I have C code here for the ST1167 device which came from the ST website.
It supports the following: M29F102BB M29W102BT M29W102BB but is easy to adapt. HTH ----- Original Message ----- From: "Jean Viljoen" <> To: "C54x DSP Discussion Group" <> Sent: Friday, February 14, 2003 6:15 AM Subject: [c54x] C5402 Flash programmer > Dear group > > I have a custom C5402 board with ST Micro 1MB Flash memory. I need to > write the algorithm to program this flash with the program that will run > on the micro. Does anyone have some pointers as to where to start, or > maybe some code that I can adapt for my application? > > If I can lay my hands on the code for the Flash Burn utility as shipped > with the C5402 DSK, I am sure I can easily adapt that. > > Rgds > > Jean Viljoen > Azoteq (Pty) Ltd > > Tel +27 21 863 0033 > Fax +27 21 863 1512 > > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c54x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ > |