56F803EVM. flash_over_jtag problem

Started by e_e_f_j in Freescale DSPs14 years ago 4 replies

Hello I?m try to work with my 56F803EVM to download it my software with flash_over_jtag but i can not do it, flash_over_jtag...

Hello I?m try to work with my 56F803EVM to download it my software with flash_over_jtag but i can not do it, flash_over_jtag say: "Target chip refused to enter Debug mode!" here the full info from flash_over_jtag : DSP56F800 Flash loader. Compiled on Dec


56F8013 and flash_over_jtag

Started by Gentcho Nikolov in Freescale DSPs13 years ago

Hello group, I use 56F8013 and CodeWarrior 56800/E 7.2 Flashing is from Development environment. I need to flash 56F8013 with ready .S...

Hello group, I use 56F8013 and CodeWarrior 56800/E 7.2 Flashing is from Development environment. I need to flash 56F8013 with ready .S files using simple program like ?flash_over_jtag.exe?. I have downloaded it from Motorola. Following instructions i have prepared .S records files in CodeWarrior. There is only one problem - ?flash_over_jtag.exe? was build in 2003, so there are configur


F805 and flash_over_jtag

Started by btre...@sympatico.ca in Freescale DSPs12 years ago

Hi, I=92m trying to program a DSP56F805 with flash_over_jtag that came with Cod= eWarrior for 56800/E v7.3. For now, I=92m just trying the...

Hi, I=92m trying to program a DSP56F805 with flash_over_jtag that came with Cod= eWarrior for 56800/E v7.3. For now, I=92m just trying the test program that= =92s in the same folder. Flash_over_jtag flash805.cfg test805.S DSP56F800 Flash loader. Compiled on Jul 23 2003, 15:47:57. version Epsilon 0.7 (c) Motorola 2001 - 2002, MCSL Partial Copyright 2000-2002, Zloba Alexander I/O port d...


Flash_over_jtag vs. Windows XP

Started by matteo_cardin in Freescale DSPs16 years ago 1 reply

Hi all, does anyone use the flash_over_jtag software with Windows XP? I've tried to use it but it crash immediately! Anyone can...

Hi all, does anyone use the flash_over_jtag software with Windows XP? I've tried to use it but it crash immediately! Anyone can help me? Thanks in advance.


flash_over_jtag driver

Started by aaronedsinger in Freescale DSPs15 years ago

hello. i am trying to use flash_over_jtag.exe on win2000. i've followed the installation instructions, however i get the following: ...

hello. i am trying to use flash_over_jtag.exe on win2000. i've followed the installation instructions, however i get the following: ----------------------- DSP56F800 Flash loader. Compiled on Jul 23 2003, 15:47:57. version Epsilon 0.7 (c) Motorola 2001 - 2002, MCSL


flash_over_jtag utility (part 2)

Started by rootesracer in Freescale DSPs16 years ago 4 replies

I downloaded the latest version (07-03-2002) of the flash_over_jtag tool, and accompanying files/docs. Nice to have the docs now, ...

I downloaded the latest version (07-03-2002) of the flash_over_jtag tool, and accompanying files/docs. Nice to have the docs now, but the -? option on the program was all that was needed to get me running. The update tool still does not work for me. I can take my


flash_over_jtag utlity

Started by rootesracer in Freescale DSPs16 years ago

I am trying to use the flash_over_jtag utility, the version that I have is dated 2-21-2002. The program _seems_ to work, that is it ...

I am trying to use the flash_over_jtag utility, the version that I have is dated 2-21-2002. The program _seems_ to work, that is it programs and verifies the target but the code doesnt work right on the target when the utility releases the debgugger. The same s-record when loaded usi


Re: Jtag Flash Loader

Started by Graeme Fisher in Freescale DSPs16 years ago 2 replies

Hi, Does anyone know what modifications I need to make to the flash_over_jtag config/source files to get it to work on the...

Hi, Does anyone know what modifications I need to make to the flash_over_jtag config/source files to get it to work on the DSP56303EVM on its JTAG port. I have all the necessary harware etc. Just need software advice on how to do this Regards Graeme


56F803EVM flash_over_Jtag problem

Started by e_e_f_j in Freescale DSPs14 years ago

I try to check all the board n : I check pin (RESET') 6 in J8 and i found that is always low thats mean that the chip is...

I try to check all the board n : I check pin (RESET') 6 in J8 and i found that is always low thats mean that the chip is always reset? If answer is true, i think that is something wrong. I look a Q1 colector, and that transistor has allways a 0, i think that`s out


Flash over jtag - how to?

