Reply by Lionel Degoutte July 18, 20032003-07-18

DSP56F807 has 4 timers modules. Each timers modules countains 4
counter/timer groups.
Each counter/timer group has capture register which is loaded when an input
change (depends of the capture mode in Status an Control register).
Apparently, the 4 capture registers of the 4 counter/timer groups of a timer
are loaded whatever the inputs which change.

It is possible to assign input 1 to capture of counter/timer group 1, input
2 to capture of counter/timer group 2, etc.. ?

Thanks you.