CodeWarrior 5.1 Issues

Started by Litinas, Terry in Freescale DSPs17 years ago 3 replies

Hi All, I have recently upgraded from CodeWarrior 5.0.5 to 5.1.1 and SDK 2.5 to 3.0 and wanted to share some of my experience...

Hi All, I have recently upgraded from CodeWarrior 5.0.5 to 5.1.1 and SDK 2.5 to 3.0 and wanted to share some of my experience as well as ask a question of you all. First, I did not create new project files and drag my source files into them because there are close


Local variable declaration

Started by hyzhou_14850 in Freescale DSPs18 years ago 1 reply

Hi, everyone: I am experiencing a strange problem with my DSP56803EVM and CodeWarrior 5. My application talks to a PC...

Hi, everyone: I am experiencing a strange problem with my DSP56803EVM and CodeWarrior 5. My application talks to a PC through the EVM??s serial port and the user LED toggles if the 1ms interrupt works fine. The communication was OK when the CodeWarrior target sett


codewarrior and 56f8xxx

Started by bobtransformer in Freescale DSPs15 years ago

Anybody know exactly how to get a linked and LOCATED listing (combination source/asm .LST)output from codewarrior for the 56F800E ...

Anybody know exactly how to get a linked and LOCATED listing (combination source/asm .LST)output from codewarrior for the 56F800E software ? I can get non-located output it seems like, but except for the simulator, or emulator, each module is referenced at location 00. i.e. I'd like the input to what becomes the .S file... Also, why do


CodeWarrior version 5.0.3 problem

Started by Art Johnson in Freescale DSPs18 years ago 5 replies

Just thought I should warn everyone, I just compiled and downloaded one of our projects using Codewarrior version 5.0.3, and it...

Just thought I should warn everyone, I just compiled and downloaded one of our projects using Codewarrior version 5.0.3, and it locked up solid, the Watchdog Timer times out, and keeps resetting the CPU. I'm just starting to troubleshoot it now. This program was working perfectly under Cod


CodeWarrior problem

Started by in Freescale DSPs18 years ago 1 reply

I have a following problem with CodeWarrior (V.5.XX) debugger: There is not possible to set a breakpoint to few function (at source...

I have a following problem with CodeWarrior (V.5.XX) debugger: There is not possible to set a breakpoint to few function (at source code begin) in some of project sources. (Please note that this is not a case when code is deadstipped because it is not used!). The minus ('-') charact


Stationery problem when creating a project with codewarrior 5.0

Started by rowlandroderick in Freescale DSPs16 years ago

I have just started working with the DSP56F805EVM development board with Codewarrior 5.0 and Embedded SDK 3.0. I've used some...

I have just started working with the DSP56F805EVM development board with Codewarrior 5.0 and Embedded SDK 3.0. I've used some of the examples to download to the board ( flashing LEDs) and they work. Question 1. However, when I wanted to do some maths functions suc


Metrowerks CodeWarrior Debugger Problem

Started by ljube20022000 in Freescale DSPs18 years ago 1 reply

Hi Everyone! I have a problem with CodeWarrior Debugger. It seems that my program stalls when I hit run from the menu. If I step...

Hi Everyone! I have a problem with CodeWarrior Debugger. It seems that my program stalls when I hit run from the menu. If I step over the code until while (1) loop and then hit run it works fine. Also, sometimes i just need to recompile(not making any changes)and then it starts worki


3x faster program downloads

Started by Art Johnson in Freescale DSPs18 years ago 1 reply

We have found that by using the flash_over_jtag.exe application from Motorola, the program downloads to our systems over the JTAG...

We have found that by using the flash_over_jtag.exe application from Motorola, the program downloads to our systems over the JTAG port take about 1/3 of the time when compared to the downloads from the CodeWarrior IDE. This is ***NOT*** a criticism of CodeWarrior, which (of course) is forc


Codewarrior HTI

Started by Gary Lameris in Freescale DSPs17 years ago 2 replies

Has anyone used the Codewarrior HTI for the ethernet to JTAG inteface? We've been blowing up JTAG ports right and left due to...

Has anyone used the Codewarrior HTI for the ethernet to JTAG inteface? We've been blowing up JTAG ports right and left due to switching the parallel unit between our 4 system boards. Also, has anyone tried other ethernet to JTAG convertors with the Metrowerks Code


CodeWarrior DSP56F8xx Simulator

Started by tazbone1998 in Freescale DSPs16 years ago 1 reply

Greetings All, Does anyone know if the CodeWarrior simulator for DSP56F8xx has the capability for file I/O? That is, access...

