--- In , "isierra95" <isierra95@y...>
wrote: > Bruno,
> Are you using Windows XP?
>
> Regards,
> Irene
>
> --- In , "Bruno Tremblay"
> <btremblay@g...> wrote:
> > Hi,
> >
> > I'm trying to reprogram the 56F800DEMO board that I just
> received with a
> > simple flashing led application. Most of the time, the download of > the
> > flash.elf does not complete. It's just freeze or a Program
load
> failed
> > message appear on the screen. If the download succeeds, the
> application
> > doesn't start in stand alone or debug. Does the board need a
> special trick
> > or should I install a crystal instead of the internal relaxation
> oscillator?
> >
> > I also tried the download the bootloader that came with the
> SDK and the
> > download box disappear before the bar reaches the end. Noting seem > to work.
> >
> > I use the 805EVM for sometime but I want to use the 801 for
> smaller
> > applications.
> >
> > Thanks
> >
> > Bruno
Reply by isierra95●June 30, 20032003-06-30
Bruno,
Are you using Windows XP?
Regards,
Irene
--- In , "Bruno Tremblay"
<btremblay@g...> wrote: > Hi,
>
> I'm trying to reprogram the 56F800DEMO board that I just received with a > simple flashing led application. Most of the time,
the download of the > flash.elf does not complete. It's just freeze
or a Program load failed > message appear on the screen. If the download
succeeds, the application > doesn't start in stand alone or debug. Does
the board need a special trick > or should I install a crystal instead of the
internal relaxation oscillator? >
> I also tried the download the bootloader that came with the SDK and the > download box disappear before the bar reaches the
end. Noting seem to work. >
> I use the 805EVM for sometime but I want to use the 801 for smaller > applications.
>
> Thanks
>
> Bruno
Reply by isierra95●June 30, 20032003-06-30
Bruno,
There is no special way to download onto the flash of the
board. You should just be able to make your project and download
your project. I have actually seen what you are experiencing and I
am looking into this issue at this time.
Regards,
Irene
--- In , "Bruno Tremblay"
<btremblay@g...> wrote: > Hi,
>
> I'm trying to reprogram the 56F800DEMO board that I just received with a > simple flashing led application. Most of the time,
the download of the > flash.elf does not complete. It's just freeze
or a Program load failed > message appear on the screen. If the download
succeeds, the application > doesn't start in stand alone or debug. Does
the board need a special trick > or should I install a crystal instead of the
internal relaxation oscillator? >
> I also tried the download the bootloader that came with the SDK and the > download box disappear before the bar reaches the
end. Noting seem to work. >
> I use the 805EVM for sometime but I want to use the 801 for smaller > applications.
>
> Thanks
>
> Bruno
Reply by Bruno Tremblay●June 26, 20032003-06-26
Hi,
I'm trying to reprogram the 56F800DEMO board that I just received with a
simple flashing led application. Most of the time, the download of the
flash.elf does not complete. It's just freeze or a Program load failed
message appear on the screen. If the download succeeds, the application
doesn't start in stand alone or debug. Does the board need a special
trick
or should I install a crystal instead of the internal relaxation oscillator?
I also tried the download the bootloader that came with the SDK and the
download box disappear before the bar reaches the end. Noting seem to work.
I use the 805EVM for sometime but I want to use the 801 for smaller
applications.