audio input extension for ADSP-21369 EZ-Kit Lite

Started by Arne Borsum in comp.dsp13 years ago 2 replies

Hi, I am developing audio applications on the ADSP-21369 EZ-Kit Lite board. The board has 8 channels audio output but only 2 channels input,...

Hi, I am developing audio applications on the ADSP-21369 EZ-Kit Lite board. The board has 8 channels audio output but only 2 channels input, although the DSP itself supports more channels. Now I am searching for a extension board for the EZ-Kit which provides 6 or more (analog) input channels. Is there anything like this availble? Regards, Arne Borsum


Connecting the ADSP 21061 EZKit - Lite w/o Serial Port

Started by Hari in comp.dsp15 years ago 8 replies

Hello All, I have a Toshiba laptop without a serial port. But I need to connect my ADSP 21061 EZKIT - Lite DSP board to it. I use it in...

Hello All, I have a Toshiba laptop without a serial port. But I need to connect my ADSP 21061 EZKIT - Lite DSP board to it. I use it in conjunction with Visual DSP++...So can anyone tell me if there is an alternate way to connect the board to my laptop without the serial port?? Remember, the only way to connect to the DSP board is an RS232 C connection... I need to refresh my VDSP knowle...


Question

Started by Anonymous in comp.dsp11 years ago 3 replies

Hello, can somebody help me? I would like to buy ADSP-2181 EZ Lite Kit.

Hello, can somebody help me? I would like to buy ADSP-2181 EZ Lite Kit.


Blackfin ADSP BF506F EZ Kit Lite

Started by HardySpicer in comp.dsp8 years ago 2 replies

Can't get Win7 to recognise the board at all. Anybody have any ideas? Hardy

Can't get Win7 to recognise the board at all. Anybody have any ideas? Hardy


Memory Overlay - ADSP

Started by karthikbalaguru in comp.dsp11 years ago 1 reply

Hi, I am trying to get more info about External Memory Overlay . In the document 'ADSP-218x External Overlay Memory By G. Y' from IEEE , i...

Hi, I am trying to get more info about External Memory Overlay . In the document 'ADSP-218x External Overlay Memory By G. Y' from IEEE , i find a reference to a document " PM/DM Overlay & I/O Memory Expansion Board for ADSP 2181 EZ-KIT Lite written by G. Yi.". But i am unable to get this ( PM/DM Overlay & I/O Memory Expansion Board for ADSP 2181 EZ-KIT Lite written by G. Yi ) document fr...


Blackfin 535 emulators

Started by DB in comp.dsp16 years ago 1 reply

Hello, I would appreciate to hear your opinions on using HPPCI Emulator vs USB type of Emulators for BF535 EZ-Kit Lite, and your...

Hello, I would appreciate to hear your opinions on using HPPCI Emulator vs USB type of Emulators for BF535 EZ-Kit Lite, and your recommendations/experiences. thanks, Dubi


Re: Windows XP tricks and tips

Started by Werty in comp.dsp12 years ago

D.O.A. , M$ will die soon . Hardware is everywhere , software will appear soon . All applications known will be obsolete...

D.O.A. , M$ will die soon . Hardware is everywhere , software will appear soon . All applications known will be obsolete . C , Linux are unuseable , bloat , dead Finally , the X86 to the history books ! Only had 2 index registers ! DS lite game box has simple BIOS , and is the base for the computer of the future . In the mean time , everyon...


dsp kit values?

Started by Brian in comp.dsp16 years ago 2 replies

I didn't know where else to ask this, please don't flame me too badly if this isn't the place. I have both a TI C2XX Dev. System from Wyle and...

I didn't know where else to ask this, please don't flame me too badly if this isn't the place. I have both a TI C2XX Dev. System from Wyle and an Analog Devices ADSP-2100 Family EZ-KIT Lite. Never used, software and manuals and boards all new. What would be the monetary value, if any? Offers to brian@NOSPAMMYw3gate.com remove CAPS


The ADSP-2181 EZ-Kit Lite

Started by Jack L. in comp.dsp15 years ago 5 replies

Our school is selling these EZ-Kit Lites out for almost nothing. I'm wondering if it's possible to put two or more together so they become...

Our school is selling these EZ-Kit Lites out for almost nothing. I'm wondering if it's possible to put two or more together so they become a parallel distributed computing system, as in, since they've 20 MIPS, can they become 20 MIPS x [number of 2181 together]? :) -- Mvh / Best regards, Jack, Copenhagen The email address is for real. :)


adsp-2181 ez-kit lite

Started by in comp.dsp13 years ago 6 replies

Hi everyone, I just dug up my ancient ADDS-21xx-EZLITE kit. I bought it many years ago and never really used it for much more that trying the...

Hi everyone, I just dug up my ancient ADDS-21xx-EZLITE kit. I bought it many years ago and never really used it for much more that trying the samples. I thought I might give it another try and installed the VisualDSP++ 3.5 Testdrive vrom the Analog.com website. Hooked it all up and: it sucks. The IDE hangs after almost every program download. With a lot of patience and a few restart...


Installation problem EZ-KIT lite for SHarc ADSP21161N

Started by Dave Moore in comp.dsp16 years ago 1 reply

For some reason, I get an error when trying to install the drivers on my laptop. The OS is Millenium. Anyone seen this problem? It finds...

