danisade,
On 6/24/08, danisade wrote:
> we have found that the cables of emu0 and emu1 was
disconnected !!!
> i suppose this explains why hsrtdx not works
> i suppos the regular rtdx not using emu0
HSRTDX gets its speed by transmitting and receiving over a dedicated
directional I/O line [EMU0 or 1] that only contains RTDX data and
protocol.
'Regular RTDX' [also known as JTAG RTDX] shares the JTAG TDI/TDO
channel with 'regular JTAG' which includes a lot more overhead
[=slower]. That is why JTAG RTDX will work with XDS560 or XDS510 Class
emulators. Only the XDS560 contains special serializer/deserialer
hardware to support HSRTDX.
mikedunn
>
> --- In c..., "Michael Dunn" wrote:
> >
> > danisade,
> >
> > On 6/19/08, danisade wrote:
> > >
> > > i have dskc6713 my hsrtdx works with blackhawk lan560
> > > but when i take same project on second pc and use xds560r only
> rtdx
> > > works and high speed rtdx not works and stuck in the line
> > > while ( RTDX_writing != NULL ) {
> > > }
> > >
> > > someone knows any solution should i do somthing special for the
> > > xds560r ?
> > >
> >
> > A project that works with lan560 should work on any other XDS560.
> >
> > Things to check are:
> > 1. Both setups use the same version of CCS and the same target
> board.
> > 2. The configurations are compatible [they will not be identical].
> > Check them by:
> > A. Comparing the CCS configuration text file 'ccBrd0.dat'
at
> > 'C:\CCStudio_v3.3\cc\bin\brddat\'. if there is confusion or
> questions, post
> > both files.
> > B. Verifying that they are using the same driver in CCS setup
> by
> > selecting the 'chip' icon in the left pane and looking at the
> path/driver
> > name in the center pane.
> > 3. If all looks okay it would appear that the vendor supplied
> software for
> > the xds560r might be the source of the problem.
> >
> > mikedunn
> >
> > i change the intvecs.asm to hsrtd set 1
> > > and also checke the enable rtdx , my clock is 10mhs
> > >
> > >
> > >
> >
> >
> >
> > --
> > www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
>
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php