On Tue, 30 Jun 2009 21:02:24 -0500, xyzaxis wrote:
> Hi ,
> This is my first post on this forum, so I apologize if I have posted in
> wrong area.
>
> I want to measure the angle of a rotating crank arm, using an
> accelerometer.
>
> I have XY acceleration data, and a digital one pulse per rev signal.
> Could a Kalman filter be implemented using this data? Cheers
> XYZ
Assuming that the rotating crank arm is attached to an accelerated frame,
and if the ambient acceleration is on the x-y plane.
More pertinent detail will get you more pertinent detail.
--
www.wescottdesign.com
Reply by xyzaxis●June 30, 20092009-06-30
Hi ,
This is my first post on this forum, so I apologize if I have posted in
wrong area.
I want to measure the angle of a rotating crank arm, using an
accelerometer.
I have XY acceleration data, and a digital one pulse per rev signal.
Could a Kalman filter be implemented using this data?
Cheers
XYZ