For some reason, I get an error when trying to install the drivers on my laptop. The OS is Millenium. Anyone seen this problem? It finds the drivers ok and almost completes the installation, then crashes near the end. Is this an incompatibility problem with Me ? Anyone know? Thanks =^^= Dave Moore


Does anybody have experience on using shar memory for multiprocessors?

Started by Paul in comp.dsp13 years ago 1 reply

hi, there, I am current setting up a project to use ADST TS101 TigerSHARC EZ-Lite board with two ADSP TS101 DSPs. I want to setup the...

hi, there, I am current setting up a project to use ADST TS101 TigerSHARC EZ-Lite board with two ADSP TS101 DSPs. I want to setup the program so that these two CPUs can communite each other via share memory. Does anybody have such experience on this filed? or Would you please give me some reference? thanks. regards paul


Am I missing something obvious?

Started by Edison in comp.dsp12 years ago 7 replies

Hi I have recently started working with DSP systems. After a great deal of struggle with an EZ LITE KIT I have finally managed to get a...

Hi I have recently started working with DSP systems. After a great deal of struggle with an EZ LITE KIT I have finally managed to get a sensible result for an FFT, using an internally generated waveform for testing. Now for the problem: Now I have a reasonable looking FFT I thought I'd try and perform the FFT on two frequencies, the fundamental and its second harmonic. The strange thing i...


DSP newbie - experiment tools

Started by Frunobulax in comp.dsp14 years ago 6 replies

What is the best DSP experiment kit to get for a newbie who wants to get feet wet (especially audio processing)? Have tried EZ kit lite but are...

What is the best DSP experiment kit to get for a newbie who wants to get feet wet (especially audio processing)? Have tried EZ kit lite but are there any better ones?


ADSP-212xxx: Problem with VisualDSP++ 4.0

Started by rob.hutchins in comp.dsp14 years ago 6 replies

Hello list, First off: I apologize if this is not a list to which I should post questions about the ADSP-212xx EZ-KIT lite and its IDDE -...

Hello list, First off: I apologize if this is not a list to which I should post questions about the ADSP-212xx EZ-KIT lite and its IDDE - VisualDSP++. I couldn't find an active Analog Devices related board and this seemed to be the place I could get help at. I had to uninstall VisualDSP++ 3.5 this morning as it would not open a debug session, and I installed VisualDSP++ 4.0 which I down...


jpeg codec help with libjpeg6-b

Started by giobeniamino in comp.dsp13 years ago 2 replies

Hi, My name is Giorgio, i'm student ( Electrical and Conputer Science Engineer) and new on the DSP. For my final test i've to implement...

Hi, My name is Giorgio, i'm student ( Electrical and Conputer Science Engineer) and new on the DSP. For my final test i've to implement a JPEG real-time decoder on BF-533 EZKIT-lite. On Google's Group i've read that some of you used the lib of IJG (libjpeg6-b) for coding the jpeg format. I would like to use the same library instead of the analog SDK ( the jpeg6-b is open source with full ...


max. performance

Started by mswierzy in comp.dsp13 years ago

Hi @ll, i am a a newbie to DSP's and have a lot of questions. My first problem is the perfomance. I have a ADSP-BF535 EZ-Kit Lite. There is...

Hi @ll, i am a a newbie to DSP's and have a lot of questions. My first problem is the perfomance. I have a ADSP-BF535 EZ-Kit Lite. There is an example how to alternate blinking PF0/PF2 and PF1/PF3 using a delay loop I try to get the max. performance but i couldn't alternate the pins faster then with 8 MHz. Please tell me how to modify the C-Source to get the max. perfomance. /****...


32-Bit FFT

Started by bluewhite69 in comp.dsp13 years ago 2 replies

i am using ADSP-BF533 EZ-Lite I need a 32-Bit FFT for 24-Bit ADC written in ASM. A own FFT written in C is probably not fast...

i am using ADSP-BF533 EZ-Lite I need a 32-Bit FFT for 24-Bit ADC written in ASM. A own FFT written in C is probably not fast enough. I've found only different 16-Bit FFT's in the Libs. Thx for Help.


The changing of sampling rate of AD1819A

Started by Marek in comp.dsp14 years ago 4 replies

Hello, everybody. I'm just a beginner. I use ADSP-21065L SHARC EZ-KIT Lite where is codec AD1819A. The default sampling rate is 48 kHz and I need...

Hello, everybody. I'm just a beginner. I use ADSP-21065L SHARC EZ-KIT Lite where is codec AD1819A. The default sampling rate is 48 kHz and I need to change it. But it's so difficult for me to do it. I would like to change it for example from 48 kHz to 8 kHz. Please help me if you can. Thank you very much Marek The code: /*---------------------------------------------------------------------...


Looking for FIR in C for 21061 EZ-Kit

Started by Jarek in comp.dsp12 years ago 1 reply

Hi there, Is this true, that's impossible to create properly working FIR using VisualDSP 3.0 for 21061 EZ-Kit ? I tried to run simple FIR...

Hi there, Is this true, that's impossible to create properly working FIR using VisualDSP 3.0 for 21061 EZ-Kit ? I tried to run simple FIR (using different codes, samplerates and coefficients), and only what I got is noise :( Is there anybody, who have a working FIR filter project written in C for 21061 EZ-Lite ? Thanks, Jarek