Reply by jjli...@hotmail.com●April 23, 20092009-04-23
On Apr 23, 10:54�am, "jjlind...@hotmail.com" <jjlind...@hotmail.com>
wrote:
> Hello, I intend to use the ADSP-TS201 DSP and would like to include
> ethernet on my board. I thought it might be possible to use the SDRAM
> Inteface on the DSP to connect to an ethernet controller. Can anyone
> recommend an ethernet controller?
>
> Thanks,
> joe
I made stupid error thinking that the ethernet controller could
connect directly to the SDRAM interface, sorry about that. I am still
looking for an easy to configure and use ethernet controller. I was
looking at the Ethernet Controller from Wiznet, the W5300 (http://
www.saelig.com/pr/w5300.htm). If anyone could recommend an easy to
configure and use Ethernet Controller with built-in MAC and PHY
10/100Base-T please let me know. Also, I'll probably just interface
with the ethernet controller via an FPGA rather than direct connect to
the DSP.
Thanks,
joe
Reply by jjli...@hotmail.com●April 23, 20092009-04-23
Hello, I intend to use the ADSP-TS201 DSP and would like to include
ethernet on my board. I thought it might be possible to use the SDRAM
Inteface on the DSP to connect to an ethernet controller. Can anyone
recommend an ethernet controller?
Thanks,
joe