Greetings All, Does anyone know if the CodeWarrior simulator for DSP56F8xx has the capability for file I/O? That is, access files on the PC hard drive while simulating an app... (I'm aware of fileio capability using SCI, not talking about that...) TIA-


CodeWarrior linker does not check memory limits

Started by Pete Becher in Freescale DSPs17 years ago 3 replies

Hi All, I thought I would post this so others might avoid the problems I was having. CodeWarrior linker does not do any...

Hi All, I thought I would post this so others might avoid the problems I was having. CodeWarrior linker does not do any checking to see if your code is over-running the available pFlash space. I was having a lot of problems when my code got to a certain siz


CodeWarrior Error

Started by Canestrini Fabrizio in Freescale DSPs15 years ago

CodeWarrior Error Hi Working with CodeWarrior release 6.0, using a DSP56F807

CodeWarrior Error Hi Working with CodeWarrior release 6.0, using a DSP56F807


FW: Question About Bugs in CodeWarrior

Started by Art Johnson in Freescale DSPs18 years ago

-----Original Message----- From: Art Johnson Sent: Tuesday, November 12, 2002 9:49 AM To: 'Roger Flor' Subject: RE:...

-----Original Message----- From: Art Johnson Sent: Tuesday, November 12, 2002 9:49 AM To: 'Roger Flor' Subject: RE: Question About Bugs in CodeWarrior Hi Roger, Sorry for the delay in getting back to you, yesterday was a holiday here in


Codewarrior for Motorola DSp ver 5.0

Started by josalfe2002 in Freescale DSPs18 years ago 2 replies

Hi everyone. I'm developing my thesis using Codewarrior for Motorola DSP ver 3.5, but I want to buy the 5.0 academic version...

Hi everyone. I'm developing my thesis using Codewarrior for Motorola DSP ver 3.5, but I want to buy the 5.0 academic version because is cheaper than the non academic version. I want to buy this version in order to use the SDK libraries. My question is: anyone knows what is needed


DSP56858, CodeWarrior, Debug break problem

Started by inneralf in Freescale DSPs16 years ago

Hi, I've pretty much copied the JTAG interface from the motorola EVM for the DSP858 onto my own board. Using V6.1.1 of CodeWarrior...

Hi, I've pretty much copied the JTAG interface from the motorola EVM for the DSP858 onto my own board. Using V6.1.1 of CodeWarrior I can download, run, single step, and kill progams no problem, but I can't break. Inserting a breakpoint in a small program that just increm


Codewarrior tools for DSP56858 and others

Started by Kenneth Ciszewski in Freescale DSPs17 years ago

This is a general question:  how do you feel about the quality/ease of use of the Codewarrior tools and the SDK?  How has it worked...

This is a general question:  how do you feel about the quality/ease of use of the Codewarrior tools and the SDK?  How has it worked to meet the stated goals of getting a prototype up and running quickly in C, then minimizing it for production use?


CodeWarrior lastest version

Started by Oscar Jaramillo in Freescale DSPs16 years ago

Greetings. Where I can download the lastest version of CodeWarrior for DSP56F807?   Regards. Cordialmete, Oscar...

Greetings. Where I can download the lastest version of CodeWarrior for DSP56F807?   Regards. Cordialmete, Oscar Javier Tadeo Jaramillo Galeano. Nit: 98665185-4 Telefono. (+57)300-779-60-62 ?C?m


codewarrior register file

Started by Reggie Vivekananda in Freescale DSPs15 years ago 1 reply

Hi, I'm working on a real-time scheduler for 827 and using CodeWarrior 5 as compiler. The online manuals contais the following text:...

Hi, I'm working on a real-time scheduler for 827 and using CodeWarrior 5 as compiler. The online manuals contais the following text: Page 0 Register Assignment --------------------------------------------------------------------- The compiler uses page 0 address locations 0x30 - 0x40 as register variables. Frequently accessed


Codewarrior 5.02 with SDK 2.4 issue.

Started by Johnson, Jerry in Freescale DSPs18 years ago 1 reply

I have recently (Last Week) received the update to my Codewarrior for DSP56800 compiler (Version 5.0 with patches 5.01, then to...

I have recently (Last Week) received the update to my Codewarrior for DSP56800 compiler (Version 5.0 with patches 5.01, then to 5.02).  As a sanity check before u


Interrupt Code SCI [ motorola 56803 | codewarrior]

Started by Olamide... in Freescale DSPs17 years ago

I know how to write regular sci code and just call them using a while loop. I want to use the SCI interrupt though, so when...

I know how to write regular sci code and just call them using a while loop. I want to use the SCI interrupt though, so when it recieves data, it does what i exactly want it to do at that time. I use codewarrior 4.26, and i am working on a Motorola 56803 board.