On Oct 1, 4:02�pm, "deem" <deemo...@rediffmail.com> wrote:
> Hi,
>
> � � I am very new to DSP/BIOS and DSP?BIOS LINK. I have some basic
> doubts.
>
> regarding DSP/BIOS.
>
> I installed DSP/BIOS in linux.
> I ran some Hello example.its is done well. After this what is the next
> step if i want write my own simple sine wave generation how i do withh
> CCS.
>
> What are the steps .Can u pls tell me.
>
> Next I have OMAP3530 board. I have to connect this board to LINUX machine.
> And i want run some basic dsp programs in that board.
>
> I came to know DSP/BIOS and DSP/BIOS link will do that . Can any one
> please let me know step by step ( pls assume me as very new) procedures.
>
> Thanks & Regards
>
> deem
Many of the TI processors have a sine table in ROM. All you need to do
is step through the table and send the values to your output device.
John
Reply by Ken Asbury●October 2, 20082008-10-02
On Oct 1, 4:02�pm, "deem" <deemo...@rediffmail.com> wrote:
> Hi,
>
> � � I am very new to DSP/BIOS and DSP?BIOS LINK. I have some basic
> doubts.
>
> regarding DSP/BIOS.
>
> I installed DSP/BIOS in linux.
> I ran some Hello example.its is done well. After this what is the next
> step if i want write my own simple sine wave generation how i do withh
> CCS.
>
> What are the steps .Can u pls tell me.
>
> Next I have OMAP3530 board. I have to connect this board to LINUX machine.
> And i want run some basic dsp programs in that board.
>
> I came to know DSP/BIOS and DSP/BIOS link will do that . Can any one
> please let me know step by step ( pls assume me as very new) procedures.
>
> Thanks & Regards
>
> deem
Google "generate sine wave".
Reply by deem●October 1, 20082008-10-01
Hi,
I am very new to DSP/BIOS and DSP?BIOS LINK. I have some basic
doubts.
regarding DSP/BIOS.
I installed DSP/BIOS in linux.
I ran some Hello example.its is done well. After this what is the next
step if i want write my own simple sine wave generation how i do withh
CCS.
What are the steps .Can u pls tell me.
Next I have OMAP3530 board. I have to connect this board to LINUX machine.
And i want run some basic dsp programs in that board.
I came to know DSP/BIOS and DSP/BIOS link will do that . Can any one
please let me know step by step ( pls assume me as very new) procedures.
Thanks & Regards
deem