Reply by Michael Plante●January 10, 20102010-01-10
>don't be bothered Sami, you can get very good answers here, but the price
>to pay is to live with the arrogance of few frustrated "genius".
Ordinarily. Unless I'm misreading the profile in Google groups, this
seems to be the guy that tried to buy a degree a few weeks ago (different
name, same email).
Reply by Marco.Pausini●January 10, 20102010-01-10
don't be bothered Sami, you can get very good answers here, but the price
to pay is to live with the arrogance of few frustrated "genius".
1. As an introduction to OFDM systems I suggest to have a look at the very
well written books "Wireless Communications", one written by A. Goldsmith,
and the other written by A. F. Molisch. A more in depth treatment is given
in "Orthogonal Frequency Division Multiplexing for Wireless Communications"
by Ye (Geoffrey) Li, Gordon L. Stuber. I also like "OFDM Baseband Receiver
Design for Wireless Communications" by Tzi-Dar Chiueh and Pei-Yun Tsai
2. Have a look at "Contemporary Communication Systems using Matlab", by
Proakis and Salehi.
Marco
Reply by Mark●January 10, 20102010-01-10
On Jan 9, 6:29�pm, Mark <makol...@yahoo.com> wrote:
> On Jan 9, 12:13�am, sami <jehan...@yahoo.com> wrote:
>
> > please i need your advice
>
> > 1_what the best book that explain the idea of OFDM
>
> > 2_ what is the best book for �matlab for digital com
>
> http://www.amazon.com/OFDM-Wireless-LANs-Theoretical-Practical/dp/067...
>
> is a good starting point
>
> Mark
On Jan 9, 12:13�am, sami <jehan...@yahoo.com> wrote:
> please i need your advice
>
> 1_what the best book that explain the idea of OFDM
>
> 2_ what is the best book for �matlab for digital com
> On Sat, 09 Jan 2010 00:33:05 -0600, steveu wrote:
>
>>> Matlab is just a tool. It's a nice tool
>> Now that's just asking to start a fight. :-)
>>
>> Steve
>
> You mean saying it's just a tool, or saying it's nice?
>
> Or have I asked for two fights?
Doesn't Cal Tech offer a degree in Matlab?
Jerry
--
Engineering is the art of making what you want from things you can get.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Reply by Vladimir Vassilevsky●January 9, 20102010-01-09
sami wrote:
> please i need your advice
>
> 1_what the best book that explain the idea of OFDM
>
> 2_ what is the best book for matlab for digital com
>>Matlab is just a tool. It's a nice tool
>
> Now that's just asking to start a fight. :-)
>
> Steve
You mean saying it's just a tool, or saying it's nice?
Or have I asked for two fights?
--
www.wescottdesign.com
Reply by steveu●January 9, 20102010-01-09
>Matlab is just a tool. It's a nice tool
Now that's just asking to start a fight. :-)
Steve
Reply by Tim Wescott●January 9, 20102010-01-09
On Fri, 08 Jan 2010 21:13:24 -0800, sami wrote:
> please i need your advice
>
> 1_what the best book that explain the idea of OFDM
>
> 2_ what is the best book for matlab for digital com
1: I dunno, sorry.
2: Asking that question is like asking "What is the best book for using
a Stanley Hammer for frame carpentry?"
Matlab is just a tool. It's a nice tool, but it is nothing more than a
tool. Moreover, it is not the only tool for the job -- Scilab and Octave
are both good tools to use that function very similar to Matlab, and
tools like Mathematica, MathCad. Not to mention C, or even Fortran if
you're into the classics.
Just as you need to know a lot more to do frame carpentry than how to
pound a nail, you need to know a lot more about signal processing and
comms than how to type into Matlab.
--
www.wescottdesign.com
Reply by sami●January 9, 20102010-01-09
please i need your advice
1_what the best book that explain the idea of OFDM
2_ what is the best book for matlab for digital com