Fabio -----Original Message-----
From: aaronedsinger [mailto:]
Sent: sado, 19 de julho de 2003 14:19
Subject: [motoroladsp] using SDK in 56F807 Hi, I have a few newbie questions. I am using the SDK on the 56F807
evaluation module. If I create an Flash_Application from SDK
stationary, the default project works fine. However:
- If I look at the code size, the dspfunc.lib, bsp.lib, and msl c
56800.lib are larger than the availabe on chip flash/ram. It seems
that I shouldn't be able to use the SDK in flash?
>>You can use SDK projects to run from Flash. The size showed in the CodeWarrior
window is the total size of these libraries. However, the linker removes all
unused code (deadstripping) from the SDK libraries.
-If I add a printf statement to the default main.c, the debugger
stops at the printf when run. If I step over the statement, the
debugger jumps to configUnhandledInterruptISR. Why don't I my printf
in the console window?
>> printf consumes a large block of RAM, so when running from internal memory
you will probably need to use another method of displaying, like SCI.
Thanks so much for any help.
MIT AI Lab
Note: If you do a simple "reply" with your email client, only the author of this
message will receive your answer. You need to do a "reply all" if you want your
answer to be distributed to the entire group.
About this discussion group:
More Groups: http://www.dsprelated.com/groups.php3 ">http://docs.yahoo.com/info/terms/