On Jun 15, 4:27�pm, "alberto.fuggetta"
<alberto.fuggetta@n_o_s_p_a_m.gmail.com> wrote:
> Hi,
>
> I'm simulating a DFE equalizer in Matlab for a MSK modulated signal.
> The channel I'm testing is Ricean with max doppler shift of 50 Hz.
> I noticed that the performance of the DFE deeply improves if I apply the
> derotation before sending the samples to the equalizer.
> Has anybody ever observed the same behavior?
> Does any theoretical explanation for this phenomenon exist?
> Thanks
>
> Alberto
Rotation implies a frequency offset
Freq offset implies the phase offset is always changing
Your DFE is chasing a changing phase offset.
So no suprise when you remove the rotation, your DFE works better.
Clay
Reply by Vladimir Vassilevsky●June 15, 20102010-06-15
alberto.fuggetta wrote:
> Hi,
>
> I'm simulating a DFE equalizer in Matlab for a MSK modulated signal.
> The channel I'm testing is Ricean with max doppler shift of 50 Hz.
> I noticed that the performance of the DFE deeply improves if I apply the
> derotation before sending the samples to the equalizer.
> Has anybody ever observed the same behavior?
> Does any theoretical explanation for this phenomenon exist?
Your model of the channel is wildly inadequate.
Vladimir Vassilevsky
DSP and Mixed Signal Design Consultant
http://www.abvolt.com
Reply by alberto.fuggetta●June 15, 20102010-06-15
Hi,
I'm simulating a DFE equalizer in Matlab for a MSK modulated signal.
The channel I'm testing is Ricean with max doppler shift of 50 Hz.
I noticed that the performance of the DFE deeply improves if I apply the
derotation before sending the samples to the equalizer.
Has anybody ever observed the same behavior?
Does any theoretical explanation for this phenomenon exist?
Thanks
Alberto