Running from flash without the debugger support (DSP56F827)

Started by atid2 in Freescale DSPs17 years ago 4 replies

Hi all, I'm having a hard time running my software directly from the flash of the DSP56F827. I'm using the serial bootloader...

Hi all, I'm having a hard time running my software directly from the flash of the DSP56F827. I'm using the serial bootloader to download the s-record file into the flash, and then it runs ok (even if I push the reset button). But the second I take out the electricity and


Problem with J-TAG interface

Started by orcim in Freescale DSPs15 years ago 2 replies

I need to debug my application with a notebook that don't have a parallel interface; for this reason I get a PCMCIA card that allow the ...

I need to debug my application with a notebook that don't have a parallel interface; for this reason I get a PCMCIA card that allow the link between PC and J-TAG interface. The drivers is "OX12PCI840 PCI Paralll Port" and it is correctly installed because with others application it run. The problem is that the metrowerks debugger don't run.


DSP56311EVM: How do I get started?compiling and debugging C code

Started by chris_dsp in Freescale DSPs14 years ago

Hi, I have been given the DSP56311EVM to do a project on it. I need to write a program in C and execute it on the board using the Debugger....

Hi, I have been given the DSP56311EVM to do a project on it. I need to write a program in C and execute it on the board using the Debugger. I am using g563c to compile the code in "Windows Command Prompt". Any help on compiling and executing C code will be much appreciated. Thanks Christiaan


AW: Looking at registers

Started by Bende Georg in Freescale DSPs16 years ago 1 reply

To view the registers: View/Registers :))) Bonus question: ALT+F7 Debugger/M56800 Target and uncheck "use flash config file"...

To view the registers: View/Registers :))) Bonus question: ALT+F7 Debugger/M56800 Target and uncheck "use flash config file" Georg Bende Softwareentwickler Abteilung Elektronik Dr. Fritz Faulhaber GmbH & Co KG Daimlerstr. 23


strange var assignments in CW5.0.4 w/sdk 2.5 - dsp56807

Started by vagenta in Freescale DSPs17 years ago

I am having very odd variable assigments when using the debugger. Multipart question: 1. First with #defines. In order to...

I am having very odd variable assigments when using the debugger. Multipart question: 1. First with #defines. In order to access a direct memory location on the external data memory space say at $C008 and $C00A, in order for our external logic to interpret the data, we h


Converting an ExtRam project to a flash project

Started by in Freescale DSPs16 years ago

Hi, I have developed my project under SDK and have started with a template containing Flash and ExtRam target. I have only used...

Hi, I have developed my project under SDK and have started with a template containing Flash and ExtRam target. I have only used the ExtRam profile until now, but now I want to put the code into the flash, to be able to disconnect the debugger. I have ExtRam on my hardwar


DSP56803 Emulator/Debugger Tools

Started by mdaly1953 in Freescale DSPs17 years ago 1 reply

We are in the early stages of a project that will use the DSP56803. At present, we are using the SB-USB emulator and BoxView...

We are in the early stages of a project that will use the DSP56803. At present, we are using the SB-USB emulator and BoxView software from Domain Technologies for development and have been having some problems with these tools. Although Domain Technologies' support has been very resp


Problems with DSP56F800DEMO

Started by mhier48 in Freescale DSPs16 years ago 1 reply

Hello!I am a new user to the DSP56F800DEMO board (and to DSP programming), and I have several "beginner problems":- Frequently when...

Hello!I am a new user to the DSP56F800DEMO board (and to DSP programming), and I have several "beginner problems":- Frequently when I try to run a program (with debugger enabled) from CodeWarrior, only the folloing message appears: Program "Flash.elf" is executing. Choo


Using DSP56303EVM as JTAG debugger/programmer

Started by ukkiwikid in Freescale DSPs16 years ago 5 replies

Hi, I am wanting to use the DSP56303EVM to provide a jtag interface to our custom board. If I am correct this should provide me...

Hi, I am wanting to use the DSP56303EVM to provide a jtag interface to our custom board. If I am correct this should provide me with a serial interface to the on board command converter then jtag to our 56311. If any body has done this or sees any problem with it then pl


flash_over_jtag_v2 s-record checksum error

Started by y.dr...@prominent.de in Freescale DSPs14 years ago

Hi every body, i?m using flash_over_jtag_v2.exe with DSP65f8345. until today everithing worked fine. Today i tried to download an knew...

Hi every body, i?m using flash_over_jtag_v2.exe with DSP65f8345. until today everithing worked fine. Today i tried to download an knew version of my application to the dsp and got an error "s-record checksumerror" but i can?t find out why this problem is comming up. the same Program can bedownloaded vie CW-Debugger without any problem


"Find the file named A"

Started by Corey, Rick in Freescale DSPs17 years ago 5 replies

Hi When I run the CW debugger, I often get an error message in a file-select dialog box: "Find the file named A". To appease...

Hi When I run the CW debugger, I often get an error message in a file-select dialog box: "Find the file named A". To appease it, I double-click on any *.c file. The error repeats 2-5 times. The default directory to search in seems to be a dir that I haven't used for


DSP56364 - Complete Development Systems

Started by Jebakumar in Freescale DSPs15 years ago 5 replies

Hi All,                   Can anyone suggest a complete development systems include DSP Compiler / Assembler,...

Hi All,                   Can anyone suggest a complete development systems include DSP Compiler / Assembler, Debugger and JTAG Emulator for DSP56364 .   Thanks and Regards,