I have experimented with uCOS version 2.51 using the 807 eval kit and the|
RTOS works very well. The testing only used semaphores and the task time
delay features (no msg boxes, queues, mutex etc.). The processor usage
overhead is minimal, about 1 - 2%. ROM usage is a little less than 1K and
RAM is about 580 bytes. It is pretty straight forward to use and the
Motorola port works fine. If you need a RTOS it would be a good choice.
The best starting place is Jean Labrosse's book on uCOS-II. You can get it
online. It comes with uCOS-II version 2.04, so you will need to upgrade to
2.51 (the port supports 2.51). The book gives you a good insight on how to
use the RTOS. You can get more information by going to www.usos-ii.com.
From: Roelof Oelofsen [mailto:]
Sent: Wednesday, February 06, 2002 1:31 AM
Subject: [motoroladsp] RE: RTOS Hi,
Did you see my last e-mail on the RTOS? If so, a simple yes or no will
do, thank you.
Note: If you do a simple "reply" with your email client, only the author of
this message will receive your answer. You need to do a "reply all" if you
want your answer to be distributed to the entire group.
About this discussion group:
More Groups: http://www.dsprelated.com/groups.php3 ">http://docs.yahoo.com/info/terms/