OLD MOTOROLA DSP56 EVM's and WINDOWS 7

Started by skel...@tiscali.co.uk in Freescale DSPs9 years ago 3 replies

Hi, I have a MOTOROLA DSP56363 and a MOTOROLA DSP56367 EVM and am using with the supplied degugging software interface supplied with the Motorola...

Hi, I have a MOTOROLA DSP56363 and a MOTOROLA DSP56367 EVM and am using with the supplied degugging software interface supplied with the Motorola EVM's and provided by Domain Technology. I've used both these EVM's sucessfully on varied PC platforms from WINDOWS 3.1 through to WINDOWS 7 (32 bit). I've now trying to run them, without sucess, on a 64 bit Windows 7 platform. I've tried all the var...


Newb: WTB: 56002 EVM

Started by Anonymous in Freescale DSPs18 years ago

As the subject says, Looking for a 56002 EVM module for a 4th year design project. Anyone have one lying around collecting...

As the subject says, Looking for a 56002 EVM module for a 4th year design project. Anyone have one lying around collecting dust? Due to my small (student) budget I can't afford the newer 56303 EVM. But if you have one (or a schematic) for sale I would be interested as we


DSP board

Started by Henry Wijaya in Freescale DSPs19 years ago 1 reply

Hi people, I wanted to expand the external memory on the 563xx EVM boards, but it doesn't seem possible since the EVM boards don't...

Hi people, I wanted to expand the external memory on the 563xx EVM boards, but it doesn't seem possible since the EVM boards don't have any memory expansion connectors. So I was thinking of building a whole new DSP board just by 'following' the EVM's schematics and add as much external


Flash memory on the EVM DSP56311

Started by pociegie in Freescale DSPs16 years ago

How can I use the flash memory on the DSP56311 EVM module, i need to do an independent device from this EVM card, i'dl like to find...

How can I use the flash memory on the DSP56311 EVM module, i need to do an independent device from this EVM card, i'dl like to find out how can i program this flash mamory which is placed on the board, and then make 56311 to use it (boot program from flah to internal program RAM). If


JTAG loses connection with target and flash problem.

Started by embeddeddes in Freescale DSPs15 years ago 1 reply

Hi everyone, This is a two part question but I believe they may be related. I have a board designed around the 56F807...

Hi everyone, This is a two part question but I believe they may be related. I have a board designed around the 56F807 using the evm as a reference. The board has the same external memory configuration as the evm and we program it using Codewarrior IDE 5.1.1 with


DSP56002 EVM

Started by David Warwick in Freescale DSPs18 years ago

Dear Motorola DSP Newsgroup, I am looking for an additional DSP56002 EVM board for a project. I understand these boards...

Dear Motorola DSP Newsgroup, I am looking for an additional DSP56002 EVM board for a project. I understand these boards are no longer in production. Does anyone know where I can obtain another card, or is there anyone who may have a card which is no longer requir


EVM test file

Started by "ralph.harry" in Freescale DSPs12 years ago

Hello, My EVM56309 has a strange behaviour these last days. First, some memory cells are blank in the EVM software DATA window. Second, i...

Hello, My EVM56309 has a strange behaviour these last days. First, some memory cells are blank in the EVM software DATA window. Second, i get impredictable arithmetical results now and then. Is there any test file available, in order to check that the board's main functions (ALU and memory) are working ok? Thanks, Ralph


MOTDSP: Anybody actually used Mot C compiler?

Started by Art Du Rea in Freescale DSPs20 years ago

Illustrious DSP Group Members: Has anyone actually used the freebie Motorola C compiler that comes with the EVM kits to...

Illustrious DSP Group Members: Has anyone actually used the freebie Motorola C compiler that comes with the EVM kits to successfully implement a program on an EVM board? Analog Devices support for C isn't tremendous, but it is one WHOLE lot better than Motorola. A


DEMO56F8014 in stand alone operation

Started by rodr...@yahoo.com.br in Freescale DSPs12 years ago 1 reply

Hi, I'm trying to get the unit of the DEMO56F8014 EVM running in stand alone mode but I have had no success. Does anybody knows if the...

Hi, I'm trying to get the unit of the DEMO56F8014 EVM running in stand alone mode but I have had no success. Does anybody knows if the DEMO56F8014 EVM board can run in stand alone mode (without connection to the debugger in the CodeWarrior IDE) and if there is any document that treats this issue? Any direction will be appreciated. Thank you, Rodrigo


SSI interface to codec on 56F827 EVM board

Started by Lee in Freescale DSPs16 years ago 1 reply

Hi. I have 2 questions regarding using the I2S protocol with the SSI for the 827 EVM board. First, does anyone have any sample code...

