Reply by Michael Dunn February 18, 20082008-02-18
Christian,

On Feb 18, 2008 8:05 AM, wrote:

> Hi Damien,
>
> I have the exact same issue/problem as the one you describe below. I wish
> to use my XDS510PP-plus JTAG emulator on a PC that has no parallel port.
> Therefore I am curious to know if you managed to find a way how to do that.

Disclaimer: I have not personally tried this.

I do not think that it will work without special software [I would
like for someone to prove me wrong] unless the emulator is accessing
via the windows pp driver [which I assume that the USB-to-parallel
port adapters hook. If SD's setup appears in the device manager, you
might be in luck.

If you try to use a USB to parallel port converter, make sure that it
supports ECP/EPP/SPP parallel port modes.

Anyone out there with some real experience with this??

mikedunn
>
> Best regards,
> Christian
>
> Dear DSP experts,
> >
> >We own a XDS510PP PLUS JTAG emulator, which works on a parallel port.
> >We would like to use it with a laptop, but as you know most of the
> >laptops are now supplied without parallel port!
> >Therefore, I am interested to know if some of you already used the
> >XDS510PP Jtag with a USB to parallel port converter, and if you
> >encountered any differences or limitations compared to the use of the
> >parallel port.
> >(We cannot afford buying another USB JTAG emulator, however it is more
> >powerful).
> >
> >Best regards,
> >Damien
> >
> >
>

--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467
Reply by csl...@danfoss.com February 18, 20082008-02-18
Hi Damien,

I have the exact same issue/problem as the one you describe below. I wish to use my XDS510PP-plus JTAG emulator on a PC that has no parallel port. Therefore I am curious to know if you managed to find a way how to do that.

Best regards,
Christian
Dear DSP experts,
>
>We own a XDS510PP PLUS JTAG emulator, which works on a parallel port.
>We would like to use it with a laptop, but as you know most of the
>laptops are now supplied without parallel port!
>Therefore, I am interested to know if some of you already used the
>XDS510PP Jtag with a USB to parallel port converter, and if you
>encountered any differences or limitations compared to the use of the
>parallel port.
>(We cannot afford buying another USB JTAG emulator, however it is more
>powerful).
>
>Best regards,
>Damien
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467