Have you tried to disconect the XDS510PP ?? It might be the emulator that has jamed and are holding the board in reset. I still have a XDS510PP somewhere that suddenly decided to corrupt its eeprom just like that. /Regards, P Ligander rworne wrote: >I have a C6711 DSK and a Spectrum Digital XDS510PP w/ a full Code >Composer Studio. > >I was working on some interrupt code when the PC decided to take a >road trip and locked up the card. > >Now when the card is reset, the three LEDS stay lit and I cannot get >the card go go through POST. CC Studio cannot talk to the card >either. > >Is there some way to unwedge the card, or does it have to be sent >back to TI? > > >_____________________________________ >Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > >_____________________________________ >About this discussion group: > >To Join: Send an email to > >To Post: Send an email to > >To Leave: Send an email to > >Archives: http://www.yahoogroups.com/group/c6x > >Other Groups: http://www.dsprelated.com >">http://docs.yahoo.com/info/terms/ > > |