Hi. I have 2 questions regarding using the I2S protocol with the SSI for the 827 EVM board. First, does anyone have any sample code for configuring and running the SSI port and the CS4218 codec in I2S mode? I'd appreciate a look at anything similar anyone's done. Secondly, I w


Change of address for ADRIO (EVM STDIO) information.

Started by Art in Freescale DSPs18 years ago

Esteemed and Illustrious DSP Group Members: Sorry if this is posted twice ... my e-mail is all fouled up ... Every once in...

Esteemed and Illustrious DSP Group Members: Sorry if this is posted twice ... my e-mail is all fouled up ... Every once in awhile I still get direct requests about the Moto C compiler for DSPs and my ADRIO (EVM STDIO) package. This is just a change of address notice ...


ADC fix for 56F805DSPEVM?

Started by millindala in Freescale DSPs15 years ago

Hi, I have observed the ADC fix for 56F827 EVM board in the photos section of this group. Does anybody have a similar...

Hi, I have observed the ADC fix for 56F827 EVM board in the photos section of this group. Does anybody have a similar solution to the DSP56F805 EVM board. If so, kindly add the photo in the photos section. Thanks, mahesh


EFCOP of the 56307 EVM

Started by Vincent Meserette in Freescale DSPs16 years ago

Hello, I made a FIR filter test program to test the EFCOP and the data transfer with DMA under the 56307 EVM. (Please see...

Hello, I made a FIR filter test program to test the EFCOP and the data transfer with DMA under the 56307 EVM. (Please see below) The program give me good results when I put $0 in the FDBA and the FCBA registers of the EFCOP, but no when I put another adress, even if this


Replacing the PassThru in code in I2C EEPROM with user code {56720 EVM}

Started by pdj...@blueyonder.co.uk in Freescale DSPs10 years ago 1 reply

Hi Guys I've written and tested my DSP assy code on the 56720 EVM Dev board. Does anyone have any pointer to documentation that will show...

Hi Guys I've written and tested my DSP assy code on the 56720 EVM Dev board. Does anyone have any pointer to documentation that will show me how to overwrite the PassThru code on the EEPROMS, with my own code, to make my Dev board run my program in stand alone mode? Thanks Pete J


DSP 56F807 EVM SCI sending byte.

Started by skyf...@MIT.EDU in Freescale DSPs14 years ago 1 reply

Hello.. I am start to woking with DSP EVM with flash app. I want to send more than 8 bytes at once but my teminal just showed 8...

Hello.. I am start to woking with DSP EVM with flash app. I want to send more than 8 bytes at once but my teminal just showed 8 bytes. For example if I send "abcdefghi" then, my terminal just printed out "abcdedfg". Is there any data limit for the flash app? Or is there any problem to the my code? Here's my co


EVM - External Memory, Bean Inspector, variable allocation

Started by uwmechlab in Freescale DSPs16 years ago

Hello all, I'm having some trouble setting up a test application to utilize the ~256K of external SRAM on board my 56F8346 EVM...

Hello all, I'm having some trouble setting up a test application to utilize the ~256K of external SRAM on board my 56F8346 EVM board. I have found the chip select properties for the CPU Bean (CPU:56F8346) in the bean inspector - where I think I can setup the 128K extern


[ DSP5685x ]

Started by davidgoldmans in Freescale DSPs16 years ago

Does anyone have a working codec for this evm... or can help me write one that works with the Codewarrior 6.0 ...

Does anyone have a working codec for this evm... or can help me write one that works with the Codewarrior 6.0


EVM not working on parallel port

Started by gusf...@yahoo.com in Freescale DSPs14 years ago 1 reply

Hi! My DSP56311EVM is nicely working on my old desktop PC, P3 with win2k. I installed SUITE56 on the laptop (P4, winxp), and the...

Hi! My DSP56311EVM is nicely working on my old desktop PC, P3 with win2k. I installed SUITE56 on the laptop (P4, winxp), and the board seems to be not detected. Any idea of what's going wrong? Thanks!


TI EVM

Started by tqgsa in Freescale DSPs16 years ago

Hi, May i know how connect the TI 6701EVM externally with Pentiuum PC? Is there any need external power supply.Thanking in advance. ...

Hi, May i know how connect the TI 6701EVM externally with Pentiuum PC? Is there any need external power supply.Thanking in advance. Tqgsa


ElectricalFeaturesEVM56858

Started by Jean Adame in Freescale DSPs16 years ago 1 reply

Hi all, I?m develping an audio aplicattion using the DSP56858EVM, now I want to connect an amplifier at the line-in of the EVM...

Hi all, I?m develping an audio aplicattion using the DSP56858EVM, now I want to connect an amplifier at the line-in of the EVM to work with voice signals from a microphone. What I need is to know the information about the electrical characteristics of this or where I can