## Forums Search for: LMS

## LMS desired input

Dear all my name is payam, my research area is on control noise with adaptive filter but as you now the LMS block has an input link with the...

Dear all my name is payam, my research area is on control noise with adaptive filter but as you now the LMS block has an input link with the name of desired input, how can i define the desired input for this block if i want to control the noise in unknown models? with best wishes payam

## adaptive line enhancer

Hi, I am trying to generate the matlab codes for an LMS/NLMS ALE. Does anyone has any example codes? Thanks in advance.

Hi, I am trying to generate the matlab codes for an LMS/NLMS ALE. Does anyone has any example codes? Thanks in advance.

## help---ecg

inhi i m looking for an ecg signal. my project is an adaptive noise canceler (lms), 50 hz power line interference from ecg. i ll be very...

hi i m looking for an ecg signal. my project is an adaptive noise canceler (lms), 50 hz power line interference from ecg. i ll be very appreciated for any help thanks

## iteration

inHi, I have the following situation. In LMS algorithm I enter my input x as M by 1 matrix where M is number of taps and my weight...

Hi, I have the following situation. In LMS algorithm I enter my input x as M by 1 matrix where M is number of taps and my weight vector is also M by 1.I initialize my w with all zeros. Now at time n e(n)= d(n)- w(n)'*x(n); w(n+1)=w(n)+mu*w(n)*e(n); I have to i

## Fw: Adaptive Equalization

Hi everyone, I am doing my thesis on channel equalization. I am able to use the classical LMS and RLS algorithms using a Decision feedback...

Hi everyone, I am doing my thesis on channel equalization. I am able to use the classical LMS and RLS algorithms using a Decision feedback equalizer object. The problem I face however, is when I try to create create a neural network object. Does anyone out there has a sample code? Kindly assist.

## 3125BASE-T transciever in Matlab

Hello, I'm a Matlab beginner. I am working on a project to boost 1000BASE-T to 3.125Gbps or persue the feasability of doing so....

Hello, I'm a Matlab beginner. I am working on a project to boost 1000BASE-T to 3.125Gbps or persue the feasability of doing so. I have done some work with DSP (in C) during undergrad, using LMS for noise cancellation. I am trying to build a model for a 3125BASE-T

## Simulink to EzkitLite... Help needed

inHello people! I need some help from you: My name is Jean-Pierre Giusto and I'm from Chile. I'm working in a feedback...

Hello people! I need some help from you: My name is Jean-Pierre Giusto and I'm from Chile. I'm working in a feedback eliminator system based in a LMS algorithm. For this purpose, I have a model made with Simulink. First of all, if the system works with external si

## Adaptive Equalization

inHi, I am looking the code for an adaptive channel equalizer. I have to do system identification in which i will pass a predefined signal or a...

Hi, I am looking the code for an adaptive channel equalizer. I have to do system identification in which i will pass a predefined signal or a recorded .wav file and white Gaussain noise will be added to the signal and using MMSE techtnique and LMS. I want to find the inverse of the channel so that the resulting output should be the same as input. i.e H(z)=1/W(Z) ...

## PN Sequence with Bpsk

inHello I have a very urgent problem and i need some help. I need to make a program that will use LMS algorithm to detect 2 users...

Hello I have a very urgent problem and i need some help. I need to make a program that will use LMS algorithm to detect 2 users in a system that uses bpsk modulated PN sequence. I have made Pn sequence generator to spread and despread the message but haven't still managed to m

## adaptive beamforming algorithm

Hi, I am new to the group and in fact new to adaptive algorithm.I was wondering if anyone could help me providing a sample code...

Hi, I am new to the group and in fact new to adaptive algorithm.I was wondering if anyone could help me providing a sample code like LMS, CMA for adaptive beamforming algorithm. with Thanks in advance. Tqgsa

## two dimensional tracking

Hi everyone, I am working on a kalman filtering problem,but i don't understand how this algorithm is being used for two ...

Hi everyone, I am working on a kalman filtering problem,but i don't understand how this algorithm is being used for two dimensional tracking of the position variables.Unlike LMS,NLMS and RLS algorithm I couldn't figure out what's going on in this kalman filter as it is co

## Re: adaptive noise cancelling with simulink

Hi there. I'm trying to implement with LMS algorithm. But I can't make it work at the DSK 6713... Best regards, Pedro > > > >...

