hieu,
On Tue, Mar 24, 2009 at 9:43 AM, hieu dang wrote:
> Thank for your helping but I don't understand
more about your answer.
> I set up CCS and Matlab likely user's guide.
>
> Exactly, when I use "Embedded Target for TI C6000(tm) DSP toolbox in
> matlab, I need to test my hardware and software installation to be sure
> everything works, in "Confirming Your C6711 DSK Installation"
>
> This is a guide in the toolbox for the testing.
> To run the C6711 DSK confidence test, complete the following steps after
you
> install and configure your board.
>
> Open a DOS command window.
> Access the directory \..\ti\c6000\dsk6x11\conftest CCS creates this
> directory when you install your CCS software. It contains the files to run
> the C6711 confidence test.
> Start the confidence test by typing dsk6xtst at the DOS prompt. By default,
> the test utility creates a log file named dsk6xtst.log where it stores the
> test results. To specify the name and location of a log file to contain the
> results of the confidence test, use the CCS command line options to run the
> confidence utility. For further information about running the confidence
> test from a DOS window and using the command line options, refer to the
"DSK
> Confidence Test" topic in the online help for CCS.
> Review the test results to verify that everything works.
>
> If your confidence test fails, reconfigure your C6711 DSK. After you change
> your board configuration, rerun the confidence utility to check your new
> settings.
>
> When I run the C6711 DSK confidence test, it makes the following mistake. I
> tried to repair, but I dont know exactly I have to do. Please help me.
>
> C:\>ti\c6000\dsk6x11\conftest\dsk6xtst
> TMS320c6211/6711 DsK Confidence Test, Version 2.01, May 2001
> Copyright 2001 by Texas Instruments Incorporated.
> All rights reserved
> Test Run Time: 09:16:19 PM Test Run Date: Mar 24, 2009
> ERROR: please specify a valid board configuration file via the -f option.
>
Have you ever run CCS setup??
mikedunn
>
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
_____________________________________