Started by robatacp in Freescale DSPs15 years ago

Hi again, I have a new 8323 project ready for low-volume production but cannot seem to get the flash_over_jtag to work. I've...

Hi again, I have a new 8323 project ready for low-volume production but cannot seem to get the flash_over_jtag to work. I've tried using the sample programs and configuration file that comes with the package as well as a small sample program from a CW project. I w


Re: Codewarrior does not erase boot flash 56F807

Started by MW Ron in Freescale DSPs16 years ago

Wim de Haan wrote: > Thank you for your mail and explanation. > However what you describe is a (usefull) work-around, but the...

Wim de Haan wrote: > Thank you for your mail and explanation. > However what you describe is a (usefull) work-around, but the bug is > present. > The program "flash_over_jtag.exe" (from the SDK) erases and programs the > addresses P:0x0000 to P:0


3x faster program downloads

Started by Art Johnson in Freescale DSPs16 years ago 1 reply

We have found that by using the flash_over_jtag.exe application from Motorola, the program downloads to our systems over the JTAG...

We have found that by using the flash_over_jtag.exe application from Motorola, the program downloads to our systems over the JTAG port take about 1/3 of the time when compared to the downloads from the CodeWarrior IDE. This is ***NOT*** a criticism of CodeWarrior, which (of course) is forc


Flash over Jtag

Started by ljube20022000 in Freescale DSPs16 years ago 5 replies

Hi everybody, I am wondering if anyone used flash_over_jtag.exe file that came with SDK. I am getting following error message when...

Hi everybody, I am wondering if anyone used flash_over_jtag.exe file that came with SDK. I am getting following error message when i run this file: DSP56F800 Flash loader - application start version Gamma 0.2 (c) Motorola 2001 - 2002, MCSL 5 flash blocks defined in


AW: 563xx Flash Boot / Image creation

Started by Bende Georg in Freescale DSPs15 years ago 2 replies

You can set up Codewarrior to generate S-Record file for you; then you can upload this file with the flash_over_jtag utility. This...

You can set up Codewarrior to generate S-Record file for you; then you can upload this file with the flash_over_jtag utility. This file includes all code that was generated. Georg Bende Softwareentwickler Abteilung Elektronik Dr. Fritz Faulhaber GmbH & Co KG


flashing with jtag and SDK tools

Started by max_mont in Freescale DSPs16 years ago 1 reply

Hi, I'd like to flash a bootloader on the DSP (56807) with jtag and SDK tool (flash_over_jtag.exe) I take the sample for...

Hi, I'd like to flash a bootloader on the DSP (56807) with jtag and SDK tool (flash_over_jtag.exe) I take the sample for the configuration file. Must I keep all the sections to flash just the bootloader ??? Or can I delete all the sections excepted the boot


Using Parallel Interface Cable with flash_over_Jtag

Started by Jean-Philippe Arbic in Freescale DSPs15 years ago 1 reply

I am curently working on a DSP56F807. I'm wondering how is it possible to directly upload my s-record in the DSP without using a...

I am curently working on a DSP56F807. I'm wondering how is it possible to directly upload my s-record in the DSP without using a EVM. I tried to use a Parallel Interface Cable as described in this document: http://e-ww


"Cannot connect to board" problem

Started by aritidhar in Freescale DSPs13 years ago 3 replies

Hi all, I'm using the DSP56F827 for almost 4 years now. And after I changed computers, I'm having problems with the connection to the...

Hi all, I'm using the DSP56F827 for almost 4 years now. And after I changed computers, I'm having problems with the connection to the board through JTAG. The problem appears with the CodeWarrior and the flash_over_jtag. Plus, it appears on our proprietary board and on the EVM too. I can't connect to the board. The funny thing (not so funny :-( !!


dsp56807 program download with "flash over jtag"

Started by Thomas Erdmann in Freescale DSPs16 years ago

Hello, i want to use the "flash over jtag" Program to download the code to the chips but an error occurs. My call ist:...

Hello, i want to use the "flash over jtag" Program to download the code to the chips but an error occurs. My call ist: "flash_over_jtag flash807.cfg Flash.elf.S -p0x378" and this is the output of the Program: Data @ 0x4B4 ignored Data @ 0x4B4 ig


56800E Flash Programmer GUI version

Started by toche74 in Freescale DSPs13 years ago 1 reply

Hello, 56800E Flash Programmer documentation (56800EFPUG.pdf file) describes a command line version (I have found the...

Hello, 56800E Flash Programmer documentation (56800EFPUG.pdf file) describes a command line version (I have found the flash_over_jtag.exe tool) and also a GUI version that I haven't found. What is the name of the 56800E Flash Programmer GUI version executable file and where can we found it. Regards