, I'm developing audio algorithm for speech enhancements. Unfortunately the BF533 EZ-Lite is not supporting this sampling rate. So...

Hi community, I'm developing audio algorithm for speech enhancements. Unfortunately the BF533 EZ-Lite is not supporting this sampling rate. So Analog told me to use the "Audio Extender BFAUD-EZEXT". Actually there is only a BF537 driver for this extender, but this is not usable for the BF533. Has somebody a driver to setup a AD1938 codec on the extender board? Cheers Michael


AD1854 problem with BF537 EZ Kit lite

Started by isnithin in comp.dsp9 years ago 1 reply

Hello Everyone, I am developing an audio application using Blackfin BF537 EzKit lite. I have some problems with DAC 1854 Sport interface. I...

Hello Everyone, I am developing an audio application using Blackfin BF537 EzKit lite. I have some problems with DAC 1854 Sport interface. I want to pass the audio data samples via SPORT interface to DAC 1854 without using DMA. I am writing to Sport 0 Tx register on receiving the SPORT0_TX interrup as follows *pSPORT_TX=*(audio_data); Should I need wait to check any status register of SPO...


ez-kit adsp 21364 problem: Can't set AD-21xxx in new session

Started by Jake in comp.dsp12 years ago 5 replies

Hi I just got an EZ-kit from Analog Devices (ADSP-21364). When I start VisualDSP for the first time a session window shows up. The manual...

Hi I just got an EZ-kit from Analog Devices (ADSP-21364). When I start VisualDSP for the first time a session window shows up. The manual states that I should select "EZ-kit LITE (ADSP-21xxx)" as debug target but I can't find it in the drop-down list. If I click the "Show all targets and platforms" I see "EZ-kit LITE (ADSP-21xxx)" in the drop-down list but it is in grey and I can't c...


ADSP-2181 reading 16 bit Data lines from EZ kit lite

Started by Girish in comp.dsp13 years ago 1 reply

Hello all, Is there any mechanism to read the data on the data pins of ADSP-2181 EZ kit lite (D0-D23)(or atleast 16 bits) like how we can...

Hello all, Is there any mechanism to read the data on the data pins of ADSP-2181 EZ kit lite (D0-D23)(or atleast 16 bits) like how we can read using programmable flags ?(Which can be made either input or output ports). In Programmable flags we can do like this AX0=0xff; //configure programmable flags for o/p dm(Prog_Flag_Comp_Sel_Ctrl)=AX0; AY1=0x61; //o/p 61 will appear on PF lin...


Problem calling C function from assembly pgm in 21369 EZ-kit lite

Started by Anonymous in comp.dsp11 years ago 3 replies

I have a 21369-based ez-kit lite with a nice audio i/o daughtercard. I'm using the vendor's assembly program (a basic talk-through...

I have a 21369-based ez-kit lite with a nice audio i/o daughtercard. I'm using the vendor's assembly program (a basic talk-through routine) and trying to call a C routine between reading the ADC sample and writing that sample to the DAC. The call to the C routine causes the talk-through to not generate any output. If I comment-out the C routine call the talk-through program works fine. V...