Hi there. I'm trying to implement with LMS algorithm. But I can't make it work at the DSK 6713... Best regards, Pedro > > > > With which algorithm? Could you specify your setup a bit more clearly? > I have a setup that i think you could use. > N > > --- In , "suc" wrote: > > Hi, just wondering if anyone has simulink model of adaptive noise > > cancellin

## Re: [Fwd: Re: Re: problem in normalization factor in low pass filter implementation]

Hi Premkiran Mannava, The lms algorithm for adaptive filtering is not that complex to implement. just get hold of this book - ...

Hi Premkiran Mannava, The lms algorithm for adaptive filtering is not that complex to implement. just get hold of this book - Adaptive filtering by Simon Haykin hope this helps. logesh. > Premkiran Mannava- > >

## GUIs for adaptive filtering

ini need to build a GUI in matlab that shows an LMS adaptive filtering system used for noise cancellation can u tell me of good...

i need to build a GUI in matlab that shows an LMS adaptive filtering system used for noise cancellation can u tell me of good sites on this subject... anywhere i can find mfiles or GUIs that do adaptive filtering plz tell of good resources or help thnx

## how to minimize bit error rate?

i done the following program for adaptive equalization using lms algorithm. but the BER is about 0.5. how to minimize the BER? please help...

i done the following program for adaptive equalization using lms algorithm. but the BER is about 0.5. how to minimize the BER? please help me........ M = 16; % Size of signal constellation k = log2(M); % Number of bits per symbol n = 3e3; % Number of bits to process nsamp = 1; % Oversampling rate %% Signal Source % Create a binary data stream as a column vector. x = randint(n,1); % R...

## Decision Feedback Equaliser

Hello I have implemented Decision Feedback Equaliser where I dont knw the channel at RX. I am using Proakis Channel C and I am using LMS algo...

Hello I have implemented Decision Feedback Equaliser where I dont knw the channel at RX. I am using Proakis Channel C and I am using LMS algo to train my filters. Now my problem is: 1. I am not getting any gain over uncoded performance: I think because DFE creates burst of errors because of errors in feedback path. And not a single code can correct this burst error unless we use interlea...

## Estimated chan filters for Xtalk and Echo in a 4 chan DSL system using LMS

I have researched crosstalk and echo (return loss) channels for a four wire twisted-pair cable and have come up with frequency ...

I have researched crosstalk and echo (return loss) channels for a four wire twisted-pair cable and have come up with frequency responses for each element. I now want to construct approximate filters for the attenuation, echo and crosstalk channels in order to perform noise cancellati

## Re: [Fwd: Re: Re: problem in normalization factor in low pass filter implementation]

Its fun trying to implement LMS on Matlab, but if you are pressed for time, there should be couple of examples on the web , for...

Its fun trying to implement LMS on Matlab, but if you are pressed for time, there should be couple of examples on the web , for instance http://www.utdallas.edu/~golden/ MATHANN/ANNSOFTWARE.html or can try

## Problems using Simulink 2006a and CCS 3.2

Hi, I'm using a TMS320C6713DSK with MATLAB 2006a and CCS 3.2. I tried to implement an example out of Simulink for the 6713DSK...

Hi, I'm using a TMS320C6713DSK with MATLAB 2006a and CCS 3.2. I tried to implement an example out of Simulink for the 6713DSK (Frequency-Domain Block LMS Echo Canceler). The problem is that this doesn't work, I get the following error message out of Simulink: Error building Real-Time Workshop target for block diagram 'c6713dskfblms'. MATLAB error message: Error using ==> generate_CDB

## Proakis Channels

inHi everybody... I am trying to implement LMS equaliser for Proakis Channel B which has coefficients [0.407 0.815 0.407]. Now the problem is...

Hi everybody... I am trying to implement LMS equaliser for Proakis Channel B which has coefficients [0.407 0.815 0.407]. Now the problem is that I am not getting the perfect BER plot. If I remove the precursor and implement the channel e.g. [1 0.815 0.407] then I am getting good plot. But not with the exact proakis channel B. I guess the problem is with tap settings. I have tried everything...