flash TMS320F2812

Started by Yvo in comp.dsp14 years ago 4 replies

I want to program the flash memory from a program running into the DSP. Is this possible and where can I find information about the way to do...

I want to program the flash memory from a program running into the DSP. Is this possible and where can I find information about the way to do this? It seems the internal bootloader can load a program from some ports but as I see is, the program is stored in RAM and not in flash as the JTAG does. Am I right about this? Tnx


ADI BlackFin ICE100B

Started by Vladimir Vassilevsky in comp.dsp8 years ago 2 replies

The ADI offers ICE100B JTAG emulator for BlackFin for only $150. Is it a good tool? Any personal experiences, references? Vladimir...

The ADI offers ICE100B JTAG emulator for BlackFin for only $150. Is it a good tool? Any personal experiences, references? Vladimir Vassilevsky DSP and Mixed Signal Design Consultant http://www.abvolt.com


TI DM642 JTAG Emulation Just Stops

Started by Randy Yates in comp.dsp14 years ago 4 replies

Hi Folks, I had a strange experience this past week (well, maybe not so strange for TI...) in which I started a fresh copy of Code Composer...

Hi Folks, I had a strange experience this past week (well, maybe not so strange for TI...) in which I started a fresh copy of Code Composer Studio (I'm using 2.18, I think), so that there were no breakpoints or other debugging session setup, and then loaded and ran (via F5/Run) an executable into a TMS320DM642. Then during the processing of subsequent host processor messages (via the PCI b...


XDS510PP TMS320F2812

Started by franck in comp.dsp13 years ago 5 replies

Hi, I have a problem to connect my XDS510PP to my eZdsp F2812 board. The XDS510PP led does not turn on. Consequently, I think it does not...

Hi, I have a problem to connect my XDS510PP to my eZdsp F2812 board. The XDS510PP led does not turn on. Consequently, I think it does not work due to a lack of power. I have the XDS510PP connected to the eZdsp, 5V for the PD pin on the 14pins JTAG connector. Do I need any driver ? I checked in SDConfig the connection but there is nothing. Do I need to configure it in CCS setup before ...


Emulator USB or XDS510PP for TI

Started by kaashif in comp.dsp13 years ago 3 replies

Hi, I found a USB 2.0 Emulator for TI and also the XDS510PP JTAG Emulator again for TI. The products were from a company by the name of...

Hi, I found a USB 2.0 Emulator for TI and also the XDS510PP JTAG Emulator again for TI. The products were from a company by the name of GAO Engineering and their URL - www.gaoengineering.com . I'm having troubles deciding which emulator would be a better option in tems of debugging, speed. Any help would be appreciated.


blackfin silicon revision at runtime?

Started by Andre in comp.dsp6 years ago 5 replies

Dear all, maybe this is a homework issue, but I didn't find it in help on on the web: Is anybody aware of a method to detect the silicon...

Dear all, maybe this is a homework issue, but I didn't find it in help on on the web: Is anybody aware of a method to detect the silicon revision of ADI blackfin at runtime? The JTAG interface obvously can, so could my firmware? Best regards, Andre


Serial boot for TMS320F2811

Started by Geoffrey Mortimer in comp.dsp14 years ago 1 reply

Hi Due to the unexpected availability of a good signal generator, I urgently need to be able to execute code on 2811 system which has an...

Hi Due to the unexpected availability of a good signal generator, I urgently need to be able to execute code on 2811 system which has an asynchronous serial port but no JTAG debug interface. Does anybody know of or have a PC utility which uses the serial bootloader either to load code directly into RAM or program the flash? Many thanks in advance Geoff


Emulator/programmer for TI TMS320F2812 DSP.

Started by Roberto Waltman in comp.dsp14 years ago 3 replies

Looking for recommendations on a JTAG programmer / emulator for a product under development. The target processor is a TI TMS320F2812 DSP,...

Looking for recommendations on a JTAG programmer / emulator for a product under development. The target processor is a TI TMS320F2812 DSP, and the software is written using TI's Code Composer's Studio V2.2 Thanks, Roberto Waltman. [ Please reply to the group, return address is invalid ]


ADSP-14060 Board?

Started by Al Clark in comp.dsp8 years ago

I am potentially working on an existing product that uses an ADI ADSP-14060 (Quad SHARC). My task is strictly software. I might like to...

I am potentially working on an existing product that uses an ADI ADSP-14060 (Quad SHARC). My task is strictly software. I might like to buy a working board that includes this processor and a JTAG connection. Does anyone have something that might work? Al Clark Danville Signal


JTAG Suggestions For TI 28xx DSPs

Started by Jack Klein in comp.dsp15 years ago 3 replies

We've been developing several boards with the TI 2812 DSP for the past few months and have been having reliability problems with the...

We've been developing several boards with the TI 2812 DSP for the past few months and have been having reliability problems with the Spectrum Digital XDS510 PP+ emulators that we bought bundled with Code Composer Studio and evaluation boards from TI. Two of the four are malfunctioning right now, and they're going back to Spectrum Digital for repair or replacement. I'm not saying that ther...


SHARC gnICE

Started by Anonymous in comp.dsp5 years ago

Hello, Anyone has experience using gnICE with SHARC processors? I'd like to know if it's possible to download a dxe file through the gnICE...

