Sankar,
I'm not sure about the Delfino series.
All the TMS320c28xx series of DSPs have a boot rom.
The boot rom has a special location in FLASH that it will jump to when the
appropriate boot mode is used.
Therefore, using the appropriate boot mode and placing a instruction to jump
to
the code start address at the 'special' FLASH location results in
booting in FLASH.
However, some of the DSPs have a different feature, especially the 6000
series,
where if the appropriate boot mode is used, then the first 1024 bytes of
flash
are copied to RAM and executed.
Either of the two above methods make it easy to create a system that boots
into
FLASH.
R. Williams
---------- Original Message -----------
From: s...@hotmail.com
To: c...
Sent: Mon, 13 Sep 2010 11:47:19 -0400
Subject: [c6x] x28 Series DSP Flash !
>
>
> Hi everyone,
>
> Does any one know if i can boot from Flash inside x28 series Delfino
floating
point DSP. I need to save real estate for my design. I would like to use
Delfino
for my design if i do not have to use External Flash for booting.
>
> Thanks
>
> Sankar
>
>
------- End of Original Message -------
_____________________________________