|
Seto, The only way I am able to reproduce this error is as follows (might give you hints about what you are doing wrong as well): 1. I make sure that I do not have the tools.lib created by making the tools.mcp subproject. 2. I deselect "tools" as a subtarget of the "External RAM" target in the Targets panel of the project window. After doing this I get the following error: Could not find or load file "tools.lib" for target "External RAM" for project "pwm.mcp" If I could attach screenshots here I would, but if you don't understand, simply reply to my email and I can send screenshots to explain. Regards, John --- In , "seto_dsp56" <seto_dsp56@y...> wrote: > > Hi, > > While building any example project (adc, pwm etc in DSP56F807EVM) > I m getting following errors. > ========================================= > Can't write link map "". > > An unknown error occurred when linking target "tools" for > project "tools.mcp". > > Could not find or load the file "tools.lib" for target "External RAM" > for project "pwm.mcp". > =========================================== > > please help... > > SETO |