Reply by dbaudiopro February 4, 20032003-02-04
The Motorola tools (known as Suite56) are freely available from our
tools website:

http://www.metrowerks.com/MW/Develop/Embedded/suite56.htm

If you have the Parallel Port Command Converter these tools are fully
compatible with any 56300 Family EVM...

--- Graeme Fisher <> wrote:
> Hi,
>
> Assuming I have my JTAG cable (paralell command converter) working
> properly, what free debugging/programming tools will be available to
> me?
> I would like to be able to program external flash, step through code,
> and dump register values. I've been told that the free tools are
> available, but will they work on the EVM56303 board? If so, where can
> I
> obtain these tools. Currently I use the the serial port on my DSP
> board
> to download programs using the useful domain technology tools. There
> are
> limits with these, therefore I would like to give myself more control
> of
> the DSP using the JTAG/OnCE interface.
>
> Thanks
>
> Cheers
> Graeme
>


__________________________________________________



Reply by Graeme Fisher February 4, 20032003-02-04
Hi,

Assuming I have my JTAG cable (paralell command converter) working
properly, what free debugging/programming tools will be available to me?
I would like to be able to program external flash, step through code,
and dump register values. I've been told that the free tools are
available, but will they work on the EVM56303 board? If so, where can I
obtain these tools. Currently I use the the serial port on my DSP board
to download programs using the useful domain technology tools. There are
limits with these, therefore I would like to give myself more control of
the DSP using the JTAG/OnCE interface.

Thanks

Cheers
Graeme