RE: [c6x] Code Composer
The DSK product includes a version of CCS that is limited in
size and scope in the following ways:
1) The DSK version will only load a program which has a
.text section of 256Kbytes or less. The EVM / Full Tools includes a
version that is not limited in size.
2) The DSK version does not include the simulator, while the
EVM / Full version of CCS includes the simulator. The simulator will allow
a user to simulate the operation of other C6000 DSP Family members, not just the
C6x01 processor on the board.
Regards,
Tom Dillon
-----Original Message-----
From: d...@bernardotti.al.it
[mailto:d...@bernardotti.al.it]
Sent: Monday, December 30, 2002 1:53 AM
To: c...@yahoogroups.com
Subject: [c6x]
Code Composer
Hello c6x,
I bought the tms320c6711 DSK board and also the EVM
tms320c6701/6201
board.
In these packeges I've found two release of
code composer .... all
versions are 2.1.
If I install the EVM version it install the driver
dor this board.
When I try to install the DSK version it
don't recognize the
installed version and it try to create a new
installation of code
composer.
Do you known if there are some methods to use all
boards in one
systems without install two Code Composer ?
There are many things that I don't understand
.....
Why the EVM tms320c6701-6201 price is 3500$ and the
DSK TMS320C6711
price is only 295$ ?
When I've asked to Texas commercial the answer
was "Because in EVM
there is also a Code Composer license".
But this is not correct because also in DSK board
there is a Code
Composer license.....
--
Best regards,
dsp
mailto:d...@bernardotti.al.it
--
FLAVIO BERNARDOTTI
AMC Italy srl
Biometric Security Solutions
Research and development department
Via La Pira, 21
10028 TROFARELLO (TO)
ITALY
Tel. +39 011 6804011
Fax. +39 011 6804014
Direct. +39 380 7097051
+39 347
5610956
Company site :
http://www.amcitaly.net
http://www.biotracciabilita.info
Personal site:
http://www.crackinguniversity2000.it
http://www.bernardotti.it
http://www.bernardotti.al.it
_____________________________________
Note: If you do a simple "reply" with your email
client, only the author of this message will receive your answer. You need
to do a "reply all" if you want your answer to be distributed to the
entire group.
_____________________________________
About this discussion group:
To Join: Send an email to c...@yahoogroups.com
To Post: Send an email to c...@yahoogroups.com
To Leave: Send an email to c...@yahoogroups.com
Archives: http://www.yahoogroups.com/group/c6x
Other Groups: http://www.dsprelated.com
" TARGET="_blank">http://docs.yahoo.com/info/terms/
|