Hello, Anyone has experience using gnICE with SHARC processors? I'd like to know if it's possible to download a dxe file through the gnICE JTAG interface into any SHARC processor. I wouldn't care to lose emulation capabilities or integration with VisualDSP++. I know that emulation is currently restricted to propietary tools. Thanks in advance, Marcos


Help on different types of emulators

Started by DSP-novice in comp.dsp15 years ago 12 replies

Can someone send me a link or name of books where I can find some useful understanding of the topic EMULATORS. I am kind of unsure if I do...

Can someone send me a link or name of books where I can find some useful understanding of the topic EMULATORS. I am kind of unsure if I do understand how they work and I have seen people use the terms pretty loosely. JTAG Emulators, PCI based Emulators, In-circuit Emulators, etc... etc.. What do they do in terms of writing a DSP code, with relation to the target board. How does running ...


Emulation Problems with the TMS320F2809

Started by Randy Yates in comp.dsp8 years ago 2 replies

Hello, We're using CCS 3.3 and the Signum JET-C2000 JTAG solution. I'm having trouble connecting consistently to the F2809. I can...

Hello, We're using CCS 3.3 and the Signum JET-C2000 JTAG solution. I'm having trouble connecting consistently to the F2809. I can connect to a working F2809 the first time, flash it using the flash tool inside CCS, and run the code. However, from that point on I can't stop the emulator, and once disconnected I can't reconnect. For example, this is a message I get when I attempt to reconn...


Unable To Clear TMS320LF2406A

Started by Kris Paciura in comp.dsp14 years ago 1 reply

Hi there if sombody could help me with this problem. I was using my pcb with TMS320LF2406A processor and everything was ok suddenly the...

Hi there if sombody could help me with this problem. I was using my pcb with TMS320LF2406A processor and everything was ok suddenly the error Unable To Clear stoped me and now I can not program it anymore. I was try using Jtag and RS232 Processor still works but I can not upload new software I try to unlock password with numbers in 0x0040 0x0041 0x0042 0x0043 but it does not work. If anybod...


Problem with the communication between DSP and JTAG

Started by sunn...@126.com in comp.dsp12 years ago 9 replies

Hello,everyone! My question is : When I click CCS, I can not enter into it.At the same time,I checked 1. the signal of TDI only changed...

Hello,everyone! My question is : When I click CCS, I can not enter into it.At the same time,I checked 1. the signal of TDI only changed once,then it kept high. 2. the signal of TDO did not change at all. 3. TRST changed from low to high, then kept high. 4. RESET had no changes, but kept high all the time. I try it again and again, everytime I got the same result. Can you tell me why, thank...


How to read to DSP internal RAM through JTAG without Emulator (or CCS)

Started by Xiaohu in comp.dsp14 years ago 2 replies

Hi Experts, We want to read simple RAM data from DSP through JTAP with no emulator ( and CCS). How should we do it? Your help is greatly...

Hi Experts, We want to read simple RAM data from DSP through JTAP with no emulator ( and CCS). How should we do it? Your help is greatly appreciated. Ruth


BIOS 5.31 and HST module

Started by UglanceIcatch in comp.dsp12 years ago

Hello, I read in the latest version of BIOS API manual (SPRU403m) that the HST module will not be supported in future releases. This seemed...

Hello, I read in the latest version of BIOS API manual (SPRU403m) that the HST module will not be supported in future releases. This seemed like a convenient way to communicate with a host processor. Are there other means (within the BIOS framework) of communicating with the host? My understanding of RTDX is that it is used with JTAG. Thanks for any info on this topic. Eknath


TMS320C6713BGDP300 does not even trying to boot....

Started by Anonymous in comp.dsp14 years ago 2 replies

We've got a couple of boards (just developed project) with the subj processors. It appears to be fully OK except one thing: the DSP does not...

We've got a couple of boards (just developed project) with the subj processors. It appears to be fully OK except one thing: the DSP does not even trying to boot from the on-board flash. The flash has been burned by the FlashBurn program (that implies using of JTAG Emulator and, of course, DSP-in-order). If then I set the core's program counter PC (via CCS) to the address 0x90000000 and run,...


Q: Ad's VisualDSP (for Blackfin) with VMWare ?

Started by Karl M. Prager in comp.dsp14 years ago 4 replies

Hi! I am planning to use VisualDSP for a Blackfin project. Now, as we are working only with Linux - have one of you gurus today...

Hi! I am planning to use VisualDSP for a Blackfin project. Now, as we are working only with Linux - have one of you gurus today running the VDSP with W2000 by VMWare under Linux _and_ is able to use the USB-JTAG emulator? I googled only one negative report of this group five years ago. Is it working now? Thanx, Charlie


Bringing up a new board with TMS320VC33. Problem stepping in CodeComposer..

Started by Thomas Gunnarsrud in comp.dsp12 years ago 6 replies

I've been given this new board to bring up. I see two problems (maybe they're related). The board features external RAM mapped from address...

I've been given this new board to bring up. I see two problems (maybe they're related). The board features external RAM mapped from address 0. The DSP is configured to run in Microprocessor mode for now during debugging and just load directly to RAM from the XDS510USB JTAG emulator. The connection to the board seems to be fine and I can manipulate values in RAM. 1. I cannot step. Try...