[please reply to only] I don't know what tool versions you are using but this should be close... Go to Register->Core->Other You should be able to select Cache Contents and view it. --- In adsp@y..., "AbhinawP" <abhinawp@s...> wrote: > hi, > > I am running the following instructions on adsp-2106x simulator (targetsp-21060). Even though cache is enabled the instruction in line#4 is taking two cycles (it must take one cycle 'coz instruction will be in cache after cache miss during line#1). > //*-------------- > r1=PM(i8,m8); > nop; > nop; > r1=PM(i8,m8); > //*--------- > > How to view cache contents while running code in simulator? > > thanx > Abhinaw |