Michael- I don't think TI intended the board to be used that way, so it will be some fun things to figure out -- but also very time-consuming from a project development point of view. I think you might have better luck with something like the Audio4 unit with C5410 processor, which has USB support on both host and DSP sides, from Domain Technologies: http://www.domaintec.com/Audio4_5410.html Jeff Brower DSP sw/hw engineer Signalogic JMMTK Future wrote: > > Hi, My name is Michael Andersson. > > I have acquired a TMS320VC5416 DSK which has an USB port on it. > In the documentation, it says something in like "this USB port, with > embedded JTAG controller, eliminates the need for an external emulator". > However it dosnt say, whether it can be used for anything else. > > My question is, does anyone know, if its possible to read from the USB > port, from a program that is running. > More importantly i need the kit, to pop up as an extra drive on the pc, when > I connect it. this means making the kit run with the windows driver > "usbstor.sys". Does anyone know, if its possible to reconfigure the USB > controller, from a program running on the kit, to be a "mass storage > device". > > I would be very grateful for any input, even if its not directly related to > my questions. If you have any information that you think i should know, > regarding the USB on the kit, or precations i should take, please tell me. |