Hi, replying to myself again. The reseting loop counters are caused by the linker allocating overlapping addresses for the counter and my array data. Why it does so? I don't know. Still haven't figure out the un-initializabilty of global variables : ( Yeo Han Kwang --- In c6x@y..., "Yeo Han Kwang" <snoopyeo@y...> wrote: > Hi, me again. > > I'm developing using 6711DSK w/ CCS2.0 on WinNT. > > The CCS gives three options for linker auto initialization. > I've get problem when compiling with any of them. > > 1) Load time auto initialization > An outer "for" loop in one of my procedures executes infinitely > because the (integer) counter resets to zero when it reaches the end > value of the loop :( > > 2) Run time auto initialization > A 2nd level "for" loop in my main program executes infinitely because > the counter resets midway through the loop :( > (The problem mentioned in 1 disappears.) > > 3) No auto initialization > My global variables are not initialized. > e.g. when i declare: > double 2PI = 3.14xxx + 3.14xxx; > The value is not 6.28xxx when I view it in the watch window. The > value of 2PI is a very small number x.xxx...e-3x |