Reply by Pete Gray March 14, 20032003-03-14
The exact hardware requirements will vary depending
upon the board you're using, but the requirements for
Motorola's 807 EVM are in the CodeWarrior SDK (which I
believe is available from Motorola's site).

Regardless of the board, there are software
requirements too. I've recently implemented Serial
Bootloader support for the 805 (on NMI's IsoPod) with Small C.
Details on my homepage.

http://home.attbi.com/~petegray

Regards,
-Pete. --- In , "markonikoff" <markonikoff@y...>
wrote:
> Hello,
>
> I would like to know in detail about the hardware
> requirements for using the serial bootloader for on-chip flash
> programming on DSP56F807.Also I haven't got the targeting manual
for
> the DSP56F807 on motorola website. Kindly help me for the same..
>
> Regards
> Mark


Reply by markonikoff March 13, 20032003-03-13
Hello,

I would like to know in detail about the hardware
requirements for using the serial bootloader for on-chip flash
programming on DSP56F807.Also I haven't got the targeting manual for
the DSP56F807 on motorola website. Kindly help me for the same..

Regards
Mark