sciams,
On Wed, Aug 6, 2008 at 9:04 AM, wrote:
> Hi everybody,
> I'm a newbye in DSP development.
> I just buyed a XDS510 USB 2.0 "manufactured" by YUHUA Electronics from an
> ebay Honk Kong reseller.
> Furnished windows drivers are from "SEED International" and seems to be
> installed correctly. But the Emulator Reset Utility can't reset the
device,
> signaling me "SEED USB2.0 XDS510 CARD RESET FAILED, ffff".
Interesting - this is not a standard error message.
Refer to
http://www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
and the archives of this group to run the 'xdsprobe' utility and
post
the results.
mikedunn
> Repeating the reset command while the emulator is
disconnected the message
> is the following: CANNOT DETECT TARGET POWER OR USB DRIVER IS NOT
INSTALLED.
> So the device seem to be detected by the system.
>
> Besides I can't install it under CCS 3.3 (EVM Edition).
> Does anybody can help me in any way?
>
> Thanks a lot!!!
> - sciams -
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php