Hi Bobby and community, Am i intepreting this correctly? Were you able to use a 5402 DSK as an emulator for another 5402 custom board? (Please say yes! because if yes, would you be able to debug and program custum boards without an emulator $1300, and CCS $2000?) If no, has anyone been able to program custom boards (programming flash etc) somehow without a TI emulator or CCS? (Im creating a dual channel wireless headset for the WA Association for the Blind, and funds dont extend to purchasing the $3300 worth of emulator, CCS eqiupment) Any help would be greatly appreciated Andrew Pasquale --- In , Bobby Wijaya <bobby@d...> wrote: > > I think, It was possible, because JTAG is the standard for C54X processor > to communicate with Host. In our laboratory we use both, XDS510 JTAG > emulator and internal JTAG emulator that was embedded in DSK C5402. And > there is no problem at all. > > Life should be a wow, shine and glow..... > > On Tue, 20 Aug 2002, Les Newell wrote: > > > Hi, > > Is it possible to use the C5402 DSK to debug an external C5402 via JTAG? > > I have an application that can't be fully tested on the DSK so I need to be > > able to debug a 'c5402 running on another board. > > > > Thanks, > > Les > > > > > > > > _____________________________________ > > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > > > _____________________________________ > > About this discussion group: > > > > To Join: Send an email to > > > > To Post: Send an email to > > > > To Leave: Send an email to > > > > Archives: http://www.yahoogroups.com/group/c54x > > > > Other Groups: http://www.dsprelated.com > > > > > > ">http://docs.yahoo.com/info/terms/ > > > > |