Reply by Bende Georg ●May 19, 20032003-05-19
You have to follow these steps:
U set the target to "FLASH" in the IDE (now you should see "RAM")
Go to the settings window, select "Debugger/M56800 target settings"; if you
select here "Always load program at debugger launch" then CW will do the
download for you. It is very slow, but if U have a small code it is more
comfortable.
If you want to use the program "flash_over_jtag", which is very fast, then go to
"Linker/M56800 Linker", and select "Generate S-record file". Then the linker
will generate files like "application.elf.p.s", "application.elf.x.s" and
"application.elf.s". p is for program code, x is xflash and the last one
contains both.

Georg Bende
Softwareentwickler
Abteilung Elektronik
Dr. Fritz Faulhaber GmbH & Co KG
Daimlerstr. 23
71101 Schaich
Tel: +49 7031 638294

> -----Ursprgliche Nachricht-----
> Von: Joe McCarron [mailto:]
> Gesendet: Sonntag, 18. Mai 2003 03:22
> An:
> Betreff: [motoroladsp] internal flash
>
> I've got a couple of questions. I've been through
> the docs but I cant seem to get the ansewer.
>
> I'm using a 805evm & code warrior 3.5 (SDK 2.1.1)
> I'd like to download my code to
> internal flash. Right now its being downloaded
> to external ram. I've done a search on the msg board and
> found out about the flash_over_jtag exe. I dont know
> how to generate the S record from the project files. Can the IDE
> be used to generate the SREC file, then use the flash_over_jtag exe
> to download to internal flash?
>
> As you can see I'm wicked confused about tools to use :?
>
> Thanks
> Joe >
>
> _____________________________________
> Note: If you do a simple "reply" with your email client, only the author
> of this message will receive your answer. You need to do a "reply all" if
> you want your answer to be distributed to the entire group.
>
> _____________________________________
> About this discussion group:
>
> To Join:
>
> To Post:
>
> To Leave:
>
> Archives: http://www.yahoogroups.com/group/motoroladsp
>
> More Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/
>