hi asif
i am also trying to do the same i did the setting that u told ie to
set registeres as u told i am using mic in as an active input but its not
accepting it still when i connect an input to line in pin its considering
that input pls telll me the setting to use mic in as an input
thanks for your responce
by take care
good night
On 4/17/08, asif bagwan wrote:
>
> DSK6713_AIC23_CodecHandle hCodec;
> DSK6713_AIC23_Config config={
> 0x001c,
> 0x001c,
> 0x00d8,
> 0x00d8,
> 0x0015,
> 0x0001,
> 0x0000,
> 0x0043,
> 0x000d,
> 0x0001
> };
>
> ASIFBAGWAN
>
> ----- Original Message ----
> From: nadism Youcef
> To: c...
> Sent: Wednesday, April 16, 2008 6:41:55 AM
> Subject: [c6x] config_AIC23
>
> hi all,
> i want the configuration of the AIC23 (i mean the configuration of the 9
> registers of C6713"volume headphone,analog path ........."), because i need
> to do the acquisition of voice signal to use it in the encryption of voice
> signal.
> thanks all.
>
> ------------------------------
> >
> ------------------------------
>